Oklahoma Drainage – We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.
If You live in Oklahoma City and water damaging your foundation, We can install a French Drain for you.
If you live in Norman and have water standing on your driveway, We can install a Channel Drain for you.
If you live in Edmond and have water flooding your basement, We can install a Sump Pump for you.
If you live in Moore and have water washing out your flower bed mulch, We can install a Surface Drain for you.
If you live in Yukon and need grass to grow we can install Sod too!
Oklahoma Drainage has been diagnosing and solving Drainage Problems since 1993. Water has the ability to get into places around your home where you really don’t want it to be. Some drainage problems are easy to solve. Typically water enters the problem drainage area one way from one source. The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources. Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.
French Drain Installation can be a big part of installing a Drainage System. A French Drain is not the only type of Drain that can be used. A Drainage System can utilize several types of drains including a French Drain, Surface Drain, or Channel Drain.
Installing Gravel on top of a 6 inch French Drain
A French Drain is completely different from a Surface Drain. A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. A Trench Liner is sometimes used depending on the Drainage System Design and the type of soil. The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe. This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used. There are several sizes of French Drain Pipe. Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed.
Surface Drain Installation in Oklahoma City
