Yukon French Drain Installation

 

Oklahoma Drainage has been installing French Drains, Surface Drains, Sump Pumps and Sod since 1993.

The term, “French Drain” gets thrown around a lot.  Many times people say they need a “French Drain,” when they mean Surface Drain, or Channel Drain.  It is becoming a Catch-All Phrase that may refer to any type of drain.  French Drains provide specific benefits that are different from Surface Drains.

This is not a French Drain.

Channel Drain Installation

Channel Drain Installation

This is a Channel Drain which is a type of Surface Drain, but is not a French Drain.

French Drain Installation

French drain Installation
with trench liner and pipe filter

Above is a picture of a French drain

 

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drain Pipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drain Pipe.

 

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed.

French Drain March 2011

French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations. It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

Connecting Gutter to French Drain

The main downfall of a French Drain is that they, for the most part aren’t very pretty. They don’t look very nice in a yard once they are completed.

Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone. Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel. This is Ok. It won’t have a measurable effect on the performance of the drain.

DONT COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT. THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT. DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

 The French Drain Installation we did this week was a little more difficult than normal.  Many times the route that a Perforated French Drain Pipe must travel to its exit point is not very easy from an installation point of view.  French Drains may have to travel through tree roots, (big ones) under sidewalks, through retaining walls, around swing sets or dog kennels or Mom’s Prize Rose Bush.  The 4 inch French Drain we installed this week was in Oklahoma City south of 23rd in an old part of town where all the houses were old 2 or 3 story homes with lots of huge Elm Trees.  The Elm Tree in Question actually was just an old stump that had been topped out but not completely removed.  They left the roots just for us!  The roots were growing into the homes foundation and were right in the way of the path of the French Drain.  Forty feet of solid Elm Roots and 4 chain-saw blades later We were successful in running a new French Drain through a tree stump.  Yuck! “Well you gotta  do what you gotta do!”

 

French Drain with colored river rock

French Drain with colored river rock

A little info about French Drain Pipe and Tree Roots.  Normally tree roots don’t seek out and penetrate French Drain Pipe.  Tree roots seek moisture and residual water that may stay inside Solid Drain Pipe.  French Drain Pipe is perforated.  Water that does not reach the exit point of the French Drain will seep out of the Pipe into the surrounding dirt.  Solid Drain Pipe that is used with Surface Drains can be penetrated and eventually clogged by roots if the pipe does not have good slope or “Fall”.  If the solid pipe does not drain well and has residual water, tree roots will seek it out.

Drain Pipe running from French Drain to the street in Oklahoma City

Drain Pipe running from French Drain to the street in Oklahoma City

Drainage Systems are designed to protect your home or business from standing water.  Storm-Water Runoff can cause damage in many ways.  Water from your gutters can seep down into your home’s foundation if it has no good way to drain off.  If the temperature then drops below freezing, the water around your foundation can freeze and cause serious damage to the home’s foundation.  Foundation repair can cost more than a Drainage System.

Drainage Systems typically make use of , French Drains, Surface Drains, or Channel Drains.  Depending on the Drainage Problem, A Drainage System may utilize one or several types of DrainsWe might install, for example, A Surface Drain in the middle of a driveway that runs to a gutter that is connected into the drain pipe.  The Drain Pipe might continue to a French Drain running parallel to a homes foundation.  Next the drain pipe might continue to a channel drain cutting across a sidewalk.  The Drain pipe might then reach its exit point running out through a curb fitting installed and cemented through the curb.

A Surface Drain basically is a basin that has a grate on the top.  A drain pipe is connected to the basin below ground.  The water flows in through the grate and down into the basin.  The water then exits the Basin through the Drain Pipe and move toward the exit point of  the Drainage System.  Surface Drains are designed to handle water that accumulates in a low areas.   These areas should not be too large or broad, and the water that drains into a surface drain should not be moving very fast.  Surface Drains can become overwhelmed if they are placed in an area that must move a large volume of water, quickly.  Selecting the correct drain for the specific drainage problem is a benefit that Oklahoma Drainage and  provides through 30 years of experience.

 

Comments
  1. […] French Drain Information, Yukon, Oklahoma City, Norman, Edmond March 10, 2015The term, “French Drain” gets thrown around a lot.  Many times people say they need a “French Drain,” when they mean Surface Drain, or Channel Drain.  It is becoming a Catch-All Phrase that may refer to any type of drain.  French Drains provide specific benefits that are different from Surface Drains. Just what is a […] blanecallen […]

Leave a Reply