French Drain Expert Moore.

 

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

Do You have water in a place in your home or business that is a Problem?

Do you need help?

Oklahoma Drainage – 405 203 9419

We Install Drainage Systems to fit various needs for homeowners an businesses.  A Drainage System can utilize French Drains, Surface Drains, Channel Drains or Sump Pumps as the intake part to the Drainage System.

The Drain or Sump Pump brings water into the Drainpipe.  The Drainpipe takes the water to the ” Exit.”  Which is Either a “Curb Outlet” or a “ Pop Up Emitter.”

The Three parts of A Drainage System are:

THE  INTAKE (French Drain or Surface Drain ) etc.  The TRANSITION ( The Pipe) which can be many sizes or type. The EXIT ( A Curb Outlet or Pop Up Emitter )

new curb outlet

Curb outlet with more than 6 inches of fall

new curb outlet

Curb Outlet as an Exit Point for a French Drain in Edmond

The Drainage

part of our company name means that we solve water problems for people in Oklahoma.  Heavy rain is becoming more common.  Back in 1993 when I first started, a hard rain was considered to be about an Inch per/hour.  It was fairly rare but not too uncommon.  Today things are different.  A weather report of rain fall at or above 4 inches per/hour was not uncommon in 2019.  Excess water causes all types of damage to property both residential and commercial.

Our Drainage Systems drain water away from places you don’t want it to be.  You might have water standing along the foundation of your house, or inside your basement.  You might have water on your driveway or flowerbed too.

Designing a French Drain or a Drainage System

When I talk to a potential customer while doing a Drainage System estimate, I take a lot of things into consideration.  First I have the Customer show me where water is standing or where it is going that it shouldn’t.  This is part of defining the specific problem area.  Sometimes the Water Problem Area is larger and more involved than the customer realizes.  Once the Water Problem Area is clearly defined,  the next step is to determine how the water is getting to the problem area.  Many times there is more than one Water Source to the Water Problem area.

A big mistake

in Drainage System Design is to stop once the most obvious Water Source is found.  A Drainage System Designer must be a detective to some degree.  For Example:  Water running down the hill and onto the back patio might be the most obvious water source.  Sub-surface water or a neighbor’s new gutter downspout could also be contributing.  Most of the time water gets into the problem area from more than one source.

Next you must decide where to take the water.  This is determining an Exit Point for the Drainage System.  If possible, you want your exit point to be down hill from the problem area.  If it is up hill in all directions from the problem area, then the only solution is a Sump Pump.

Once an exit Point is determined, you must ask yourself if there is any way to install two exit points.  Usually this can only work when an exit point can work on both ends of a Drainage System.  The benefit of two Exit Points in a Drainage System is it greatly increases the water capacity for the Drainage System.  It can move much more water faster during a heavy rain than a system with just one Exit Point.  Most Drainage Systems can only utilize one Exit Point.  In 21 years of Drainage System Installation,  I would say 10% of our Drainage Systems have two Exit Points.

Leaking Pipes

 

Sprinkler pipes may leak for many reasons.  Pipes that are too shallow can freeze and break during the cold of winter.  Repair of PVC Sprinkler pipe in cold temperatures can be difficult.  Frozen Ground is difficult to dig up to get to the damaged pipe.  PVC Glue and Primer don’t bond very well in temperatures that are low.  Even using “Hot Glue,” which is designed to be used in cold temperatures doesn’t always produce the best results.

I use a Heat Gun to warm the new PVC Pipe Fitting so the Hot Glue will bond correctly.  This stops the leak and ensures that the Sprinkler Pipe Repair Will Last.

Fixing a Sprinkler Pipe Leak in cold temperatures

can be very difficult.  It takes a person who is willing to get wet when the temperature is below 32 degrees.

Digging in Frozen Ground isn’t easy either.

Oklahoma Drainage and Sprinkler Repair can provide the necessary expertise to handle difficult sprinkler repairs.

Oklahoma Drainage and Sprinkler Repair provide Expert Service for Sprinkler Heads, Valves, Controllers and all other Sprinkler System difficulties.  We service Norman, Edmond, Oklahoma City, Moore, Yukon, Mustang, and Midwest City.

Sometimes things go wrong with sprinkler systems.

 

One Common problem

is that they continue to run and won’t shut off.  In most cases this is a problem with a sprinkler valve that has “Stuck” in the on position.

This can be temporarily solved by shutting of the Emergency Shutoff Valve.  The problem is that some sprinkler systems don’t have one to turn off or if they do the homeowner doesn’t know where it is.

It may be on the back-flow valve which may be located on the side of the house under a big plastic fake rock.

Many sprinkler systems in Oklahoma have them. (50 % ?)  Under the plastic rock is a back-flow valve with two shut off handles.  Usually, they have blue or green or tan handles.  Turn one of the handles and it should shut off the water to your sprinkler system.

Other times the Emergency Shutoff Valve is in a box in the ground out by the curb near your water meter.  The valve box will have a green lid.  Sometimes they are difficult to open.  Many times, I had to pry them open with a flat head screwdriver.

 

Inside the valve box is a plastic handle that can turn off the water to the sprinkler system.  It can be blue or red or grey in color.

Many times, the valve box will be full of dirt, and you can’t turn or even see the handle until some of the dirt has been dug out by hand.

 

Water might be shooting up in the air somewhere on your property.  This can be caused by a broken sprinkler pipe or sprinkler valve.

SHUT OFF THE SPRINKLER WATER IF YOU CAN AND GIVE US A CALL.

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR. SERVICING ALL OF CENTRAL AND WESTERN OKLAHOMA.

405 203 9419

Servicing Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma

Sprinkler Controller Repair is a service provided by Oklahoma Drainage.  A Sprinkler Controller is the “Brain,” of a Sprinkler System.  They can wear out or stop working.  Power surges in the home can cause damage to a controller.

Comments
  1. […] French Drain Design Steps, Norman, Oklahoma City, Edmond, Moore […]

Leave a Reply