Archive for the ‘French Drain Photos’ Category

 

French Drain Edmond Oklahoma

Recently Oklahoma Drainage installed a 6-inch French Drain for a customer in East Edmond.  She had water coming down the hill in her back yard, on to her patio, and into her back door. 

Also, there was water standing on the side of her house.  Water was standing near the AC unit.  Water was standing by the South side garage door too. We installed a 6-inch French Drain all the way around the house with 2 curb outlets, One on the North Side of the driveway, and one on the South.

 

Completed Decorative French Drain

Completed Decorative French Drain

We also connected 4 Gutter Down Spouts directly into the French Drain which made the Drainage System more efficient and caused suction in the French drain improving performance and preventing Vapor Lock during Flooding Situations.

Connecting Gutter to french Drain

Connecting Gutter to French Drain

This Design Solved all their water problems and was tested with a heavy rain the day after work was completed.

What Size French Drainpipe is Available

When installing a Drainage System of any type, a decision must be made on the size of Drainpipe used.  Typically 6 inch, 4 inch, and 3 inch are the most common in Residential Drainage Systems.   If you have one or two 6 inch Surface Drains or a stretch of French Drain that is less than 10 feet, then a 3 inch drain pipe can be used.   Three inch drain pipe is used for low volume applications.

4 inch and 6 inch

4 inch and 6-inch Drainpipe

  French Drain Repair and Installation is a Central Focus for Oklahoma Drainage.  We installed our first French Drain and completed our first Sprinkler Repair in Norman in 1993.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

Flooded Area

Flooded Area

A Channel Drain Across the, soon to be installed driveway would be a good idea too!

channel drain driveway

Channel Drain set in Driveway

FRENCH DRAIN CONNECTED TO GUTTERS

Drainage System

  Many different types of Drains can be hooked together by one Drainpipe.  The Drainpipe then running to an Exit Point makes up a Drainage System. One common type of Drain used in a Drainage System is A “French Drain.”  Many times, a French Drain is installed close to a building foundation or in a low area next to a home or business.  This puts the French Drain in close proximity to Gutter Down Spouts. Rather than have water come off the roof and out the Down Spout and on to the ground below, It is better to tie a Gutter Down Spout Directly into a French Drain. Connecting The Down Spouts Directly into a French Drain is much more efficient and causes suction to occur in the French Drain.  Connection of Gutter Down Spouts to a French Drain makes the Drainage System work better.

Gutter connected to Drainage system

Gutter Connected to Drainage System

French Drains Can

 

1.  Keep water away from foundations —

A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving underground) away from the foundation.  Many times, less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.

Surface Drains Can’t Remove Ground Water

A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.     If, “appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be. One side of a foundation alone, can be over 100 feet.  A 4 inch or 6-inch French Drain is best when protecting a large area such as a foundation.  

Surface Drains Work Well in Smaller Areas

Keep water away from small or enclosed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house or standing water on or near a sidewalk or driveway. These types of Drainage Problems are best served with Surface Drains.  A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways. A Surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point. Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the Drainpipe that is connected to the Drain.
Surface Drain Installation in Norman

French Drain Installation in Oklahoma City, Norman, Yukon, Mustang, Edmond, Lawton

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

 

French Drain Installation, Oklahoma City, Duncan, Blanchard, New Castle, El Reno, Yukon, Mustang

Oklahoma Drainage – We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water damaging your foundation, We can install a French Drain for you.

If you live in Norman and have water standing on your driveway, We can install a Channel Drain for you.

If you live in Edmond and have water flooding your basement, We can install a Sump Pump for you.

If you live in Moore and have water washing out your flower bed mulch, We can install a Surface Drain for you.

If you live in Yukon and need grass to grow we can install Sod too!

Servicing all of Central and Western Oklahoma since 1993.

When Installing a French Drain as part of a Drainage System, there are many things to consider. What is the primary source of water coming into the problem drainage area. Are there secondary sources of water entering the area. What are they and how many. How fast does water enter the area and how often. What are the potential exit points for the water,  Where do we want to take the water too.  Is there more than one potential exit point to increase drainage capacity. Does the customer want a Drainage System or a Flood Prevention System and does he understand the difference.

New French Drain

French Drain along stem wall.

 

new curb outlet

Curb outlet with more than 6 inches of fall

Oklahoma Drainage 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

 

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, with 30 years of experience. 

French Drain walkway

French Drain Installation under walkway

 

walk way french drain

Completed French Drain under walkway

Just what is a “French Drain?” Many times, people incorrectly use the phrase, “French Drain,” when they mean “Surface Drain” or “Channel Drain.”

A basic French Drain

consists of a Perforated Drainpipe  in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drainpipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drainpipe. The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The limestone or gravel is placed in the trench on top of the perforated Drainpipe and filled all the way to the surface (ground level).

 

Oklahoma Drainage recently diagnosed a Drainage Problem in South Oklahoma City.  The Homeowner had a Deep French Drain down along the Stem wall of the house.  The French Drainpipe was cheap and had collapsed.  We brought in a Mini Excavator.  

 They had a Sump Pump

in their basement that was fed from a French Drain outside the Basement Wall.  The French Drain was 14 feet down.  We used and Excavator and dug up the pipe and replaced it with Durable ADS 4 inch perf/soc French Drainpipe.  In the end, we were able to dig up the pipe and replace it.

Connecting Gutter into French Drain

New Trench for French Drain

Next, we installed a new exit for the water by installing a curb fitting. No more flooding in the customers basement.  A few weeks later our customer was able to lay carpet in the basement with no problems.

French Drain Installed Along Stem Wall

Oklahoma Drainage — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

 

Servicing all of Central and Western Oklahoma since 1993.

French Drain Installation

Oklahoma Drainage has been diagnosing and solving Drainage Problems since 1993. As a result, we have gained a tremendous amount of experience.

Water has the ability to get into places around your home where you really don’t want it to be. This is never a good thing! Some drainage problems are easy to solve.  Typically, water enters the problem drainage area one way from one source. The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

Think About

You have to think about all the possible ways water can get into the problem area.  Sometimes it is obvious.  Sometimes its hard to determine all the possible water sources.

French Drain walk way

French Drain Installed along and under walkway to pool.

A drainage system is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away and everything looks great.  The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area. The primary water source was solved, ( The surface water run off ) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.  A surface drain can’t drain “ground water.”  A French Drain should have initially been installed instead of a Surface Drain.  A French Drain can drain both Surface Water and Ground Water.  

A French Drain Can Handle Standing Water

  Oklahoma Drainage Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Now we are expanding our service area to include

: Lawton, Altus, Duncan, Chickasha, Elk City, and all of Western Oklahoma.

    Drainage System Installation in Norman

French Drain Pictures can be important.  If you have hired a contractor to install a French Drain, you should have some idea of what it should look like.

First, the trench must be dug for the French Drain.  The French Drain trench can be across dirt or gravel.

Digging a Trench For a French Drain

Digging a trench for a French Drain

To Begin

Digging the French Drain trench is the first step.

<yoastmark class=

Semi-Permeable Material

Next the Trench Liner needs to be installed.  The Liner is a semi-permeable filter that keeps the dirt out of the French Drainpipe, but lets the water in the Drain Pipe.

French Drain Installation Next to Wall

French Drain Installation Next to Wall, Installing Trench Liner

Fill With Gravel

Gravel or crushed Limestone is placed on top of the French Drainpipe but still inside the trench liner.

Installing 4 Inch French Drain with trench Liner and pipe filter

The White Material is the Trench Liner. The black material is the Pipe Filter.

WHERE WE HAVE WORKED!

In 1993 we had no website.  I stuck little signs on the side of the road as advertisement.  I got my first Drain Installation work in March of 1993 in Norman.  It was in Brookhaven North of Robinson Street on the West side of I 35.

Over the years Oklahoma Drainage and Sprinkler Repair has installed all types of Drainage Systems in almost Every town in Central and Western Oklahoma.

The majority of our customers live in Oklahoma City, Norman, Edmond, Yukon, Mustang, Moore, Midwest City, Del City, Blanchard, New Castle, Yukon and Choctaw.

Oklahoma Drainage and Sprinkler Repair hasn’t been limited to those areas, however.  We have also installed French Drains, Surface Drains, Channel Drains, and Sump Pumps in many other cities.

Working Drainage Systems Installed by Oklahoma Drainage also reside in: Lawton, Duncan, Ardmore, Chickasha, Shawnee, Enid, Weatherford, Elk City, El reno and many other places.

If you live in any of these Cities or towns, we have installed a French Drain, Surface Drain, Channel Drain, or Sump Pump within 5 miles of your home.

Here is a description of other recent work.

A little bit North of Downtown Oklahoma City, Oklahoma Drainage installed a 6-inch French Drain between two businesses which were less than three feet apart.  The French Drain went between a Law Firm and a Tire shop.  Water was leaking through the walls of both businesses.  Gutters between the two establishments were dumping a huge amount of water.  We installed a 6-inch French Drain between the gutters.

It took a long time to get the dirt out of the trench for the French Drain.  It was a very tight fit.  We had to use a little red wagon to haul out the dirt for the French Drain and haul back in the crushed limestone for the French Drain.  It looked a little silly, but it was the only thing we could find that was narrow enough to fit between the buildings.  A French Drain that normally would take 1 day to install took three.

Back Yard French Drain

Back Yard French Drain

French Drain Near Driveway

French Drain Protecting Driveway

 

Installing Decorative French Drain In Norman Oklahoma

Installing Decorative French Drain the Right Way

Decorative stone can be placed on top of any French Drain.

Completed Decorative French Drain

Completed Decorative French Drain

Don’t Put Dirt on Top of the French Drain

You don’t want to put dirt on top of an “Open” French Drain.  This will prevent surface water or standing water from going into the French Drain.  You can however allow grass to grow over a French Drain on its own by putting out “runners.”  The grass will grow over the gravel or limestone on its own.  It will produce a “Thatch Filter.”  This is a good thing.  Standing water will disappear into the grass.  It helps keep dirt out of the drain too!

french drain

Grass growing over a French Drain

Oklahoma Drainage

provides top quality Sprinkler Repair Service.  If you live in Oklahoma City and need a Sprinkler Head moved, we can help.  You might have a Sprinkler Pipe leak that needs attention.  A Sprinkler Valve might we wore out as well.  You might just want a Sprinkler System Checkup for Spring.  For these problems and many others, Oklahoma Drainage can help.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

We service Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma.

Emergency Sprinkler Repair

Sometimes things go wrong with sprinkler systems.

 

IF YOU NEED HELP IN THE MIDDLE OF THE NIGHT OR ON A WEEKEND WITH YOUR SPRINKLER SYSTEM, GIVE US A CALL.

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR.  405 203 9419

IT MAY TAKE A FEW HOURS FOR US TO GET THERE BUT WE WILL COME TO HELP.

 

One Common problem is that they continue to run and won’t shut off.  In most cases this is a problem with a sprinkler valve that has “Stuck” in the on position.

This can be temporarily solved by shutting of the Emergency Shutoff Valve.  The problem is that some sprinkler systems don’t have one to turn off or if they do the homeowner doesn’t know where it is.

It may be on the back-flow valve which may be located on the side of the house under a big plastic fake rock.

Many sprinkler systems in Oklahoma have them. (50 % ?)  Under the plastic rock is a back-flow valve with two shut off handles.  Usually, they have blue or green or tan handles.  Turn one of the handles and it should shut off the water to your sprinkler system.

Other times the Emergency Shutoff Valve is in a box in the ground out by the curb near your water meter.  The valve box will have a green lid.  Sometimes they are difficult to open.  Many times, I had to pry them open with a flat head screwdriver.

 

Inside the valve box is a plastic handle that can turn off the water to the sprinkler system.  It can be blue or red or grey in color.

Many times, the valve box will be full of dirt, and you can’t turn or even see the handle until some of the dirt has been dug out by hand.

 

Water might be shooting up in the air somewhere on your property.  This can be caused by a broken sprinkler pipe or sprinkler valve.

SHUT OFF THE SPRINKLER WATER IF YOU CAN AND GIVE US A CALL.

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR. SERVICING ALL OF CENTRAL AND WESTERN OKLAHOMA.

405 203 9419

Servicing Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma

 

Edmond Oklahoma French Drain Installation is a Central Focus for Oklahoma Drainage.

405 203 9419  Call or Text

Since 1993 Oklahoma Drainage has installed over 1200 drains in the city limits of Edmond Oklahoma. 

We service all of Central and Western Oklahoma. 

Sprinkler Repair is also available as well as Channel Drain, Surface Drain and Sump Pump Installation.  We Even Install Sod.  

People think, “I need a French Drain along my driveway.”  Or they think, ” I need a Channel Drain set in my patio.”  There are lots of different drains to fill lots of different needs.

Channel Drain Installation

channel drain installation

Patio Channel Drain Installation

Ducks In the French Drain

I should hire these guys to test French Drains.

A Drain however is only the “Intake” part of a Drainage System.  There is also the ” Transition.”  This takes the water where you want it to go once inside the Drainage System.  There is also the “Exit.”  This is the place where water leaves the Drainage System. A Drainage System can be complex or simple.  A complex Drainage System may utilize many types of Drains with Several Different Transitions.

 

Check Out Our Drain Photo Library

Complex Drainage System

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

 Simple Drainage

might be one drain connected to one drainpipe running to one Exit. A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

surface drain installation

Surface Drain installed in Flag Stone.

“Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem. In Review, there are Simple and Complex Drainage Systems according to design. There are also 2 Categories of Drainage Systems based on Performance.

  1. Standard Drainage Systems
  2. Flood Prevention Systems

A Standard Drainage System is a System that Drains away water after it enters the Problem Drainage Area. Once in the area the water is drained away over time. The better the Drainage System, the faster and more completely the water is removed.

Flood Prevention System

 Flood Prevention Systems are a Drainage Systems that intercepts water before it ever enters the Problem Drainage Area. They are typically more robust.  Flood Prevention Systems must have larger pipes or more pipes to handle extreme flooding.

Standing Water

Standing Water Needs a French Drain

Where They Fail

There may be situations where Drainage Systems or Flood Prevention Systems fail due to extreme flooding. A flood may put the Exit point of the Drainage System under water.  If your entire property is under water, nothing will drain until the flood goes away.

With that being said, Your Drainage System may be in a location that it is impossible to flood or very unlikely. So, Step one is to decide,” Do I want a Standard Drainage System? OR Do I want a Flood Prevention System?”

Note!

Flood Prevention Systems are more costly and take longer to install than Drainage Systems.

Oklahoma Drainage provides top quality Sprinkler Repair Service. 

If you live in Oklahoma City and need a Sprinkler Head moved, we can help. 

You might have a Sprinkler Pipe leak that needs attention. 

A Sprinkler Valve might we wore out as well.   A Sprinkler System Checkup for Spring may be needed. 

For these problems and many others, Oklahoma Drainage can help. We service Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma.

Oklahoma Drainage 405 203-9419

Edmond Oklahoma French Drain Installation is a Central Focus for Oklahoma Drainage.

Some Simple rules about French Drains and Surface Drains.

A French Drain should be installed when there is a large volume of water to be drained over a large area.  Surface Drains are needed when the water volume is smaller, and the Drainage Area is small and focused.  French Drains move away Surface Water and Sub-Surface water.  Surface Drains move only surface water.

 

 

French Drain Placed Under River Rock

French Drain Placed Under River Rock

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

A Trench Liner is a semi-permeable fabric that lets water pass through it into the French Drain.

It is placed in the empty French Drain Trench before the French Drainpipe or Gravel are installed.

The Trench Liner’s purpose is to Maintain the integrity and functionality of the French Drain without allowing Debris to enter or clog the Perforated Pipe.

Debris typically is Mulch or Grass Clippings.  It can even be sand or dirt.

Installing a Trench Liner is the Key to ensuring that the French Drain will work correctly for a long time.  I have installed French Drains in 1993 that still work.

The white fabric in the picture above is the Trench Liner.  The black fabric around the pipe is the Pipe Filter.  They work together to make the French Drain last.

Many “Weekend Warriors,” or Landscape Companies that don’t specialize in French Drain Installation, skip installing Trench Liner and Pipe Filter.   It may save a small amount of time or money.

Big mistake!

In a short amount of time the French Drain will clog up and quit working.

Perforated French Drainpipe with Soc

Perforated French Drainpipe with Pipe Filter

What is the point of installing a French Drain if it won’t last very long?

A French Drain is one part of a Drainage System.

Drainage Systems have three parts, an “INTAKE,’ A “TRANSITION,” and an “EXIT.”

A French Drain takes water in through a perforated pipe.  This is the, “Intake,” portion mentioned above.  The French Drain is how the water gets into the Drainage System.

The Perforated Pipe is placed at the bottom of the Drainage Trench.

To Review, A French Drain’s Job is to put water into the Drainage System

 

 

A Gutter Connection to French Drain.  Oklahoma Drainage Recommends connection of Gutter Downspouts to French Drains where possible.

Water coming from the Gutter Downspout is moving faster than the water already in the French Drain.  It causes suction in the French Drain Behind the Gutter.  The additional suction causes the French Drain to work even better than normal, moving more water faster.  This is called the ” Bernoulli Principle.”

Sometimes customers can hear the suction sound from the French Drain when it is raining. 

Connecting Gutter Downspouts to a French Drain is always a good Idea where performance is concerned.  

Water flows faster through the drain and takes water in faster too!

 

Oklahoma Drainage

provides top quality Sprinkler Repair Service.  If you live in Oklahoma City and need a Sprinkler Head moved, we can help.  You might have a Sprinkler Pipe leak that needs attention.  An Old Sprinkler Valve can cause problems.  You might just want a Sprinkler System Checkup for Spring.  For these problems and many others, Oklahoma Drainage can help. We service Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma.

 

Sometimes things go wrong with sprinkler systems.

 

 

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR.  405 203 9419

 

One Common problem is that they continue to run and won’t shut off.  In most cases this is a problem with a sprinkler valve that has “Stuck” in the on position.

This can be temporarily solved by shutting of the Emergency Shutoff Valve.  The problem is that some sprinkler systems don’t have one to turn off or if they do the homeowner doesn’t know where it is.

 

It may be on the back-flow valve which may be located on the side of the house under a big plastic fake rock.

Many sprinkler systems

in Oklahoma have them. (50 % ?)  Under the plastic rock is a back-flow valve with two shut off handles.  Usually, they have blue or green or tan handles.  Turn one of the handles and it should shut off the water to your sprinkler system.

Other times the Emergency Shutoff Valve is in a box in the ground out by the curb near your water meter.  The valve box will have a green lid.  Sometimes they are difficult to open.  Many times, I had to pry them open with a flat head screwdriver.

 

Inside the valve box is a plastic handle that can turn off the water to the sprinkler system.  It can be blue or red or grey in color.

Many times, the valve box will be full of dirt, and you can’t turn or even see the handle until some of the dirt has been dug out by hand.

 

Water might be shooting up in the air somewhere on your property.  This can be caused by a broken sprinkler pipe or sprinkler valve.

SHUT OFF THE SPRINKLER WATER IF YOU CAN AND GIVE US A CALL.

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR. SERVICING ALL OF CENTRAL AND WESTERN OKLAHOMA.

405 203 9419

Servicing Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma

 

 

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out. Thousands of Sprinkler Heads have been adjusted. Countless Sprinkler Controllers have been Reprogramed or Replaced. We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many. I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provide Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang. 

Recently in Edmond

Edmond Oklahoma has been the location for many French Drain Installations for Oklahoma Drainage in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water.   

The First step was to take out part of the deck along the wall.  Next, we took out the Surface Drain and the Three-Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, “Fall” to make sure the water would run from left to right. 

 
French Drain Installation Next to Wall

French Drain Installation Next to Wall, Installing Trench Liner

 Next a French Drain Liner needed to be installed.  This was necessary to maintain the integrity of the trench and to keep the French Drainpipe from filling up with sand and getting clogged over the next few years.  We then installed 4 inch ADS Perf/Soc French Drainpipe along the course of the French Drain.  Next, we connected the end of the French Drainpipe to Solid 4 Inch ADS Drainpipe to continue along the trench to the Pop-Up Emitter at the Exit Point.

Structural Engineer  

Oklahoma Drainage installed a 4-inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advice.   The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, “he had recommended French Drain Installation to solve similar problems for homeowners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.  

Norman Oklahoma French Drain Installation,

Water in Floor Vents and Duct Work.

Recently we installed a 4-inch French Drain with Trench Liner and Pipe Filter In West Norman on Harrogate Street.  Our customer had a heavy water build up area on the side of her house.  Water would pool up during a rain and sink down into her flower bed.  Once the slab and foundation of the house got very wet, the water would seep into the floor ducts for their Central Heat and Air unit.  This is bad for several reasons. A wet foundation causes deterioration of the cement.  Cracks can occur leading to all sorts of other problems. Water In your floor vents promotes mold and all the problems that come with that as well.

Below is a French Drain with a Trench Liner and Pipe Filter

 

french drain installation

French Drain in Edmond

Oklahoma Drainage Installed 4 Inch French Drain with trench liner and pipe filter about one foot away from the wall where all the water was standing and penetrating the Duct Work.   

The French Drain ran parallel to the house for 60 Feet.  At that point the French Drain transitioned to 4 Inch solid ADS Drainpipe and continued South an additional 80 feet to a Curb Outlet installed at the street.

We cut the curb

and installed a Curb Outlet with Acrylic Concrete to make it look nice and last without chipping. Along the course of the French Drain, we also connected 2 Gutter Down Spouts Directly into the French Drain.

This provides more efficient movement of the storm water to the exit but also creates suction in the French Drain behind it. This is called the “Bernoulli Effect.” If you remember your High School Science Class.  

Oklahoma Drainage has used these simple concepts many times to provide a solution to the above problem. Water still had to be vacuumed out of the Duct Work.  But Future water was and is kept out of the Duct Work and Floor Vents.  Also, the Foundation Stays Dry.  No mold or foundation Break Down.

Oklahoma Drainage – We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water is damaging your foundation, we can install a French Drain for you.

Water may be standing on your driveway.   Channel Drain Installation is a Solution.

If you live in Edmond and have water flooding your basement, we can install a Sump Pump for you.

 Flooding in your flowerbed can be solved with a Surface Drain.

If you live in Yukon and need grass to grow, we can install Sod too!

Check Out Parts of a French Drain

 

 

 

 

  A French Drain is completely different from a Surface Drain.   French Drains consists of a Perforated Drainpipe in the bottom of a trench.  A Trench Liner should be used to keep the gravel clean. The Drainpipe should have a neoprene sock around the Perforated Drainpipe.   This is to ensure that the Drainpipe does not become clogged. A trench is dug that is wider than the French Drainpipe that is being used.  This gives room for the gravel or crushed limestone to be used to fill the trench on top of the French Drainpipe.

Drainpipe Sizes

There are several sizes of French Drainpipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drainpipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch limestone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.

The limestone or gravel is placed in the trench on top of the perforated Drainpipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drainpipe, or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.

 

 

Think about this! French Drain Design must take into account many variables.  You should consider your type of soil before installing a  French Drain.

  It will dictate how hard the digging will be.

  A Trench Liner should be used to prevent soil from moving into the gravel of the French Drain.  Trench Liners are relatively inexpensive and are not hard to install.   Install the Trench Liner in the French Drain During Installation. 

Installation of a French Drain in Edmond Oklahoma

Installation of a French Drain in Edmond Oklahoma

Drainage Systems are made up of one drain or a combination of many drains.  Drainage problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

 

Channel Drain Installation Is a Central Focus for Oklahoma Drainage.  We have been Installing Channel Drains set in Concrete since 1993.

Channel Drain Set in Concrete

Channel Drains can look great and be very functional and durable.

However, A Channel Drain is not an easy thing to install!  It takes a great deal of precision, Experience, and Attention to Detail.  This is Definitely Not something to allow your Landscape Company to attempt, or your Brother-In-Law!

Just because someone is skilled at pushing a mower around, doesn’t mean you should let them cut across your driveway with a concrete saw.

I get a lot of business fixing and replacing Drains of all types that were installed incorrectly by landscape companies and armatures.  Typically, they stick to messing up French Drains, but I have fixed Channel Drains that were an absolute “Train Wreck!” as well.

 

Oklahoma Drainage 405 203 9419

French Drain Installation, Channel Drain Installation Surface Drain Installation, Drainage System Installation, 

 

 

WHERE WE HAVE WORKED!

In 1993 we had no website.  I stuck little signs on the side of the road as advertisement.  I got my first Drain Installation work in March of 1993 in Norman.  It was in Brookhaven North of Robinson Street on the West side of I 35.

Over the years Oklahoma Drainage and Sprinkler Repair has installed all types of Drainage Systems in almost Every town in Central and Western Oklahoma.

The majority of our customers live in Oklahoma City, Norman, Edmond, Yukon, Mustang, Moore, Midwest City, Del City, Blanchard, New Castle, Yukon and Choctaw.

Oklahoma Drainage and Sprinkler Repair hasn’t been limited to those areas, however.  We have also installed French Drains, Surface Drains, Channel Drains, and Sump Pumps in many other cities.

Working Drainage Systems Installed by Oklahoma Drainage also reside in: Lawton, Duncan, Ardmore, Chickasha, Shawnee, Enid, Weatherford, Elk City, El reno and many other places.

If you live in any of these Cities or towns, we have installed a French Drain, Surface Drain, Channel Drain, or Sump Pump within 5 miles of your home.

Trench Liner and Pipe Filter Installed on French Drain

Trench Liner and Pipe Filter Installed with French Drain

Here is a description of other recent work.

A little bit North of Downtown Oklahoma City, Oklahoma Drainage installed a 6-inch French Drain between two businesses which were less than three feet apart.  The French Drain went between a Law Firm and a Tire shop.  Water was leaking through the walls of both businesses.  Gutters between the two establishments were dumping a huge amount of water.  We installed a 6-inch French Drain between the gutters.

It took a long time to get the dirt out of the trench for the French Drain.  It was a very tight fit.  We had to use a little red wagon to haul out the dirt for the French Drain and haul back in the crushed limestone for the French Drain.  It looked a little silly, but it was the only thing we could find that was narrow enough to fit between the buildings.  A French Drain that normally would take 1 day to install took three.

Sprinkler Repair

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Emergency Sprinkler Repair

Sometimes things go wrong with sprinkler systems.

 

IF YOU NEED HELP IN THE MIDDLE OF THE NIGHT OR ON A WEEKEND WITH YOUR SPRINKLER SYSTEM, GIVE US A CALL.

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR.  405 203 9419

IT MAY TAKE A FEW HOURS FOR US TO GET THERE BUT WE WILL COME TO HELP.

 

One Common problem is that they continue to run and won’t shut off.  In most cases this is a problem with a sprinkler valve that has “Stuck” in the on position.

This can be temporarily solved by shutting of the Emergency Shutoff Valve.  The problem is that some sprinkler systems don’t have one to turn off or if they do the homeowner doesn’t know where it is.

It may be on the back-flow valve which may be located on the side of the house under a big plastic fake rock.

Many sprinkler systems in Oklahoma have them. (50 % ?)  Under the plastic rock is a back-flow valve with two shut off handles.  Usually, they have blue or green or tan handles.  Turn one of the handles and it should shut off the water to your sprinkler system.

Other times the Emergency Shutoff Valve is in a box in the ground out by the curb near your water meter.  The valve box will have a green lid.  Sometimes they are difficult to open.  Many times, I had to pry them open with a flat head screwdriver.

 

Inside the valve box is a plastic handle that can turn off the water to the sprinkler system.  It can be blue or red or grey in color.

Many times, the valve box will be full of dirt, and you can’t turn or even see the handle until some of the dirt has been dug out by hand.

 

Water might be shooting up in the air somewhere on your property.  This can be caused by a broken sprinkler pipe or sprinkler valve.

SHUT OFF THE SPRINKLER WATER IF YOU CAN AND GIVE US A CALL.

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR. SERVICING ALL OF CENTRAL AND WESTERN OKLAHOMA.

405 203 9419

Servicing Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma

 

French Drain Design must take into account many variables.  One consideration for a French Drain is Soil Type.  French Drain Design must take into account the type of soil that the French Drain runs through.  If the soil is “Tight or made up of Clay, A French Drain Liner may not be necessary.

When a French Drain, Is Installed in sandy soil, A Trench Liner is always needed.  As a result the French Drain Gravel stays clean.

The Gravel or Limestone that is used to fill the French Drain trench may be all that is needed to maintain the integrity of the trench over time.   This means that dirt will not mix in with the French Drain Gravel and clog it up over time.  This is not the case however if your soil is sandy or loose.

A Trench Liner should be used to prevent this type of soil from moving into the gravel of the French Drain.  Trench Liners are relatively inexpensive and are not hard to install.  If you are not sure what to do then install the Trench Liner in the French Drain.

Norman Oklahoma French Drain Installation, Water in Floor Vents and Duct Work.

Recently we installed a 4-inch French Drain with Trench Liner and Pipe Filter in West Norman on Harrogate Street.  Our customer had a heavy water build up area on the side of her house.  Water would pool up during a rain and sink down into her flower bed.  Once the slab and foundation of the house got very wet, the water would seep into the floor ducts for their Central Heat and Air unit.  This is bad for several reasons.

A wet foundation causes deterioration of the cement.  Cracks can occur leading to all sorts of other problems.

Water In your floor vents promotes mold and all the problems that come with that as well.

Oklahoma Drainage Installed 4 Inch French Drain with trench liner and pipe filter about one foot away from the wall where all the water was standing and penetrating the Duct Work.   The French Drain ran parallel to the house for 60 Feet.  At that point the French Drain transitioned to 4 Inch solid ADS Drain Pipe and continued South an additional 80 feet to a Curb Outlet installed at the street.

Curb Outlet

We cut the curb and installed a Curb Outlet With Acrylic Concrete to make it look nice and last without chipping.

Along the course of the French Drain, we also connected 2 Gutter Down Spouts Directly into the French Drain..

This provides more efficient movement of the storm water to the exit, but also creates suction in the French Drain behind it.

This is called the “Bernoulli Effect.” If you remember your High School Science Class.

 

Oklahoma Drainage has used these simple concepts many times to provide a solution to the above problem.

Water still had to be vacuumed out of the Duct Work.  But Future water was and is kept out of the Duct Work and Floor Vents.  Also, the Foundation Stays Dry.  No mold or foundation Break Down.

 

Trench Liner and Pipe Filter

Trench Liner and Pipe Filter

Determining the size of the French Drain Pipe can be difficult.  If the French Drain is not very big and has no Gutter Down-Spouts or Surface Drains connected to it then 3 inch or 4 inch French Drain Pipe may be used.  If the French Drain is large or has many gutters or Surface Drains connected into it, then you should use 6 Inch French Drain Pipe or larger.

French Drain for Flood Control.  Sometimes French Drains are installed to control flooding.  Many times, areas can flood that have drains already installed.  As a general rule, a French Drain can take water into the drainpipe faster than a Surface Drain if installed correctly.

French Drain

Oklahoma Drainage  — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

If you have water causing damage to your home or business, we can help!  Oklahoma Drainage has been solving drainage and water problems since 1993.  If you have water standing in your yard or it’s leaking into your AC ducts, we can help.

 

Servicing all of Central and Western Oklahoma since 1993.

French Drain Installation

Oklahoma Drainage and Sprinkler Repair has been diagnosing and solving Drainage Problems since 1993.  Water has the ability to get into places around your home where you really don’t want it to be.  Some drainage problems are easy to solve.

Typically, water enters the problem drainage area one way from one source.  The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

An example of this occurs when water is running into a problem area, in an obvious way, over the ground where you can see it.

Simple enough.

A drainage system is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away and everything looks great.  The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area.  The primary water source was solved, ( The surface water run off ) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.

Surface Drain Limitations

A surface drain can’t drain “ground water.”  A French Drain should have initially been installed instead of a Surface Drain.  A French Drain can drain both Surface Water and Ground Water All Drainage Systems and French Drains as well need a place to take the water to.  This is called an Exit Point.  We use two types of Exits.  The first is a curb outlet.  We cut the curb with a concrete saw and install a rectangular curb outlet set in acrylic concrete.

new curb outlet

Curb outlet with more than 6 inches of fall

A rectangular outlet is superior to a round one.  Air travels back up the pipe through the top two corners to allow a more continuous water flow.  If you have ever poured liquid out of a 2 liter bottle turning it completely upside down, you will see that it drains but not very well.

decorative french drain

Decorative French Drain Running Across a Flower Bed

Oklahoma Drainage installs a variety of other types of Drains.  Our Drainage Systems may utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, Basin Drains, and Sump Pumps.  In the past 31 years, we have installed French Drains to keep water away from home and business foundations,

Surface Drains to keep water away from sidewalks and driveways, Trench Drains, and French Drains to keep standing water out of flowerbeds and yards, and Sump Pumps to remove water from basements and outdoor low-lying areas.

Drainage Problems

Wow, Some Drainage Problems are tougher than others.  Had a customer in Chickasha with an unusual Drainage Problem.  She had a new Driveway installed.  The Cement work was nice enough but they left out one major consideration when installing the new Driveway.  Even after a small rain the water would run right down the driveway, under the Garage Door and directly into the Garage.

Church drain dig

Digging a Large Drainage System for a Church

This was a bad problem that was about to get worse.  The first big rain came and everything was magnified.  The Rushing water took out the garage door and the back wall of the garage.  Yikes!!

Hmm, What to do?  The company that installed the Driveway was nowhere to be found.  No surprise.

The water volume was huge, and the customer had no means to redo the driveway which was substantial.

WHERE WE HAVE WORKED!

In 1993 we had no website.  I stuck little signs on the side of the road as advertisement.  I got my first Drain Installation work in March of 1993 in Norman.  It was in Brookhaven North of Robinson Street on the West side of I 35.

Over the years Oklahoma Drainage and Sprinkler Repair has installed all types of Drainage Systems in almost Every town in Central and Western Oklahoma.

The majority of our customers live in Oklahoma City, Norman, Edmond, Yukon, Mustang, Moore, Midwest City, Del City, Blanchard, New Castle, Yukon and Choctaw.

Oklahoma Drainage and Sprinkler Repair hasn’t been limited to those areas, however.  We have also installed French Drains, Surface Drains, Channel Drains, and Sump Pumps in many other cities.

Working Drainage Systems Installed by Oklahoma Drainage also reside in: Lawton, Duncan, Ardmore, Chickasha, Shawnee, Enid, Weatherford, Elk City, El reno and many other places.

If you live in any of these Cities or towns, we have installed a French Drain, Surface Drain, Channel Drain, or Sump Pump within 5 miles of your home.

Here is a description of other recent work.

A little bit North of Downtown Oklahoma City, Oklahoma Drainage installed a 6-inch French Drain between two businesses which were less than three feet apart.  The French Drain went between a Law Firm and a Tire shop.  Water was leaking through the walls of both businesses.  Gutters between the two establishments were dumping a huge amount of water.  We installed a 6-inch French Drain between the gutters.

It took a long time to get the dirt out of the trench for the French Drain.  It was a very tight fit.  We had to use a little red wagon to haul out the dirt for the French Drain and haul back in the crushed limestone for the French Drain.  It looked a little silly, but it was the only thing we could find that was narrow enough to fit between the buildings.  A French Drain that normally would take 1 day to install took three.

Sprinkler Repair Facts

 

Oklahoma Drainage and Sprinkler Repair provides Expert Service for Sprinkler Heads, Valves, Controllers and all other Sprinkler System difficulties.  We service Norman, Edmond, Oklahoma City, Moore, Yukon, Mustang, and Midwest City.

Emergency Sprinkler Repair

Sometimes things go wrong with sprinkler systems.

 

IF YOU NEED HELP IN THE MIDDLE OF THE NIGHT OR ON A WEEKEND WITH YOUR SPRINKLER SYSTEM, GIVE US A CALL.

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR.  405 203 9419

IT MAY TAKE A FEW HOURS FOR US TO GET THERE BUT WE WILL COME TO HELP.

 

One Common problem is that they continue to run and won’t shut off.  In most cases this is a problem with a sprinkler valve that has “Stuck” in the on position.

This can be temporarily solved by shutting of the Emergency Shutoff Valve.  The problem is that some sprinkler systems don’t have one to turn off or if they do the homeowner doesn’t know where it is.

It may be on the back-flow valve which may be located on the side of the house under a big plastic fake rock.

Many sprinkler systems in Oklahoma have them. (50 % ?)  Under the plastic rock is a back-flow valve with two shut off handles.  Usually, they have blue or green or tan handles.  Turn one of the handles and it should shut off the water to your sprinkler system.

Other times the Emergency Shutoff Valve is in a box in the ground out by the curb near your water meter.  The valve box will have a green lid.  Sometimes they are difficult to open.  Many times, I had to pry them open with a flat head screwdriver.

 

Inside the valve box is a plastic handle that can turn off the water to the sprinkler system.  It can be blue or red or grey in color.

Many times, the valve box will be full of dirt, and you can’t turn or even see the handle until some of the dirt has been dug out by hand.

 

Water might be shooting up in the air somewhere on your property.  This can be caused by a broken sprinkler pipe or sprinkler valve.

SHUT OFF THE SPRINKLER WATER IF YOU CAN AND GIVE US A CALL.

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR. SERVICING ALL OF CENTRAL AND WESTERN OKLAHOMA.

405 203 9419

Servicing Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma

 

Sprinkler Controller Repair is a service provided by Oklahoma Drainage.  A Sprinkler Controller is the “Brain,” of a Sprinkler System.  They can wear out or stop working.  Power surges in the home can cause damage to a controller.

Programming can be difficult for homeowners.  We can help with programming or replace a Sprinkler Module if it is defective.

Start Time Programming

“Start Time” programing many times is confusing for homeowners.  The definition of a Start Time is a time that is chosen for the sprinkler system to start watering.  It causes zone 1 to start running.  When zone 1 is finished it automatically stops and zone 2 begins.  When Zone 2 is complete it stops and zone 3 begins.  Simple enough Right!  This continues until the last zone programed available runs.

The confusion begins when people think that a time needs to be set to start zone 2 and 3 and so on.  This is not the case.  They follow zone 1 which has the only Start Time programmed into the controller.

Be Careful with Multiple Start Times, just use One at first.

Sprinkler Controllers have a feature providing multiple start times, up to 4 Start Times are usually available.  These additional start times are only used when a person wants to run the entire system more than once in a 24-hour period.

For Example, the first Start Time is set at 9Am.  Zone 1 begins to run at 9am.  When Zone 1 is done, say 10 minutes later, Zone 2 begins and runs for 10 minutes, then zone 3 follows and so on.  By 10 am let’s say all the zones have run.  Let’s say 8 hours later you have a second start time at 6 Pm.  Zone 1 comes on and runs and by 7pm all the zones have run again.  So, the controller has 2 start times which have caused the Sprinkler System to run start to finish twice in a 24-hour period.

Here is the big problem!  Some Homeowners believe the second start time is to start zone 2 running.  They also think that the 3rd start time is to start zone 3 and the 4-start time is to run zone 4.  No!!

So, this is how they program the controller.  At 9am they have a start time and zone 1 starts.  The homeowner programs a second start time at 9:10 am to mistakenly start zone 2.  Nope!  It starts zone 1 all over again.  At 9:2o they have a 3rd start time for zone 3.  Nope!  It starts zone 1 for a third time.  Now the controller is stuck in a loop and zone 1 runs constantly and won’t shut off.

If Sprinkler Controller Programming is confusing?  Make sure you only have One Start Time!

“Run Time,” is completed Next.  It determines how long each zone runs.  Zone One 10 Minutes,     Zone Two, 15 Minutes, Zone Three 8 Minutes.  You can set how long you want each zone to run.

French Drain Repair and Installation is a Central Focus for Oklahoma Drainage.  We installed our first French Drain and completed our first Sprinkler Repair in Norman in 1993.

We started with the Valves

The Sprinkler Valves were located in the back yard near the pool.  Six valves were located in one place.  They were very tightly connected in one Manifold.  None of the Sprinkler Valves had worked in a long time.  They were Toro Valves that were over 20 years old.  They all had to be replaced.

Surprisingly there was no shut-off valve for the Sprinkler Water.  The water had to be shut off at the Meter so we could install a Manual Shut off valve.  Once installed, the water was turned back on that ran to the house.   The water that ran to the Sprinkler System was shut off with our New Shut Off Valve.

Rainbird Sprinkler Valve

Rainbird Sprinkler Valve

The Sprinkler Valves Were Removed

Now, the 6 valves had to replaced.  The valves that were used were made by Rain Bird.  Before we began, I had to talk to the Customer.  The previous valve design was a bad idea to repeat.

The original Sprinkler Valves were crammed into one large valve box in one very tight manifold.  This is bad because the valves were too close to the fittings.  Simply put, if one valve had to be replaced or worked on in the future, all 6 valves had to be taken out and replaced.   If one valve was bad and 5 worked fine, they all still had to be replaced.

That’s Stupid!

I recommended that an additional Valve Box be installed putting 3 valves in each Valve Box.  This would allow plenty of space between the valve fittings.  If one Sprinkler Valve had to be adjusted or replaced in the future, the other 5 valves need not be disturbed.  Simple Enough!

Check For Leaks

Once the valves were replaced and working, it was time to turn on each Sprinkler Zone, one at a time.  Water was shooting up from the ground in several places in zone 1.  Two broken Sprinkler Pipes and 5 bad Sprinkler Heads in zone 1 had to be fixed and replaced.  We went through each of the 6 zones in similar fashion fixing lots of leaks and replacing bad sprinkler heads.

The Sprinkler Repair Cost About Half of the Cost of Completely New System.

Rotor and Pop-Up Sprinkler Heads

Rotor and Pop-Up Sprinkler Heads

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

Sprinkler Head Adjustment is a service provided by Oklahoma Drainage and Sprinkler Repair.  We have adjusted sprinkler heads since 1993.

Many times, Sprinkler heads get, “Out of Wack.”  Lawn mowers and weed eaters are notorious for this.  Sprinkler heads start spraying water in the wrong place.  It is frustrating to water concrete while plants and grass go without moisture.

Pop-Up Sprinkler Heads

Pop-Up Sprinkler Heads can be adjusted several ways.  How far water goes to the left or right can be increased or decreased.  The distance the water goes can also be increased or decreased.  Finally, how high a sprinkler head pops up can be increased or decreased by installing a taller or shorter head.

Sometimes sprinkler heads spray a reduced distance and don’t perform very well due to water scale.  Minerals in the water can completely clog a Pop-Up.  Usually, the sprinkler nozzle on top of the sprinkler head, need only be replaced without replacing the entire head.

Rotor Sprinkler Heads also can be adjusted to the left or right.  Spray Distance can be increased or decreased as well.

Needs Change

What’s going on in your yard can change.  This calls for Sprinkler Head Adjustment.  Adding or removing a swimming pool changes everything concerning sprinkler heads.  Any number of things can change the necessary sprinkler head coverage.

 

 

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

Check out Sprinkler System Check-Up

 

Decorative French Drain and Channel Drain

Oklahoma City French Drain Installation Since 1993.

 

 

French Drain, Moore Oklahoma, Oklahoma City, Norman, Edmond, French Drain Repair

Oklahoma Drainage 405 203 9419

Check Out – Where We Have Worked

French Drain Installation

French drain Installation
with trench liner and pipe filter

Oklahoma City French Drain Installation has been a Central focus for Oklahoma Drainage since 1993.  We have served over 2000 customers.

We have installed a lot of French Drains in apartment complexes and businesses.  The majority of our business is with Homeowners.

Tell Your Friends about us!  Or just enter “OKLAHOMA CITY FRENCH DRAIN INSTALLATION,” into Google.

What is a French Drain?

Click the Link Above

1993 was a long time ago.  Oklahoma Drainage has installed French Drains, Surface Drains, Channel Drains and Sump Pumps for over 33 years.  We also provide Sprinkler Repair.  

Duck enjoying a French Drain

I should hire these guys to test French drains.

Check Out Our Drain Photo Library

Oklahoma Drainage provides top quality Sprinkler Repair Service.  If you live in Oklahoma City and need a Sprinkler Head moved, we can help.  You might have a Sprinkler Pipe leak that needs attention.  A Sprinkler Valve might we wore out as well.  You might just want a Sprinkler System Checkup for Spring.  For these problems and many others, Oklahoma Drainage can help.

We service Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma.

Emergency Sprinkler Repair

Sometimes things go wrong with sprinkler systems.

 

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR.  405 203 9419

 

One Common problem is that they continue to run and won’t shut off.  In most cases this is a problem with a sprinkler valve that has “Stuck” in the on position.

This can be temporarily solved by shutting of the Emergency Shutoff Valve.  The problem is that some sprinkler systems don’t have one to turn off or if they do the homeowner doesn’t know where it is.

Above Ground Back-Flow-Valve

Above Ground Back-Flow-Valve.

It may be on the back-flow valve which may be located on the side of the house under a big plastic fake rock.

Many sprinkler systems in Oklahoma have them. (50 % ?)  Under the plastic rock is a back-flow valve with two shut off handles.  Usually, they have blue or green or tan handles.  Turn one of the handles and it should shut off the water to your sprinkler system.

Other times the Emergency Shutoff Valve is in a box in the ground out by the curb near your water meter.  The valve box will have a green lid.  Sometimes they are difficult to open.  Many times, I had to pry them open with a flat head screwdriver.

 

Inside the valve box is a plastic handle that can turn off the water to the sprinkler system.  It can be blue or red or grey in color.

Many times, the valve box will be full of dirt, and you can’t turn or even see the handle until some of the dirt has been dug out by hand.

 

Water might be shooting up in the air somewhere on your property.  This can be caused by a broken sprinkler pipe or sprinkler valve.

SHUT OFF THE SPRINKLER WATER IF YOU CAN AND GIVE US A CALL.

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR. SERVICING ALL OF CENTRAL AND WESTERN OKLAHOMA.

405 203 9419

Servicing Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma

 

Installing 4 Inch French Drain with trench Liner and pipe filter

The White Material is the Trench Liner. The black material is the Pipe Filter.

We Install Drainage Systems to fit various needs for homeowners an businesses.  A Drainage System can utilize French Drains, Surface Drains, Channel Drains or Sump Pumps as the intake part to the Drainage System. 

The Drain or Sump Pump brings water into the Drainpipe.  The Drainpipe takes the water to the ” Exit.”  Which is Either a “Curb Outlet” or a “ Pop Up Emitter.”

The Three parts of A Drainage System are:   THE INTAKE (French Drain or Surface Drain ) etc.  The TRANSITION (The Pipe) which can be many sizes or type. The EXIT ( A Curb Outlet or Pop Up Emitter )

 

 

new curb outlet

Curb outlet with more than 6 inches of fall

 

Curb Outlets should be square or rectangular.

Round curb outlets can allow Vapor Loc when they are at capacity.  This causes the water flow to slow down as much as 30 percent.  When you need capacity the most your drainage system slows down with round outlets.  Square outlets allow air to enter the drainpipe in the top corners.  This allows water to continue to move when the pipe has reached capacity.

Need for a Drainage System

The Drainage part of our company name means that we solve water problems for people in Oklahoma.  Heavy rain is becoming more common.  Back in 1993 when I first started, a hard rain was considered to be about an Inch per/hour.  It was fairly rare but not too uncommon.  Today things are different.  A weather report of rain falls at or above 4 inches per/hour was not uncommon in 2019.  Excess water causes all types of damage to property both residential and commercial.

Our Drainage Systems drain water away from places you don’t want it to be.  You might have water standing along the foundation of your house, or inside your basement.  You might have water on your driveway or flowerbed too.

Designing a French Drain or a Drainage System

When I talk to a potential customer while doing a Drainage System estimate, I take a lot of things into consideration.  First, I have the Customer show me where water is standing or where it is going that it shouldn’t.  This is part of defining the specific problem area.

Sometimes the Water Problem Area is larger and more involved than the customer realizes.  Once the Water Problem Area is clearly defined, the next step is to determine how the water is getting to the problem area.  Many times, there is more than one Water Source to the Water Problem area.  A big mistake in Drainage System Design is to stop once the most obvious Water Source is found.

A Drainage System Designer must be a detective to some degree.  For Example:  Water running down the hill and onto the back patio might be the most obvious water source.  Sub-surface water or a neighbor’s new gutter downspout could also be contributing.  Most of the time water gets into the problem area from more than one source.

Next you must decide where to take the water.  This is determining an Exit Point for the Drainage System.  If possible, you want your exit point to be downhill from the problem area.  If it is up hill in all directions from the problem area, then the only solution is a Sump Pump.

Once an exit Point is determined,

you must ask yourself if there is any way to install two exit points.  Usually this can only work when an exit point can work on both ends of a Drainage System.  The benefit of two Exit Points in a Drainage System is it greatly increases the water capacity.  It can move much more water faster during a heavy rain than a system with just one Exit Point.  Most Drainage Systems can only utilize one Exit Point.  With 30 years of Drainage Installation, I would say 10% of our Drainage Systems have two Exit Points.

Popup Emitter to release water from a French Drain in Yukon

Popup Emitter to release water from a French Drain in Yukon

Next we have to decide what type of drain to install in the problem area.  If it is a small area with one water source, or lots of sources.

Oh! we also solve water problems and provide Drainage.

Oklahoma Drainage – We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water damaging your foundation, We can install a French Drain for you.

Or,If you live in Norman and have water standing on your driveway, consider a Channel Drain Installation.

If you live in Edmond and have water flooding your basement, a Sump Pump can help.

Or, you live in Moore and have water washing out your flower bed mulch, We can install a Surface Drain for you.

If you live in Yukon and need grass to grow, we can install Sod too!

Installing Drain Pipe from French Drain in Back Yard

Installing Drainpipe from French Drain in Back Yard

Do you have water standing in your yard after a heavy rain? 

Do your gutters turn your sidewalk into a moat after a storm.  Worst of all, do you have water seeping into your home or business from Storm-Water runoff?

 

Installing Solid 4 Inch Drain Pipe Between French Drain and Curb

Installing Solid 4 Inch Drainpipe Between French Drain and Curb

Oklahoma Drainage can help with these and many other “standing water” and ” Drainage Problems. We can diagnose your drainage problem and design a drainage system to fit your specific needs.  In Business since 1993.  

We utilize: French Drains, Surface Drains, Channel Drains, Basin Drains, Trench Drains, Basement Drains, and Sump Pumps.

 

We service all of Central and Western Oklahoma

 

 

Duck Work helping me install and test a French Drain.

It was a very hot day in Moore Oklahoma. We had finished installing a French Drain.  It ran along a stockade fence in the front yard. It turned North running under the fence into the back yard.  It ran to a pop-up emitter in the corner of the backyard.

Oklahoma Drainage runs many tests during the installation of a French Drain. The last one we do is simply putting a running garden hose at the beginning of the French Drain.  This demonstrates to the customer water flowing in the French Drain and Leaving the exit pop-up emitter.

We started the test.  Immediately a mother duck and her many babies appeared from under a nearby bush in the neighbor’s flowerbed.   They went directly to the running hose.  The party was on!

I may need to put them on the payroll.

 

Water in Floor Vents and Duct Work.

Our customer had water in his floor vents.

Recently we installed a 4-inch French Drain with Trench Liner and Pipe Filter In West Norman on Harrogate  Street.  Our customer had a heavy water build up area on the side of her house.  Water would pool up during a rain and sink down into her flower bed.  Once the slab and foundation of the house got very wet, the water would seep into the floor ducts for their Central Heat and Air unit.  This is bad for several reasons.

Wet foundation

A wet foundation causes deterioration of the cement.  Cracks can occur leading to all sorts of other problems.

Water In your floor vents promotes mold and all the problems that come with that as well.

Oklahoma Drainage Installed 4 Inch French Drain with trench liner and pipe filter about one foot away from the wall where all the water was standing and penetrating the Duct Work.   The French Drain ran parallel to the house for 60 Feet.  At that point the French Drain transitioned to 4 Inch solid ADS Drain Pipe and continued South an additional 80 feet to a Curb Outlet installed at the street.

We cut the curb and installed a Curb Outlet With Acrylic Concrete to make it look nice and last without chipping.

Along the course of the French Drain, we also connected 2 Gutter Down Spouts Directly into the French Drain..

This provides more efficient movement of the storm water to the exit, but also creates suction in the French Drain behind it.

This is called the “Bernoulli Effect.” If you remember your High School Science Class.

 

Oklahoma Drainage has used these simple concepts many times to provide a solution to the above problem.

Water still had to be vacuumed out of the Duct Work.  But Future water was and is kept out of the Duct Work and Floor Vents.  Also the Foundation Stays Dry.  No mold or foundation Break Down.

French Drain Repair and Installation is a Central Focus for Oklahoma Drainage.  We installed our first French Drain and completed our first Sprinkler Repair in Norman in 1993.

WHERE WE HAVE WORKED!

In 1993 we had no website.  I stuck little signs on the side of the road as advertisement.  I got my first Drain Installation work in March of 1993 in Norman.  It was in Brookhaven North of Robinson Street on the West side of I 35.

Over the years Oklahoma Drainage and Sprinkler Repair has installed all types of Drainage Systems in almost Every town in Central and Western Oklahoma.

The majority of our customers live in Oklahoma City, Norman, Edmond, Yukon, Mustang, Moore, Midwest City, Del City, Blanchard, New Castle, Yukon and Choctaw.

Oklahoma Drainage and Sprinkler Repair hasn’t been limited to those areas, however.  We have also installed French Drains, Surface Drains, Channel Drains, and Sump Pumps in many other cities.

Working Drainage Systems Installed by Oklahoma Drainage also reside in: Lawton, Duncan, Ardmore, Chickasha, Shawnee, Enid, Weatherford, Elk City, El reno and many other places.

If you live in any of these Cities or towns, we have installed a French Drain, Surface Drain, Channel Drain, or Sump Pump within 5 miles of your home.

Oklahoma Drainage and Sprinkler Repair

— Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

Sprinkler Valve Replacement

Edmond Sprinkler Repair

 

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

 

 

 

French Drains as part of a Drainage System – 

Many times people use the term “ French Drain” as general name for a Drain used in or around your home.  French Drains are designed to move a lot of water over a large flooded area.  They are also designed to take water in on the surface of the ground or below the surface of the ground.  This is very important if the water coming into the flooded area is moving through the ground or coming up from underneath.  ” Sub Surface Water Movement.”  The picture below is not a French Drain!

A French Drain looks like this

Installing French Drain

The White Material is the Trench Liner. The black material is the Pipe Filter.

A French Drain Can Handle Standing Water

French Drain Repair and Installation is a Central Focus for Oklahoma Drainage.  We installed our first French Drain and completed our first Sprinkler Repair in Norman in 1993.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

A French Drain can take in water in a broad area.  It can move a much larger volume of water compared to a Surface Drain.  Also, it can move sub surface water moving into the area where a Surface Drain won’t move any water at all.

Surface Drains are designed to move surface water only on a smaller scale in confined areas.

Each solves specific drainage problems.  A Drainage System may use one or both together or even several using many types of drains.

Do you have standing water in a large area in your yard?  Typically this calls for a French Drain.  A French Drain is a great way to control standing water in a large grassy area.  It can also protect areas from flooding to a certain degree.  As long as the French Drains capacity to move water is not exceeded.  If the French Drains capacity is exceeded then water will stand in the drainage area until the rain stops and the drain has time to catch up.  A good way to prevent this is to install a bigger French Drain with a larger pipe.  The difference between a 3 inch French Drain and a 6 inch French Drain is huge.

Another way to beef up a French Drain is to connect gutter down spouts in front of the French Drain.  The water coming off the roof causes suction in the French Drain Behind it.  This greatly increases the French Drains ability to move water without increasing the size of the French Drain Pipe.

Gutter Downspout Connected to 6 Inch French Drain

 

 

Oklahoma City French Drain Pictures

 

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

Installing Trench Liner for French Drain

Installing Trench Liner For French Drain

French Drains as part of a Drainage System – 

Many times people use the term ” French Drain” as general name for a Drain used in or around your home.  French Drains are designed to move a lot of water over a large, flooded area.  They are also designed to take water in on the surface of the ground or below the surface of the ground.  This is very important if the water coming into the flooded area is moving through the ground or coming up from underneath.  ” Sub Surface Water Movement.”  The picture below is not a French Drain!

 

 

 

 

 

A French Drain looks like this

Recently Oklahoma Drainage and Sprinkler Repair Installed a French Drain as part of a Drainage System in Mid West City Oklahoma.

Our customer had a back porch Sun Room.  Every time he had a hard rain, Water would run in one door and out the other.  An indoor creek across his Sun Room.

French Drain protects sidewalk
French Drain keeps water off of sidewalk

We installed a French Drain in front of the South Door.  It was 26 feet long and ran from a gutter downspout which it was connected to, in front of the South Door and along the house covering the entire “Low” Area.  Then we connected 4 inch ADS Solid Drainpipe to the French Drain and ran down hill around the corner of the house to the street.

Once the 4 inch solid drain pipe was connected to the French Drain and the two gutter down spouts, a pop-up emitter was installed to release the water at the street.

The next step was to cover the drain pipe with dirt and put the sod back in place on top of the pipe.   There was about 8 wheelbarrows of dirt left over that was displaced by the drainpipe and the French Drain.  The extra dirt was scooped up and hauled away.

While installing the drainage system, it was necessary to move two sprinkler heads that were in the way of the drainpipe installation.  This was no problem.  Installing drainage systems and French drains for folks who have a sprinkler system is very common.  Moving Sprinkler heads or pipes sometimes is necessary.  We always leave the sprinkler system in complete working order and we discuss any changes in the sprinkler system with the customer before we do it to make sure that everyone is on the same page.  In most cases the customer cant tell that we made any changes to the sprinkler system at all.

connecting gutter to French Drain
Drainage System Installation in Norman
Drainage System Installation in Norman

Harsh weather in Oklahoma seems to becoming more common.  In 2013, Norman Oklahoma had 4 inches of rain in two hours.  That’s the most rain in a short time that I can remember. 

Storm-Water runoff can cause damage to all types of property and buildings.  Water getting inside your house is never a good thing.  A Drainage System that utilizes a French Drain can help.

Drains can protect your home and property from water damage.

Large 6 Inch French Drain Installed in Norman
Large 6 Inch French Drain Installed in Norman

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

Drainage Systems can:

1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving under ground) away from the foundation.  Many times less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.  

Also, A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be. One side of a foundation alone,  can be over 100 feet.  A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation.

Surface Drain Installed next to sidewalk in Oklahoma City.
Surface Drain Installed next to sidewalk in Oklahoma City.

2.  Keep water away from small or enclosed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house, or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.  A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A Surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the Drainpipe that is connected to the Drain.

Surface Drain Installation in Norman
Surface Drain Installation in Norman

Simply put, a Drainage System is one or a group of underground Drainpipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both)  A simple Drainage System is a Drain for the water to enter, a Drain Pipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drainpipe.

Drainage Systems quickly can become more complicated.  Considerations must include:

How does the water get to the problem area?  There may be one or many sources.

Water Sources:

1.  It falls from the sky directly

2.  It flows down hill over the surface (surface water)

3.  It flows underground under the surface (sub-surface water)

4.  It flows from the edge of a roof ( There may be many roofs near the problem area, neighbors etc.)

5.  It flows from a gutter downspout

6.  It flows over the edge of a gutter because the gutter is too small is is clogged

7.  It flows up from the ground (seeps and springs are common in Oklahoma)

8.  It flows from a sprinkler system use ( yours or your neighbors)

9.  It flows from a leaking pipe ( water mains, water meters, water lines, sprinkler pipes, sprinkler valves)

There are other reasons for Drainage Problems, the above reasons are just the most common.

Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.  You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps however. 

How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.  It also helps to determine the size of Drainpipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drain Pipe.”  Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water.

For home and small business use typical materials used are:

6 inch, 9 inch, and 12 inch Surface Drains –

3 inch, 4 inch, and 6 inch Drainpipes —

3 inch, 4 inch, and 6 inch French Drains —

French Drains move more water than Surface Drains —

French Drains move Surface Water and Sub-Surface Water

Surface Drains move Surface Water only

Surface Drains look nicer than French Drains in most cases

Once the type and number of drains is determined and what size Drainpipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?)

The Drainage Curb Fitting is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drainpipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.

Cutting The Curb and Installing Curb Fitting for French Drain
Cutting The Curb and Installing Curb Fitting for French Drain

The Drainage Pop-Up Emitter is connected to the end of a Drainpipe.  It is downhill from a French Drain or a Surface Drain.  It is a small release basin with a green pop-up lid.  When releasing water, it pops up about an inch to release the water from the French Drain or Surface Drain.  When the Storm Water has moved through the Drainage System and out of the Pop-Up Emitter, the green lid closes back to its original closed position.  The emitter is designed to release water out into a yard or down a hill or other desirable Drainage Exit Point where there is no curb.

Popup Emitter to release water from a Drainage System in Yukon.
Popup Emitter to release water from a Drainage System in Yukon.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

Check out Sprinkler System Check-Up

 

Sometimes things go wrong with sprinkler systems.