French Drain Installation, Oklahoma City, Norman, Moore, Edmond
Oklahoma Drainage — 405 203 9419- Servicing all of Central and Western Oklahoma
FRENCH DRAIN, SURFACE DRAIN PHOTOS AND INFORMATION Standing water can cause many types of property damage ranging from foundation problems to cracked sidewalks and dead plants and shrubs. If you have need of French Drain or Surface Drain, give us a call. We provide free estimates for all of central Oklahoma.

French Drain With Colored Gravel in Oklahoma City

Installing Cement around Curb Fitting for French Drain in Norman
Some Drainage Systems are complex and incorporate several types of drains. Most Drainage Systems , however are basic and require just one type of Drain. Oklahoma Drainage and Sprinkler Repair installs a variety of drains to solve a variety of problems. French Drains, Surface Drains, and Channel Drains are most commonly used. If you live in Edmond and need a Channel Drain installed across your driveway, or if you live in Norman and need a French Drain in your backyard, or if you live in Oklahoma City and need a Surface drain installed next to your sidewalk, we can help.
Oklahoma Drainage and Sprinkler Repair provides Drainage Diagnostics . A Drainage Diagnostic is a scheduled appointment where we come out and look at your Drainage Problem and get your input on the situation. We look at all the variables that are causing your Water-Runoff Problems and design a Drainage System to solve it. French Drains and Surface Drains are used to make up the Drainage System.
Typically many things must be considered when completing a Drainage Diagnostic.
1. Identify the areas being damaged by water and determine if there are any hidden areas.
2. Identify the sources of water causing the damage. Most Drainage Problems have more than one source. A water source can fall from the sky as rain, or can flow down the hill as storm-water runoff, or can flow from a gutter down-spout (yours or your neighbor’s), or flow under ground as sub-surface water flow, or water can flow off a sidewalk, driveway, or street. (These are the most common)
3. Identify the Exit Point by determining where we want to take the unwanted water.
4. Determine what type of Drains can best solve the Drainage Problem. We utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.
5. Determine what type and size of Drain Pipe is needed to accommodate the volume of water to be drained. Larger is always better! Big Drains with Small Drain Pipes never works!
If you have problems with Standing Water after a hard rain, or your driveway or sidewalk turns into a moat after a thunderstorm, or worst of all, you have water standing against your foundation and seeping into your house and vents, Give us a Call! TYPICALLY A DRAINAGE SYSTEM IS MUCH LESS EXPENSIVE THAN FOUNDATION REPAIR OR REMOVING MOLD FROM YOUR HOME OR BUSINESS!!
























[…] name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993. I take great pride in my work. The Letters “CMG” stand for the first […]
[…] name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993. I take great pride in my work. The Letters “CMG” stand for the first […]
[…] Heads, or if you live in Norman and have Leaking Sprinkler Valves, or if you live in Edmond and your Sprinkler Controller quit working, give us a call or send us an e-mail. 405 – 226-0629 […]
[…] of a Sprinkler System is a necessary part of owning and operating an Irrigation System. Sprinkler Heads get run over by cars or get knocked out of adjustment by weed-eaters. Sprinkler Heads need to be […]
[…] of a Sprinkler System is a necessary part of owning and operating an Irrigation System. Sprinkler Heads get run over by cars or get knocked out of adjustment by weed-eaters. Sprinkler Heads need to be […]