Posts Tagged ‘Edmond Oklahoma French Drain’

Sprinkler Repair Experts

 

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR, Provides Expert Sprinkler Repair for:  Sprinkler Valves, Sprinkler Heads, Sprinkler Controllers, and the most common problem, Sprinkler Pipes or Sprinkler Leaks.

Sprinkler Repair Service is provided for: Oklahoma City, Norman, Edmond, Yukon, Mustang, Moore, Midwest City, Blanchard, New Castle, and all surrounding areas.

405 203 9419

 

Sprinkler Controller Repair is a service provided by Oklahoma Drainage.  A Sprinkler Controller is the “Brain,” of a Sprinkler System.  They can wear out or stop working.  Power surges in the home can cause damage to a controller.

Programming can be difficult for homeowners.  We can help with programming or replace a Sprinkler Module if it is defective.

Start Time Programming

“Start Time” programing many times is confusing for homeowners.  The definition of a Start Time is a time that is chosen for the sprinkler system to start watering.  It causes zone 1 to start running.  When zone 1 is finished it automatically stops and zone 2 begins.  When Zone 2 is complete it stops and zone 3 begins.  Simple enough Right!  This continues until the last zone programed available runs.

The confusion begins when people think that a time needs to be set to start zone 2 and 3 and so on.  This is not the case.  They follow zone 1 which has the only Start Time programmed into the controller.

Be Careful with Multiple Start Times, just use One at first.

Sprinkler Controllers have a feature providing multiple start times, up to 4 Start Times are usually available.  These additional start times are only used when a person wants to run the entire system more than once in a 24-hour period.

For Example, the first Start Time is set at 9Am.  Zone 1 begins to run at 9am.  When Zone 1 is done, say 10 minutes later, Zone 2 begins and runs for 10 minutes, then zone 3 follows and so on.  By 10 am let’s say all the zones have run.  Let’s say 8 hours later you have a second start time at 6 Pm.  Zone 1 comes on and runs and by 7pm all the zones have run again.  So, the controller has 2 start times which have caused the Sprinkler System to run start to finish twice in a 24-hour period.

Here is the big problem!  Some Homeowners believe the second start time is to start zone 2 running.  They also think that the 3rd start time is to start zone 3 and the 4-start time is to run zone 4.  No!!

So, this is how they program the controller.  At 9am they have a start time and zone 1 starts.  The homeowner programs a second start time at 9:10 am to mistakenly start zone 2.  Nope!  It starts zone 1 all over again.  At 9:2o they have a 3rd start time for zone 3.  Nope!  It starts zone 1 for a third time.  Now the controller is stuck in a loop and zone 1 runs constantly and won’t shut off.

If Sprinkler Controller Programming is confusing?  Make sure you only have One Start Time!

“Run Time,” is completed Next.  It determines how long each zone runs.  Zone One 10 Minutes,     Zone Two, 15 Minutes, Zone Three 8 Minutes.  You can set how long you want each zone to run.

French Drain Repair and Installation is a Central Focus for Oklahoma Drainage.  We installed our first French Drain and completed our first Sprinkler Repair in Norman in 1993.

We started with the Valves

The Sprinkler Valves were located in the back yard near the pool.  Six valves were located in one place.  They were very tightly connected in one Manifold.  None of the Sprinkler Valves had worked in a long time.  They were Toro Valves that were over 20 years old.  They all had to be replaced.

Surprisingly there was no shut-off valve for the Sprinkler Water.  The water had to be shut off at the Meter so we could install a Manual Shut off valve.  Once installed, the water was turned back on that ran to the house.   The water that ran to the Sprinkler System was shut off with our New Shut Off Valve.

Rainbird Sprinkler Valve

Rainbird Sprinkler Valve

The Sprinkler Valves Were Removed

Now, the 6 valves had to replaced.  The valves that were used were made by Rain Bird.  Before we began, I had to talk to the Customer.  The previous valve design was a bad idea to repeat.

The original Sprinkler Valves were crammed into one large valve box in one very tight manifold.  This is bad because the valves were too close to the fittings.  Simply put, if one valve had to be replaced or worked on in the future, all 6 valves had to be taken out and replaced.   If one valve was bad and 5 worked fine, they all still had to be replaced.

That’s Stupid!

I recommended that an additional Valve Box be installed putting 3 valves in each Valve Box.  This would allow plenty of space between the valve fittings.  If one Sprinkler Valve had to be adjusted or replaced in the future, the other 5 valves need not be disturbed.  Simple Enough!

Check For Leaks

Once the valves were replaced and working, it was time to turn on each Sprinkler Zone, one at a time.  Water was shooting up from the ground in several places in zone 1.  Two broken Sprinkler Pipes and 5 bad Sprinkler Heads in zone 1 had to be fixed and replaced.  We went through each of the 6 zones in similar fashion fixing lots of leaks and replacing bad sprinkler heads.

The Sprinkler Repair Cost About Half of the Cost of Completely New System.

Rotor and Pop-Up Sprinkler Heads

Rotor and Pop-Up Sprinkler Heads

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

Sprinkler Head Adjustment is a service provided by Oklahoma Drainage and Sprinkler Repair.  We have adjusted sprinkler heads since 1993.

Many times, Sprinkler heads get, “Out of Wack.”  Lawn mowers and weed eaters are notorious for this.  Sprinkler heads start spraying water in the wrong place.  It is frustrating to water concrete while plants and grass go without moisture.

Pop-Up Sprinkler Heads

Pop-Up Sprinkler Heads can be adjusted several ways.  How far water goes to the left or right can be increased or decreased.  The distance the water goes can also be increased or decreased.  Finally, how high a sprinkler head pops up can be increased or decreased by installing a taller or shorter head.

Sometimes sprinkler heads spray a reduced distance and don’t perform very well due to water scale.  Minerals in the water can completely clog a Pop-Up.  Usually, the sprinkler nozzle on top of the sprinkler head, need only be replaced without replacing the entire head.

Rotor Sprinkler Heads also can be adjusted to the left or right.  Spray Distance can be increased or decreased as well.

Needs Change

What’s going on in your yard can change.  This calls for Sprinkler Head Adjustment.  Adding or removing a swimming pool changes everything concerning sprinkler heads.  Any number of things can change the necessary sprinkler head coverage.

 

 

Oklahoma Drainage and Sprinkler Repair — Installing – French DrainsSurface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

Check out Sprinkler System Check-Up

 

 

 

A Good Place For A French Drain

Sprinkler Repair

If you have water standing in your back yard after a hard rain, or  If water stands on your driveway or sidewalk, we can help with all types or Residential Drainage and Standing Water problems.

Oklahoma Drainage and Sprinkler Repair has over 26 years of Experience Solving all types of Storm Water issues.  We utilize French Drains, Surface Drains and Channel Drains.  Our Drains are installed in Yards, Sidewalks, Driveways and Basements.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Drainage Systems

Some Drainage Systems are complex and incorporate several types of drains.  Most Drainage Systems , however are basic and require just one type of DrainOklahoma Drainage and Sprinkler Repair installs a variety of drains to solve a variety of problems. French Drains, Surface Drains, and Channel Drains are most commonly used.  If you live in Edmond and need a Channel Drain installed across your driveway, or if you live in Norman and need a French Drain in your backyard, or if you live in Oklahoma City and need a Surface drain installed next to your sidewalk, we can help.

Channel Drain Installed by CMG In Yukon

Channel Drain Installed In Yukon

Channel Drain

Channel Drains are one kind of Surface Drain that we install in concrete.

The most common Drain that we install is the French Drain.  This is because the French Drain is versatile.  It can handle Surface Water Problems or Underground Water Problems (sub-surface).  A huge mistake that many people make is assuming that water gets to a Problem Drainage Area by flowing over the surface only.

For example, if water is flowing down hill underground toward your home’s foundation, the only way to stop or intercept it is with a French Drain.  Water can flow laterally into a perforated French Drain Pipe.  It is then diverted away from the Problem Drainage Area to an Exit Point.

 

Popup Emitter to release water from a French Drain in Yukon

Popup Emitter to release water from a French Drain

Pop-Up Emitter

Pop Up Emitters can release water from Surface Drains or French Drains.  They can release water on to sidewalks or driveways, or out in the middle of yards.

French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.

Trench Liner

A Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.

There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe.

The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch limestone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).

 

 

Pipe running to street form French Drain in back yard.

Pipe running to street form French Drain in back yard.

When we run Drain Pipe across yards to an Exit Point, the sod usually can be put back into place and in a few days you can’t tell a French Drain was ever Installed.

French Drain Design

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

French Drain Repair and Installation is a Central Focus for Oklahoma Drainage.  We installed our first French Drain and completed our first Sprinkler Repair in Norman in 1993.

Oklahoma Drainage and Sprinkler Repair — Installing – French DrainsSurface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

French Drain Problem

The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the limestone.
Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is OK.  It won’t have a measurable effect on the performance of the French Drain.  In some cases thick grass growing up through the French Drain will create a natural “Thatch” filter.  This makes the French Drain invisible.

Making a French Drain Look Nice

The trick is to allow the grass to grow over the French Drain Gravel without covering it up with dirt.  Grasses such as Bermuda which grow well in the sun will put out runners and new roots and will grow up and through the French Drain.  This will not affect the performance of the French Drain.  The problem is that some times depending on the type of soil involved, it may take a long time to completely cover up the French Drain.  Sprinkling grass seed down in the gravel will speed up the process.

DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.   

Installing a Curb Outlet for a French Drain in Oklahoma City

Installing a Curb Outlet for a French Drain in Oklahoma City

Sunny Areas

If you install a French Drain in a sunny area, you can:
                                         A.  Leave the  French Drain as-is and allow grass to grow over it in time.
                                         B.  Add grass seed directly to the French Drain gravel with (Light Hand Watering) to speed the growth process
                                         C.  Leave the French Drain as-is but decorate it with stepping stones and landscaping rocks ( leaving large cracks between stones to allow water to get into the French Drain,
2
If you install a French Drain in a shady area you can:
                                        A.  Leave the French Drain as-is, it will work well and look as it did for many years.

                                        B.  Leave the French Drain as-is, but decorate it with stepping stones or landscaping rocks.  Many French Drains are hidden under rock walk ways.

French Drain in Oklahoma City

French Drain in Oklahoma City


Sometimes Surface Drains make more sense when the Drainage Problem area is fairly small with Surface Water Flowing into it.

 

French Drain with stepping stones

French Drain with stepping stones

Drainage Installation, Sprinkler Repair, Oklahoma City, Norman, Edmond.

French Drain Installation

French Drain Trench running to curb outlet

Oklahoma Drainage – 405 203 9419

French Drain Installation—   French Drains are designed to do a lot of things.  If you have an area that has unwanted water standing in it or running across it, a French Drain can be the answer.

A French Drain is a trench that runs across the Drainage Problem Area.  A French Drainpipe is placed in the bottom of the trench.  The French Drainpipe is perforated with thousands of small holes.  In most cases the Drainpipe has a nylon soc around the pipe to act as a filter for the French Drain.

The French Drain trench is then filled with some type of small rock or stone.  We typically use crushed 1 inch Lime Stone to cover the French Drainpipe.  The dirt that was dug out of the trench is taken away or spread out around the French Drain.  The Limestone replaces the dirt and fills the French Drain Trench all the way to the surface. Decorative Stones may be placed on top of the drain or grass may be allowed to grow over it over time.  Just don’t put dirt back on top of the drain.

drain trench

French Drain running to a curb outlet at the street

 

Decorative River Rock French Drain

French Drain with River Rock

Oklahoma Drainage– We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water damaging your foundation, We can install a French Drain for you.

If you live in Norman and have water standing on your driveway, We can install a Channel Drain for you.

If you live in Edmond and have water flooding your basement, We can install a Sump Pump for you.

If you live in Moore and have water washing out your flower bed mulch, We can install a Surface Drain for you.

If you live in Yukon and need grass to grow we can install Sod too!

Servicing All of Central and Western Oklahoma Since 1993.

French Drain Installation, Drainage Systems, Surface Drain, Sump pumps, – Oklahoma Drainage

Hard rain and flooding seem to be more common all the time.  When I started this business in 1993, having over an inch of rainfall in an hour was pretty extreme.  Now having over 4 inch an hour rainfall is not unheard of and is becoming more common.

Protecting our homes and businesses from unwanted water should be a goal for all of us.

Oklahoma Drainage has seen and dealt with virtually every possible Drainage and Standing water problem that can occur in or around your home.  With over 2000 Drainage Systems installed since 1993, we have amassed a great deal of experience.  This is help full in seeing underlying problems and secondary issues that may be hard to see at first for the ” Untrained Eye.”  This allows us to get things right the first time.

In this business EXPERIENCE TRULY COUNTS!

Hiring your brother-in-law to put in your Drainage System or French Drain is as bad as hiring a Lawn mowing company that does landscaping and drains too?  Water can cause a huge amount of damage.  How important is your money and your home?

Blane Callen, 405 203 9419

Oklahoma Drainage can help with this type of situation.

This is a great place for a French Drain

 

Installing French Drain under sidewalk

Installing French Drain under sidewalk

 

French Drain Installation this week was a little more difficult than normal.  Many times, the route that a Perforated French Drainpipe must travel to its exit point is not very easy from an installation point of view.

French Drains may have to travel through tree roots, (big ones) under sidewalks, through retaining walls, around swing sets or dog kennels or Mom’s Prize Rose Bush.

Huge Elm Trees

The 4 inch French Drain we installed this week was in Oklahoma City south of 23rd in an old part of town where all the houses were old 2 or 3 story homes with lots of huge Elm Trees.

The Elm Tree in Question actually was just an old stump that had been topped out but not completely removed.  They left the roots just for us!  The roots were growing into the homes foundation and were right in the way of the path of the French Drain.

Forty feet of solid Elm Roots and 4 chain-saw blades later We were successful in running a new French Drain through a tree stump.  Yuck! “Well you gotta  do what you gotta do!”

 

 

French Drain with colored river rock

French Drain with colored river rock

A little info about French Drainpipe and Tree Roots.

Normally tree roots don’t seek out and penetrate French Drainpipe.  Tree roots seek moisture and residual water that may stay inside Solid Drainpipe.

French Drainpipe is perforated.  Water that does not reach the exit point of the French Drain will seep out of the Pipe into the surrounding dirt.

Solid Drainpipe that is used with Surface Drains can be penetrated and eventually clogged by roots if the pipe does not have good slope or “Fall”.  If the solid pipe does not drain well and has residual water, tree roots will seek it out.

 

Oklahoma City French Drain Service, Edmond, Norman, Yukon, French Drain repair.

French Drain Installation Next to Wall

French Drain Installation Next to Wall, Installing Trench Liner

Oklahoma Drainage – 405 203 9419 — Servicing all of Central and Western Oklahoma

Recently we had a customer call us with a drainage problem.  She had water standing in front of garage door.  If it got high enough it would run into the garage.  We installed Surface Drains in the Driveway in front of the garage door in the concrete.  The Surface Drains had metal grates and could easily support the weight of a car once the concrete had cured.

Standing Water can cause all types of problems in and around homes in Oklahoma.

We use several types of drains to solve several types of drainage problems.  Oklahoma Drainage utilizes French Drains, Surface Drains and Channel Drains.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump Pumps.   With over 25 years of experience we provide top quality French Drains, Drainage Systems.

 

French Drain in Oklahoma City

French Drain in Oklahoma City

 

clogged French Drain Pipe

result of French Drain Installed Incorrectly

 

 

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drainpipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drainpipe.

French Drain Fill

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The limestone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).

French Drain Liner

In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it.

 

 

 

 

 

French Drain Service Oklahoma City

 

A good place for a French Drain

 

Do you have water standing in your yard after a hard rain? Does your sidewalk become a moat during a thunderstorm? Is standing water causing your foundation to deteriorate and break down? Is water seeping into your home and causing mold?

Stormwater runoff can cause many types of problems. Oklahoma Drainage and Sprinkler Repair can diagnose your drainage issues and design a Drainage System to fit your specific needs. We install many types of drains including French Drains, Channel Drains, Surface Drains, Basin Drains, Trench Drains, Basement Drains, and Sump Pumps.

 

 

A French Drain would help

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump Pumps.   With over 33 years of experience, we provide top quality French Drains, Drainage Systems, and Sprinkler Repair.

 

French Drain in Oklahoma City

French Drain in Oklahoma City

French Drain Inside Rest Home

 

 

We Service all of Central Oklahoma including Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.  Now we provide service to Lawton and Altus as well.

Drainage System Installation in Norman

Drainage System Installation in Norman

 

Water can cause damage in all kinds of places.  A Drainage System, simply put, is a Drain with a Drainpipe leading underground to an exit point.  Most Drainage Systems utilize a French Drain or a Surface Drain, or both.

Oklahoma Drainage and Sprinkler Repair provide Drainage Diagnostics.  A Drainage Diagnostic is a scheduled appointment where we come out and look at your Drainage Problem and get your input on the situation.

We look at all the variables that are causing your Water-Runoff Problems and design a Drainage System to solve it.  French Drains and Surface Drains are used to make up the Drainage System.

Typically, many things must be considered when completing a Drainage Diagnostic.

1.  Identify the areas being damaged by water and determine if there are any hidden areas.

2.  Identify the sources of water causing the damage.  Most Drainage Problems have more than one source.  A water source can fall from the sky as rain or can flow down the hill as stormwater runoff or can flow from a gutter down-spout (yours or your neighbor’s), or flow underground as sub-surface water flow, or water can flow off a sidewalk, driveway, or street.  (These are the most common)

3.  Identify the Exit Point by determining where we want to take the unwanted water.

4.  Determine what type of Drains can best solve the Drainage Problem.  We utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.

5.  Determine what type and size of Drainpipe is needed to accommodate the volume of water to be drained.  Larger is always better!  Big Drains with Small Drainpipes never works!

If you have problems with Standing Water after a hard rain, or your driveway or sidewalk turns into a moat after a thunderstorm, or worst of all, you have water standing against your foundation and seeping into your house and vents, Give us a Call!

TYPICALLY, A DRAINAGE SYSTEM IS MUCH LESS EXPENSIVE THAN FOUNDATION REPAIR OR REMOVING MOLD FROM YOUR HOME OR BUSINESS!!

Drainage System Installation, Gutter Down Spouts Connected.

Drainage System Installation, Gutter Down Spouts Connected.

Sprinkler System Checkup is a Service Provided by Oklahoma Drainage since 1993.

Now is a good time to have a Sprinkler System Checkup provided by Oklahoma Drainage.

Sprinkler Systems need to be checked before winter to prevent pipes from freezing.  Sprinkler Design determines whether sprinkler lines need to be bled.  Emergency shut off valves also need to be checked and turned off for the winter.

In the Spring, all the water needs to be turned back on and all sprinkler zones and heads need to be tested.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provide Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Sprinkler Valves

Sprinkler Valve Replacement is a service that Oklahoma Drainage has provided Since 1993.  Recently we removed 3 Rainbird Sprinkler Valves and replaced them with new ones.  The valves had been crushed accidentally when a landscaper drove his truck across the yard.

Sprinkler System Check-Up in Edmond, Oklahoma City, Norman, and Moore.

 

 

Sprinkler System Check-Up process is very straightforward.  We run through all the Sprinkler Zones one-at-a- time from the controller. 

Sprinkler Controller

Sprinkler controllers can be a problem source.   Many times, the wires in the controller are loose or have a “Short” in one of the wires.  Sprinkler Programming can be a source of frustration.  We can help with Programming your controller.

We check all the sprinkler heads in that zone and the valves as well.

Once the Sprinkler System Checkup is Complete, we provide a Quote for what it will cost to make the needed repairs.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.  405 203 9419

Sprinkler Valve Replacement is a service that Oklahoma Drainage has provided Since 1993.  Recently we removed 3 Rainbird Sprinkler Valves and replaced them with new ones.  The valves had been crushed accidentally when a landscaper drove his truck across the yard.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provide Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

First Step

First, we dug up a good working area surrounding the broken Sprinkler Valves.  Next, we cut out the broken valves and crushed PVC pipes.  Finally, PVC pipe was cut and glued with new Sprinkler Valves following the original design and configuration.  In this case the three original sprinkler valves were connected to each other inside one Valve Box.

We aren’t done yet though; two sprinkler wires must be connected to each Valve.  One sprinkler wire is the “Common Ground.”  The other wire is the power wire.  All the sprinkler wiring is connected with water-proof wire connections.

The Common Ground wire and the Individual Power Wires all come from the Sprinkler Controller.  Each Sprinkler Valve has its own power wire coming from the Controller.  All the Sprinkler Valves are Connected to the Same Common Ground Wire.

Sprinkler Valve Replacement

Oklahoma City Sprinkler Repair

Before We Finish

Before dirt can be put back around the new valves, testing must be done.  Each valve must be turned on, “one-at-a-time,” at the Controller to ensure good wire connection and functionality.  Also, the Sprinkler Valves must be checked for leaks in the PVC Pipe.

Oklahoma Drainage and Sprinkler Repair provides Expert Service for Sprinkler Heads, Valves, Controllers and all other Sprinkler System difficulties.  We service Norman, Edmond, Oklahoma City, Moore, Yukon, Mustang, and Midwest City.

Blanchard Sprinkler Repair has been provided by Oklahoma Drainage and Sprinkler Repair since 1993.

Sprinkler Controller Repair is a service provided by Oklahoma Drainage.  A Sprinkler Controller is the “Brain,” of a Sprinkler System.  They can wear out or stop working.  Power surges in the home can cause damage to a controller.

Sprinkler Controller

French Drain, Oklahoma City, Moore, Norman, Edmond, Mustang, Altus

Oklahoma Drainage and Sprinkler Repair – 405 203 9419 — Servicing Central and Western Oklahoma

Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump Pumps.   With over 25 years of experience we provide top quality French Drains, Drainage Systems, and Sprinkler Repair.

 

French Drain in Oklahoma CityFrench Drain in Oklahoma City

 

We Service all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.  Now we provide service to Lawton and Altus as well.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Water can cause damage in all kinds of places.  A Drainage System, simply put, is a Drain with a Drain Pipe leading underground to an exit point.  Most Drainage Systems utilize a French Drain or a Surface Drain, or both.

Oklahoma Drainage and Sprinkler Repair provide Drainage Diagnostics  .  A Drainage Diagnostic is a scheduled appointment where we come out and look at your Drainage Problem and get your input on the situation.  We look at all the variables that are causing your Water-Runoff Problems and design a Drainage System to solve it.  French Drains and Surface Drains are used to make up the Drainage System.

Typically, many things must be considered when completing a Drainage Diagnostic.

1.  Identify the areas being damaged by water and determine if there are any hidden areas.

2.  Identify the sources of water causing the damage.  Most Drainage Problems have more than one source.  A water source can fall from the sky as rain or can flow down the hill as stormwater runoff or can flow from a gutter down-spout (yours or your neighbor’s), or flow underground as sub-surface water flow, or water can flow off a sidewalk, driveway, or street.  (These are the most common)

3.  Identify the Exit Point by determining where we want to take the unwanted water.

4.  Determine what type of Drains can best solve the Drainage Problem.  We utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.

5.  Determine what type and size of Drainpipe is needed to accommodate the volume of water to be drained.  Larger is always better!  Big Drains with Small Drain Pipes never works!

If you have problems with Standing Water after a hard rain, or your driveway or sidewalk turns into a moat after a thunderstorm, or worst of all, you have water standing against your foundation and seeping into your house and vents, Give Oklahoma Drainage a Call.   405 203 9419

TYPICALLY, A DRAINAGE SYSTEM IS MUCH LESS EXPENSIVE THAN FOUNDATION REPAIR OR REMOVING MOLD FROM YOUR HOME OR BUSINESS!!

 

Oklahoma City French Drain Installation,  Servicing all of Central and Western Oklahoma

Standing Water can cause all types of problems in and around homes in Oklahoma.

swampy french drain area

A good place for a French Drain

Oklahoma Drainage and Sprinkler repair can help.  We can put a Drain in a Driveway, or fix a leaking Sprinkler Valve.

If you have water standing in your yard and need a French Drain, or have a broken Back Flow Valve that has frozen and is leaking, We can help.

405 203 9419

French Drain Pipe running to curb outlet in Oklahoma City.

French Drain Pipe running to curb outlet in Oklahoma City.

 

 

 

When installing a Drainage System of any type, a decision must be made on the size of Drain Pipe used.  Typically 6 inch, 4 inch, and 3 inch are the most common in Residential Drainage Systems.

 

If you have one or two 6 inch Surface Drains or a stretch of French Drain that is less than 10 feet, then a 3 inch drain pipe can be used.   Three inch drain pipe is used for low volume applications.

4 inch and 6 inch

4 inch and 6 inch Drain Pipe

If you have two or three 12 inch Surface Drains or a stretch of French Drain that is 60 feet or less, then 4 inch drain Pipe should do the job.

If you have Six 12 inch Surface Drains or less or 100 Feet of French Drain, Then the use of 6 inch drain pipe becomes necessary.

two French Drain

100 feet of french drain

These numbers can be exceeded.  More Surface Drains or French Drain can be added to the above listing, however the drain pipe will be overwhelmed at times of heavy rain.  If it is OK with you for your French Drains or Surface Drains to Stand Underwater for a while until the Drainage System can catch up and clear the excess water away.  How long it stays underwater varies from one application to another.

Slope is a big consideration.  If your drain pipe runs downhill nicely and the water moves quickly, then you can exceed the above numbers.  If you have very little slope and your Drain Pipe only runs downhill slightly, then installing fewer drains is definitely a good idea.

Connecting a gutter downspout to a drain that only has a small slope is always a good idea.  The water on the roof has nice velocity when it comes out the gutter and into the drain pipe.  It speeds up the water movement when the slope ins’t very good.  It also causes suction behind the gutter downspout in the French Drain or Surface Drain that you have installed.

Sprinkler Repair Service and French Drain Installation

Oklahoma Drainage — 405 203 9419

Oklahoma Drainage — We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water damaging your foundation, We can install a French Drain for you.

If you live in Norman and have water standing on your driveway, We can install a Channel Drain for you.

If you live in Edmond and have water flooding your basement, We can install a Sump Pump for you.

If you live in Moore and have water washing out your flower bed mulch, We can install a Surface Drain for you.

If you live in Yukon and need grass to grow we can install Sod too!

Servicing All Of Central And Western Oklahoma Since 1993.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

 

Hard rain and flooding seem to be more common all the time.  When I started this business in 1993, having over an inch of rainfall in an hour was pretty extreme.  Now having over 4 inch an hour rainfall is not unheard of and is becoming more common.

Protecting our homes and businesses from unwanted water should be a goal for all of us.

Oklahoma Drainage has seen and dealt with virtually every possible Drainage and Standing water problem that can occur in or around your home.  With over 2700 Drainage Systems installed since 1993, we have amassed a great deal of experience.  This is helpful in seeing underlying problems.  We look for Secondary Water Issues not just the Primary ones.   In this business EXPERIENCE TRULY COUNTS!

Hiring your brother- in- law  or a Landscape Company to put in your Drainage System is a bad idea.  If a landscape company also installs French Drains, you should run!

Why don’t they specialize???  Does your Lawyer also do physical therapy?

Some Builders also make bad choices concerning drainage on new homes they are building.  New houses should not  have problems with water.   Builders usually have a landscape company that installs their drains.  Sometimes its a maintenance guy that works for the builder.  It’s Usually the cheapest fix possible.  I’ve testified in more than one class action lawsuit where a whole housing sub-division had unnecessary Drainage Issues.

Water can cause a huge amount of damage.  How important is your money and your home?  Over 30% of the work done by Oklahoma Drainage is fixing other people’s mistakes.   I appreciate the work, but I get frustrated when bad things happen to good people concerning water!

Blane Callen, 405 203 9419

 

 

Servicing all of Central and Western Oklahoma since 1993

This week we installed a 6 Inch French Drain in Oklahoma City.  Water was running down the hill, under the back fence, into the back yard, across the sidewalk, and into the side door going into the garage.  After every heavy rain, water was getting into the garage.  We installed a 6 Inch French Drain across the back yard to divert the water.  We also connected the Gutter Down Spouts Directly into the French Drain.  Once the French Drain was down hill from the house, we changed from French Drain Pipe to solid 6 inch ADS Drain Pipe and continued across the front yard to the street.  Once at the curb, we cut the curb with a concrete saw and installed a Curb Outlet for the French Drain.  Problem solved!

 

Something to think about — Most people see and deal with what is obvious when it comes to Drainage Problems.  Surface Water is “Obvious”!  People see it washing over the surface into the area that collects the water.  Simple enough.

A good place for a French Drain

Water Standing in your yard can be tricky.

Designing a Drainage System to intercept the Surface Water is the first step, but many times is not the only step.  Often Sub-Surface Water( Water Running Under Ground ) is not accounted for by people with less experience in designing Drainage Systems.  They install A Drainage System that uses Surface Drains to Intercept the running surface water.  Sometimes that works if that is the only water source to the Problem Drainage Area.

Surface Drains drain surface water away only.  Sub Surface water runs right around them and into the same Problem Drainage Area.  There may be less water there than there was before but the problem still remains.

A French Drain is the solution when water is running into a problem area over the surface and under ground.  A French Drain solves both problems and the area will be dry.

A French Drain Can Handle Surface and Sub-Surface Water

 

Installing a French Drain outlet through the curb in Oklahoma City

Installing a French Drain outlet through the curb in Oklahoma City

 

We also install a variety of other types of Drains. Our Drainage Systems may utilize: French Drains, Surface Drains, Channel Drains and Sump Pumps. In the past 30 years we have installed French Drains to keep water away from foundations and driveways as well as keeping yards dry.  Sometimes a Surface Drain may be set in dirt or concrete and is a better solution than a French Drain.  Experience counts when diagnosing an Drainage Problem.

 

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage System Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

 

Installation of a Drainage System, French Drain, In Norman Oklahoma

Installation of a Drainage System, French Drain, In Norman Oklahoma

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give us a call.

If you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain, We specialize in just that!

 

Servicing all of Central and Western Oklahoma

Sprinkler Repair Service Oklahoma City.  Oklahoma Drainage and Sprinkler Repair provides Expert Service for Sprinkler Heads, Valves, Controllers and all other Sprinkler System difficulties.  We service Norman, Edmond, Oklahoma City, Moore, Yukon, Mustang, and Midwest City.

 

Sprinkler Controller Repair is a service provided by Oklahoma Drainage.  A Sprinkler Controller is the “Brain,” of a Sprinkler System.  They can wear out or stop working.  Power surges in the home can cause damage to a controller.

Programming can be difficult for homeowners.  We can help with programming or replace a Sprinkler Module if it is defective.

Start Time Programming

“Start Time” programing many times is confusing for homeowners.  The definition of a Start Time is a time that is chosen for the sprinkler system to start watering.  It causes zone 1 to start running.  When zone 1 is finished it automatically stops and zone 2 begins.  When Zone 2 is complete it stops and zone 3 begins.  Simple enough Right!  This continues until the last zone programed available runs.

The confusion begins when people think that a time needs to be set to start zone 2 and 3 and so on.  This is not the case.  They follow zone 1 which has the only Start Time programmed into the controller.

Be Careful with Multiple Start Times, just use One at first.

Sprinkler Controllers have a feature providing multiple start times, up to 4 Start Times are usually available.  These additional start times are only used when a person wants to run the entire system more than once in a 24-hour period.

For Example, the first Start Time is set at 9Am.  Zone 1 begins to run at 9am.  When Zone 1 is done, say 10 minutes later, Zone 2 begins and runs for 10 minutes, then zone 3 follows and so on.  By 10 am let’s say all the zones have run.  Let’s say 8 hours later you have a second start time at 6 Pm.  Zone 1 comes on and runs and by 7pm all the zones have run again.  So, the controller has 2 start times which have caused the Sprinkler System to run start to finish twice in a 24-hour period.

Here is the big problem!  Some Homeowners believe the second start time is to start zone 2 running.  They also think that the 3rd start time is to start zone 3 and the 4-start time is to run zone 4.  No!!

So, this is how they program the controller.  At 9am they have a start time and zone 1 starts.  The homeowner programs a second start time at 9:10 am to mistakenly start zone 2.  Nope!  It starts zone 1 all over again.  At 9:2o they have a 3rd start time for zone 3.  Nope!  It starts zone 1 for a third time.  Now the controller is stuck in a loop and zone 1 runs constantly and won’t shut off.

If Sprinkler Controller Programming is confusing?  Make sure you only have One Start Time!

“Run Time,” is completed Next.  It determines how long each zone runs.  Zone One 10 Minutes,    Zone Two, 15 Minutes, Zone Three 8 Minutes.  You can set how long you want each zone to run.

French Drain Repair and Installation is a Central Focus for Oklahoma Drainage.  We installed our first French Drain and completed our first Sprinkler Repair in Norman in 1993.

Oklahoma Drainage and Sprinkler Repair — Installing – French DrainsSurface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

Sprinkler Head Installation

Sprinkler Repair Oklahoma City

 

What Is a Sprinkler Valve?

Think of a Sprinkler Valve as an “Off or On” Switch.    The Sprinkler Controller   turns the valves on or off.

It Sends a signal through a wire which is underground to the sprinkler valve somewhere in your yard.

Once turned on, the valve lets water pass through a sprinkler pipe to a specific group of sprinkler heads called a Sprinkler Zone.  The controller allows water to reach the sprinkler heads for a certain amount of time running through the sprinkler valve.  Once the time is up, it shuts off the sprinkler valve and moves on to the next valve in sequence.

Think of it as walking into every room in your house one at a time.  As you enter you turn on the light.  As you leave you turn off the light and move to the next room. You are the controller.  The light switch represents the sprinkler valve.

What causes a Sprinkler Valve to stop working?

Like anything else, a sprinkler valve can wear out.   Sprinkler valves fail in closed position.  It won’t run continuously if it breaks.

Sprinkler Valves get stuck while running sometimes.   The water supply must be then turned off to stop the Sprinkler from running.

Sprinkler Valves can freeze and break in the winter if the sprinkler system has not been properly drained for winter’s cold.

(winterized)

Tree roots can twist or break sprinkler pipes running into sprinkler valves.  Magnolia Trees are really bad about this.  Oak trees can cause damage too.

Driving something heavy across your yard can crush sprinkler valves.  Usually riding lawnmowers don’t cause damage but any truck or car will if you drive over a valve.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Lawn Sprinkler Service Choctaw

This week Oklahoma Drainage and Sprinkler Repair overhauled a flowerbed Sprinkler Zone in a Sprinkler System in East Choctaw.  The homeowner had an existing Sprinkler System that was in good shape for the most part but had problems with the flowerbed Sprinkler Zone.

It had a Drip Sprinkler Zone installed.  The Drip Sprinkler System was installed correctly but was not practical for the flower bed.  The flowerbed was very sandy and could not retain water very well even with good mulch.  Plus, the surrounding brick walls increased the amount of heat the plants had to endure in the summer.  The Drip Sprinkler Zone could not provide enough water fast enough for the plants.

We provide:

1.  Sprinkler Valve Problems

2.  Sprinkler Wiring Problems

3.  Sprinkler Controller Problems / Sprinkler Clock Problems

4.  Sprinkler Head Problems

5.  Sprinkler Pipe Problems

6.  Sprinkler Coverage Problems

7.  Sprinkler Redesign Problems for new fences or swimming pools.

Oklahoma Drainage Installs Drainage Systems,  and provides Expert Sprinkler System Repair.

Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump Pumps.  

We Service all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Back-Flow-Valve Service, Sprinkler Repair

Oklahoma Drainage and Sprinkler Repair Provides Service for Back-Flow-Valves and all types of Lawn Sprinkler Repair and Service.  We have provided Expert Service for all of Central and Western Oklahoma Since 1993.

Back-Flow-Valves

There are two types of Back-Flow-Valves.

Above Ground

Above Ground Back-Flow-Valve

Above Ground Back-Flow-Valve.

 

Below Ground Back-Flow-Valve.

Below Ground Back-Flow-Valve

Below Ground Back-Flow-Valve

What is a Back-Flow-Valve?

A Back-Flow-Valve is a part of a Lawn Sprinkler System.  Water passes through it from the water source which can be a Water Meter or a Well Pump.  It forces water to travel in only one direction from the source to the sprinkler system.  It can’t travel backward back to the water source which again is a water meter or well pump.

A Back-Flow-Valve provides protection to the water source from back pressure and chemical contamination from lawn fertilizer.

Most Cities require a Back-Flow-Valve as “Code” for Sprinkler Installation.

Emergency Shut off

Back-Flow-Valves usually have an Emergency Shutoff valve on them that can shut off the water to the lawn sprinkler system but keep the water turned on to the home. Most Back-Flow-Valves have two Emergency Shut off Handles.  Either one will work.  Many times, they are hard to turn, however.

If there is a leak or water is shooting up in the air just turn the valve handle and give us a call.

In ground Back-Flow-Valve

Blue Emergency Shutoff handles for a Back-Flow-Valve.

Norman Sprinkler Checkup is a Central Focus for Oklahoma Drainage.  We Performed or first Sprinkler Repair in Norman in 1993.  It was in Brookhaven on the West side of Norman.

Recently we had a customer in Oklahoma City who wanted to move his Sprinkler Valves.  They were in a bad place in his flower bed.  He wanted to plant a tree where the valves were located.

We moved 4 Sprinkler Valves about feet out into the yard.  All the Sprinkler Pipes had to be redesigned and installed matching the new location and maintaining full functionality.

 

If you have water running down the street in the middle of the night because your sprinkler system is leaking or won’t shut off, give Oklahoma Drainage and Sprinkler Repair a call.  405 203 9419

Norman Sprinkler Repair, Edmond, Oklahoma City

Recently we fixed a broken Sprinkler Pipe under a driveway in Norman.  It was leaking out onto the street every time the sprinkler system ran.   The pipe had to be removed and a new PVC pipe put in its place.

It was located on the west side of Norman in Brookhaven.

Oklahoma Drainage and Sprinkler Repair provide Expert Service for Sprinkler Heads, Valves, Controllers and all other Sprinkler System difficulties.  We service Norman, Edmond, Oklahoma City, Moore, Yukon, Mustang, and Midwest City.

 

Sprinkler Controller Repair is a service provided by Oklahoma Drainage.  A Sprinkler Controller is the “Brain,” of a Sprinkler System.  They can wear out or stop working.  Power surges in the home can cause damage to a controller.

Programming can be difficult for homeowners.  We can help with programming or replace a Sprinkler Module if it is defective.

Start Time Programming

“Start Time” programing many times is confusing for homeowners.  The definition of a Start Time is a time that is chosen for the sprinkler system to start watering.  It causes zone 1 to start running.  When zone 1 is finished it automatically stops and zone 2 begins.  When Zone 2 is complete it stops and zone 3 begins.  Simple enough Right!  This continues until the last zone programed available runs.

The confusion begins when people think that a time needs to be set to start zone 2 and 3 and so on.  This is not the case.  They follow zone 1 which has the only Start Time programmed into the controller.

Be Careful with Multiple Start Times, just use One at first.

Sprinkler Controllers have a feature providing multiple start times, up to 4 Start Times are usually available.  These additional start times are only used when a person wants to run the entire system more than once in a 24-hour period.

For Example, the first Start Time is set at 9Am.  Zone 1 begins to run at 9am.  When Zone 1 is done, say 10 minutes later, Zone 2 begins and runs for 10 minutes, then zone 3 follows and so on.  By 10 am let’s say all the zones have run.  Let’s say 8 hours later you have a second start time at 6 Pm.  Zone 1 comes on and runs and by 7pm all the zones have run again.  So, the controller has 2 start times which have caused the Sprinkler System to run start to finish twice in a 24-hour period.

Here is the big problem!  Some Homeowners believe the second start time is to start zone 2 running.  They also think that the 3rd start time is to start zone 3 and the 4-start time is to run zone 4.  No!!

So, this is how they program the controller.  At 9am they have a start time and zone 1 starts.  The homeowner programs a second start time at 9:10 am to mistakenly start zone 2.  Nope!  It starts zone 1 all over again.  At 9:2o they have a 3rd start time for zone 3.  Nope!  It starts zone 1 for a third time.  Now the controller is stuck in a loop and zone 1 runs constantly and won’t shut off.

If Sprinkler Controller Programming is confusing?  Make sure you only have One Start Time!

“Run Time,” is completed Next.  It determines how long each zone runs.  Zone One 10 Minutes,   Zone Two, 15 Minutes, Zone Three 8 Minutes.  You can set how long you want each zone to run.

French Drain Repair and Installation is a Central Focus for Oklahoma Drainage.  We installed our first French Drain and completed our first Sprinkler Repair in Norman in 1993.

We started with the Valves

The Sprinkler Valves were located in the back yard near the pool.  Six valves were located in one place.  They were very tightly connected in one Manifold.  None of the Sprinkler Valves had worked in a long time.  They were Toro Valves that were over 20 years old.  They all had to be replaced.

Surprisingly there was no shut-off valve for the Sprinkler Water.  The water had to be shut off at the Meter so we could install a Manual Shut off valve.  Once installed, the water was turned back on that ran to the house.   The water that ran to the Sprinkler System was shut off with our New Shut Off Valve.

Rainbird Sprinkler Valve

Rainbird Sprinkler Valve

The Sprinkler Valves Were Removed

Now, the 6 valves had to replaced.  The valves that were used were made by Rain Bird.  Before we began, I had to talk to the Customer.  The previous valve design was a bad idea to repeat.

The original Sprinkler Valves were crammed into one large valve box in one very tight manifold.  This is bad because the valves were too close to the fittings.  Simply put, if one valve had to be replaced or worked on in the future, all 6 valves had to be taken out and replaced.   If one valve was bad and 5 worked fine, they all still had to be replaced.

That’s Stupid!

I recommended that an additional Valve Box be installed putting 3 valves in each Valve Box.  This would allow plenty of space between the valve fittings.  If one Sprinkler Valve had to be adjusted or replaced in the future, the other 5 valves need not be disturbed.  Simple Enough!

Check For Leaks

Once the valves were replaced and working, it was time to turn on each Sprinkler Zone, one at a time.  Water was shooting up from the ground in several places in zone 1.  Two broken Sprinkler Pipes and 5 bad Sprinkler Heads in zone 1 had to be fixed and replaced.  We went through each of the 6 zones in similar fashion fixing lots of leaks and replacing bad sprinkler heads.

The Sprinkler Repair Cost About Half of the Cost of Completely New System.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

Sprinkler Head Adjustment is a service provided by Oklahoma Drainage and Sprinkler Repair.  We have adjusted sprinkler heads since 1993.

Many times, Sprinkler heads get, “Out of Wack.”  Lawn mowers and weed eaters are notorious for this.  Sprinkler heads start spraying water in the wrong place.  It is frustrating to water concrete while plants and grass go without moisture.

Pop-Up Sprinkler Heads

Pop-Up Sprinkler Heads can be adjusted several ways.  How far water goes to the left or right can be increased or decreased.  The distance the water goes can also be increased or decreased.  Finally, how high a sprinkler head pops up can be increased or decreased by installing a taller or shorter head.

Sometimes sprinkler heads spray a reduced distance and don’t perform very well due to water scale.  Minerals in the water can completely clog a Pop-Up.  Usually, the sprinkler nozzle on top of the sprinkler head, need only be replaced without replacing the entire head.

Rotor Sprinkler Heads also can be adjusted to the left or right.  Spray Distance can be increased or decreased as well.

Needs Change

What’s going on in your yard can change.  This calls for Sprinkler Head Adjustment.  Adding or removing a swimming pool changes everything concerning sprinkler heads.  Any number of things can change the necessary sprinkler head coverage.

Norman sprinkler repair

 

Oklahoma Drainage and Sprinkler Repair — Installing – French DrainsSurface Drains

French Drain Installation in Oklahoma City

Oklahoma Drainage –  We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water damaging your foundation, We can install a French Drain for you.

If you live in Norman and have water standing on your driveway, We can install a Channel Drain for you.

If you live in Edmond and have water flooding your basement, We can install a Sump Pump for you.

If you live in Moore and have water washing out your flower bed mulch, We can install a Surface Drain for you.

If you live in Yukon and need grass to grow we can install Sod too!

Oklahoma Drainage  –  In business since 1993 – Servicing Central and Western Oklahoma

405 203 9419

 

French Drain

Just what is a “French Drain?”  Many times people incorrectly use the phrase, “French Drain,” to apply to many different types of Drains that could be used in a Drainage System.  The term is widely used and many times incorrectly connected to “Surface Drains,” or “Channel Drains.

A Surface Drain has a grate that sits on top of a basin.  The basin is underground.  A Drainpipe is connected underground to an outlet on the Drain BasinStorm-Water Drains through the grate into the Drain Basin.  Once in the Drain Basin, water travels out of the basin through a Drainpipe.  The Stormwater continues downhill in an underground Drainpipe to an exit point.

THIS IS NOT A FRENCH DRAIN!

A Surface Drain may come in many different shapes or sizes.  The Drain Grate may be round or square.  Here is a picture of a common Surface Drain.

A Channel Drain is a type of Surface Drain, and many times is installed in concrete across sidewalks or driveways.

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drainpipe in the bottom of a trench.  The Drain Pipe should have a neoprene sock around the Perforated Drainpipe.   This is to ensure that the Drainpipe does not become clogged.

The dirt that was taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drainpipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drainpipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.
The main downfall of a French Drain is, that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is Ok.  It won’t have a measurable effect on the performance of the drain.
DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.  PUTTING DIRT OVER A FRENCH DRAIN IS LIKE PUTTING A CORK BACK IN A BOTTLE.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

French Drain with colored river rock along foundation

Edmond Oklahoma French Drain Installation

 

OKLAHOMA DRAINAGE AND SPRINKLER REPAIR, Servicing all of Central and Western Oklahoma

405 203 9419

French Drains and Surface Drains

For over 25 years we have solved all types of residential drainage problems.  Water standing on drive ways, Water in basements, water in air ducts, flowerbeds, and even living rooms.

French Drain

French Drains can look great!
French Drains can look great!

Just what is a “French Drain?”  Many times people incorrectly use the phrase, “French Drain,”  to apply to many different types of Drains that could be used in a Drainage System.  The term is widely used and many times incorrectly connected to “Surface Drains,” or “Channel Drains.”

A Surface Drain has a grate that sits on top of a basin.  The basin is underground.  A Drain Pipe is connected underground to an outlet on the Drain Basin.  Storm-Water Drains through the grate into the Drain Basin.  Once in the Drain Basin, water travels out of the basin through a Drain Pipe.  The Storm-Water continues downhill in an underground Drain Pipe to an exit point.

THIS IS NOT A FRENCH DRAIN!

Surface Drain may come in many different shapes or sizes.  The Drain Grate may be round or square.  Here is a picture of a common Surface Drain.

A Channel Drain is a type of Surface Drain and many times is installed in concrete across sidewalks or driveways.

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged.

The dirt that was taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.
The main downfall of a French Drain is, that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is Ok.  It won’t have a measurable effect on the performance of the drain.
DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.  PUTTING DIRT OVER A FRENCH DRAIN IS LIKE PUTTING A CORK BACK IN A BOTTLE.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

 

 

Finished Curb Outlet for French Drain

Finished Curb Outlet for French Drain

 

Installing Solid 4 Inch Drain Pipe Between French Drain and Curb

Installing Solid 4 Inch Drain Pipe Between French Drain and Curb

Oklahoma Drainage and Sprinkler Repair – 405 203-9419

Have you ever had water sanding on your Driveway?  Water on Driveways can cause cement or asphalt to break down and come apart resulting in cracks and deterioration.  Not to mention getting out of your car and stepping into water is never pleasant!

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Surface Drain installed in Driveway with Metal Grate.

Oklahoma Drainage and Sprinkler Repair can help by installing a surface drain in your driveway or sidewalk.  If you live in Edmond and need help, give us a call.  We service all of Central and Western Oklahoma.

We install all types of Residential Drains including : French Drains, Surface Drains, and Channel Drains.

Installing Channel Drain Across Sidewalk in Norman

 

These folks had water standing right at there front door.  Installing a Channel Drain solved the problem.