Oklahoma Drainage and Sprinkler Repair – 405 203 9419

“French Drain Repair Oklahoma City is the most popular key word search for us on Google.  People use this more than any other search criteria to find us.

French Drain Oklahoma City, Surface Drain Installation, Drainage System Installation

Oklahoma Drainage

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, with 30 years of experience. 

Oklahoma Drainage and Sprinkler Repair –  Since 1993 we have provided Expert Sprinkler Repair for Norman, Edmond, and Oklahoma City.

Installing New Sprinkler Controller

FRENCH DRAIN DESIGN

French Drain Design must take into account many variables.  One consideration for a French Drain that many times is missed, is the type of soil.  French Drain Design must take into account the type of soil that the French Drain runs through.  If the soil is “Tight or made up of Clay, A French Drain Liner may not be necessary.

The Gravel or Limestone that is used to fill the French Drain trench may be all that is needed to maintain the integrity of the trench over time.   This means that dirt will not mix in with the French Drain Gravel and clog it up over time.  This is not the case however if your soil is sandy or loose.

The White Material is the Trench Liner. The black material is the Pipe Filter.

A Trench Liner should be used to prevent this type of soil from moving into the gravel of the French Drain.  Trench Liners are relatively inexpensive and are not hard to install.  If you are not sure what to do then install the Trench Liner in the French Drain.

French Drain in Oklahoma City

Determining the size of the French Drainpipe can be difficult.  If the French Drain is not very big and has no Gutter Downspouts or Surface Drains connected to it then 3 inch or 4-inch French Drainpipe may be used.  If the French Drain is large or has many gutters or Surface Drains connected into it, then you should use 6 Inch French Drain Pipe or larger.

WHERE WE HAVE WORKED!

In 1993 we had no website.  I stuck little signs on the side of the road as advertisement.  I got my first Drain Installation work in March of 1993 in Norman.  It was in Brookhaven North of Robinson Street on the West side of I 35.

Over the years Oklahoma Drainage and Sprinkler Repair has installed all types of Drainage Systems in almost Every town in Central and Western Oklahoma.

The majority of our customers live in Oklahoma City, Norman, Edmond, Yukon, Mustang, Moore, Midwest City, Del City, Blanchard, New Castle, Yukon and Choctaw.

Oklahoma Drainage and Sprinkler Repair hasn’t been limited to those areas, however.  We have also installed French Drains, Surface Drains, Channel Drains, and Sump Pumps in many other cities.

Working Drainage Systems Installed by Oklahoma Drainage also reside in: Lawton, Duncan, Ardmore, Chickasha, Shawnee, Enid, Weatherford, Elk City, El reno and many other places.

If you live in any of these Cities or towns, we have installed a French Drain, Surface Drain, Channel Drain, or Sump Pump within 5 miles of your home.

Here is a description of other recent work.

A little bit North of Downtown Oklahoma City, Oklahoma Drainage installed a 6-inch French Drain between two businesses which were less than three feet apart.  The French Drain went between a Law Firm and a Tire shop.  Water was leaking through the walls of both businesses.  Gutters between the two establishments were dumping a huge amount of water.  We installed a 6-inch French Drain between the gutters.

It took a long time to get the dirt out of the trench for the French Drain.  It was a very tight fit.  We had to use a little red wagon to haul out the dirt for the French Drain and haul back in the crushed limestone for the French Drain.  It looked a little silly, but it was the only thing we could find that was narrow enough to fit between the buildings.  A French Drain that normally would take 1 day to install took three.

French Drainpipe Installation

Problem Drainage Area

French Drain Design is also determined by the Problem Drainage Area.  If water is moving into the Problem Drainage Area underground (Sub-Surface), then installing a French Drain is a “Must!”  French Drains can move Sub-Surface water as well as Surface Water.  Surface Drains can only move Surface Water.  This is why French Drains do such a good job protecting driveways, sidewalks, and foundations.

Surface Drain with grate in Oklahoma City

Oklahoma Drainage installs French Drains and Drainage Systems in all of Central Oklahoma including:  Oklahoma City, Norman, Edmond, Moore, Mustang, Yukon, and Midwest City.

French Drain Benefits

French Drain Installation —   French Drains are designed to do a lot of things.  If you have an area that has unwanted water standing in it or running across it, a French Drain can be the answer.  A French Drain is a trench that runs across the Drainage Problem Area.  A French Drain Pipe is placed in the bottom of the trench.  The French Drain Pipe is perforated with thousands of small holes.

In most cases the Drainpipe has a nylon soc around the pipe to act as a filter for the French Drain.  The French Drain trench is then filled with some type of small rock or stone.  We typically uses crushed 1 inch Lime Stone to cover the French Drain Pipe.  The dirt that was dug out of the trench is taken away or spread out around the French Drain.  The Lime Stone replaces the dirt and fills the French Drain Trench all the way to the surface.

Oklahoma Drainage 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

Installing Surface Drain in Driveway

Oklahoma Drainage Recently installed a Drainage System in Nichols Hills.  The Drainage System was made up of a 4-inch French Drain starting in the back yard.  It ran between the garage and the pool.  Several gutters were connected directly into the French Drain.

From this point, we expanded up to a larger 6-inch Drainpipe to handle the added water into the system from the gutters.  In several places the French Drain had to run through areas where Sprinkler Pipes were in the way.  We had to re-rout all the Sprinkler Pipes and Wires under the French Drain.

Oklahoma Drainage — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Servicing all of Central and Western Oklahoma since 1993.

When Installing a French Drain as part of a Drainage System, there are many things to consider.

What is the primary source of water coming into the problem drainage area.

Are there secondary sources of water entering the area.

What are they and how many.

How fast does water enter the area and how often.

What are the potential exit points for the water, Where do we want to take the water too.  Is there more than one potential exit point to increase drainage capacity.

Does the customer want a Drainage System or a Flood Prevention System and does he understand the difference.

Oklahoma Drainage

  recently diagnosed a Drainage Problem in South Oklahoma City.  The Homeowner had a sump Pump in their basement that was fed from a French Drain outside the Basement Wall.  The French Drain was 14 feet down along the Stem wall of the house.

The French Drainpipe was cheap and had collapsed.  We brought in a Mini Excavator and dug up the pipe and replaced it with Durable ADS 4 inch perf/soc French Drainpipe.  In the end, we were able to dig up the pipe and replace it.

New Trench for French Drain

Next, we installed a new exit for the water by installing a curb fitting.

No more flooding in the customers basement.  A few weeks later our customer was able to lay carpet in the basement with no problems.

French Drain Installed Along Stem Wall

Oklahoma Drainage — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Servicing all of Central and Western Oklahoma since 1993.

French Drain Installed in Lawton

French Drain Installation

Oklahoma Drainage and Sprinkler Repair has been diagnosing and solving Drainage Problems since 1993.  Water has the ability to get into places around your home where you really don’t want it to be.  Some drainage problems are easy to solve.  Typically, water enters the problem drainage area one way from one source.

The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

An example of this occurs when water is running into a problem area in an obvious way over the ground where you can see it.

Simple enough.

A Drainage System

is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away and everything looks great.  The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area.  The primary water source was solved, ( The surface water run off ) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.  A surface drain can’t drain “ground water.”

A French Drain should have initially been installed instead of a Surface Drain.

A French Drain Can Handle Standing Water

Drainage System Installation in Norman

Keep water off your driveway with a channel drain

 Standing water comes from many sources.  It causes damage to  sidewalks, driveways, and foundations not to mention plants, trees, and grass.  Does the side of your house flood because your neighbor doesn’t  have gutters, or does your sidewalk turn into a moat after a heavy rain,  or worst of all, is water seeping into your foundation and duct work  after a thunderstorm?  Theses are just a few of the Drainage  Problems that Oklahoma Drainage can help with.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

FRENCH DRAIN CONNECTED TO GUTTERS

Many different types of Drains can be hooked together by one Drainpipe.  The Drainpipe then running to an Exit Point makes up a Drainage System.

One common type of Drain used in a Drainage System is A “French Drain.”  Many times, a French Drain is installed close to a building foundation or in a low area next to a home or business.  This puts the French Drain in close proximity to Gutter Down Spouts.

Rather than have water come off the roof and out the Down Spout and on to the ground below, many times it is much better to tie a Gutter Down Spout Directly into a French Drain or nearby Drainpipe depending on the Drainage System Design.

Connecting The Down Spouts Directly into a French Drain is much more efficient and causes suction to occur in the French Drain.  Connection of Gutter Down Spouts to a French Drain makes the Drainage System work better.

Gutter Down Spout Connected to French Drain

Connecting Gutter to French Drain

French Drainpipe running to curb outlet in Oklahoma City.

French Drains can protect your home and property from water damage.  Oklahoma Drainage and Sprinkler Repair install a wide variety of Drains in many different places.  A Drain or Group of Drains with Drainpipe going to an exit point is a “Drainage System.”

 can be made up of one drain or a combination of many drains.  Drainage problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A Simple Drainage System

might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street. An “Exit Point” is the term used for where all the water leaves the Drainage System.

Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem. Drainage Systems can: 1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving underground) away from the foundation.  Many times less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.

Surface Drain

Also A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be.

One side of a foundation alone, can be over 100 feet.  A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation. 2.  Keep water away from small or enclosed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.

A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.

Pipe Size

How quickly they remove standing water is usually determined by the size of the pipe that is connected to the drain. Simply put, a Drainage System is one or a group of underground Drain Pipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both) A simple Drainage System is a Drain for the water to enter, a Drain Pipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drain Pipe.

Drainage Systems quickly can become more complicated.  Considerations must include: How does the water get to the problem area?  There may be one or many sources.

Water Sources

Water Sources: 1.  Rain falls from the sky directly 2.  Water flows downhill over the surface (surface water) 3.  It flows underground under the surface (sub-surface water) 4.  Water flows from the edge of a roof (There may be many roofs near the problem area, neighbors etc.) 5.  Rain flows from a gutter downspout 6.  Water flows over the edge of a gutter because the gutter is too small is is clogged 7.  Ground water flows up from the ground (seeps and springs are common in Oklahoma) 8.  It flows from a sprinkler system use (yours or your neighbors) 9.  Ground water flows from a leaking pipe (water mains, water meters, water lines, sprinkler pipes, sprinkler valves)

There are other reasons for Drainage Problems, the above reasons are just the most common.

Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.  You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps however.

How Much Water?

How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.  It also helps to determine the size of Drainpipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drainpipe.”

Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water. For home and small business use typical materials used are: 6-inch, 9 inches, and 12-inch Surface Drains – 3 inch, 4 inch, and 6-inch Drainpipes — 3-inch, 4 inches, and 6-inch French Drains —

French Drains move more water than Surface Drains — French Drains move Surface Water and Sub-Surface Water Surface Drains move Surface Water only Surface Drains look nicer than French Drains in most cases Once the type and number of drains is determined and what size Drainpipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?)

The Drainage Curb Outlet

is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drain Pipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.

The Drainage Pop-Up Emitter is connected to the end of a Drainpipe.  It is downhill from a French Drain or a Surface Drain.  It is a small release basin with a green pop-up lid.  When releasing water, it pops up about an inch to release the water from the French Drain or Surface Drain.  When the Storm Water has moved through the Drainage System and out of the Pop-Up Emitter, the green lid closes back to its original closed position.  The emitter is designed to release water out into a yard or down a hill or other desirable Drainage Exit Point where there is no curb.

Drainage System installation and design is a big part of our business.  Does your sidewalk turn into a moat after a hard rain?  Does part of your yard look like a pond after a thunderstorm?  Worst of all, are you experiencing concrete deterioration to your foundation, sidewalk, or driveway. 

Simple or Complex

We can design a Drainage System to solve your Drainage Problems.  Our Drainage Systems can be simple or complex.  We utilize, French Drains, Surface Drains, Channel Drains, Basin Drains, Basement Drains, Trench Drains, and Sump Pumps.  Estimates are free!

Just what is a “French Drain?”  Many times, people incorrectly use the phrase, “French Drain,”  to apply to many different types of Drains that could be used in a Drainage System.   The term is widely used and many times incorrectly connected to “Surface Drains,” or “Channel Drains.”

A Surface Drain has a grate that sits on top of a basin.  The basin is underground.  A Drainpipe is connected underground to an outlet on the Drain Basin. Stormwater Drains through the grate into the Drain Basin.  Once in the Drain Basin, water travels out of the basin through a Drainpipe.  The Stormwater continues downhill in an underground Drainpipe to an exit point.

Types of Drains

A Surface Drain may come in many different shapes or sizes.  It is a Drain Basin with a Drain Grate on top and a Drainpipe connected on the side.  The Drain Grate may be round or square.

A Channel Drain is a type of Surface Drain and many times is installed in concrete across sidewalks or driveways.  It is long and narrow with a grate on top.

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drainpipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged.

French Drain Trench

A trench is dug that is slightly wider than the French Drainpipe that is being used.  There are several sizes.  Three Inch, Four Inch, and Six Inch are the most common sizes of French drainpipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.

I prefer crushed 1 inch limestone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The limestone or gravel is placed in the trench on top of the perforated Drainpipe and filled all the way to the surface (ground level).

Trench Liner

In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drainpipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.

Don’t Cover the Gravel!

French Drain Repair Oklahoma City

French Drain in Oklahoma City

Large 6 Inch French Drain Installed in Norman

When water come in contact with the French Drain, it seeps down through the stones and into the French Drainpipe.  It then flows through the Drainpipe to the exit point.  Typically, a French Drain will have two possible exit points.   The First is called a “Pop-Up Emitter.”  It is a Green Lid on top of a release basin for the French Drain.

Popup Emitter to release water from a Drainage System in Yukon.

Types of Exits

The second type of Exit Point for a French Drain is a “Curb Fitting.”  The Curb Fitting is installed through the curb going out into the street.  The French Drainpipe runs to the Curb.  The curb is cut out, and the Curb Fitting is cemented through the Curb.

Installing a Curb Fitting for a French Drain in Edmond

French Drains are designed to move large amounts of water.  A French Drain moves water away from the Drainage Problem area from the Surface like a large Surface Drain, But also below ground, or sub surface.  Most people don’t take into account the water that flows to a problem area underground.  Sub surface water flow is not eliminated by a Surface Drain.  A French Drain can move away water that is below the surface of the ground and drain away water that is on the surface.