Archive for the ‘drains’ Category

Norman French Drain Help, Sprinkler Repair,Information, Pictures, Service

Posted: April 13, 2023 in drains, french drain, Norman French Drain Contractor, Norman Oklahoma French Drain, sprinkler repair, sprinkler repair contractor
Tags: , , , ,
3

Norman French Drain Help, Information, Pictures, Service

Not Your Average French Drain!

Recently Oklahoma Drainage Installed a Double 4 Inch Horseshoe French Drain on Harrogate Drive in West Norman.

Extreme Flooding

Our customer had extreme flooding in his back yard after every hard rain.  He took video and showed it to us.  His entire back yard looked like a pond about a foot deep.  He was getting water for three neighbors houses. One on the left, One on the right, and the Neighbor directly behind him.

After doing a Drainage Diagnostic we put together a design that would solve his flooding issues.  Our Drainage Design called for a Double 4-inch French Drain.  This is a French Drain that moves more water than a single 4-inch French Drain or even a single 6-inch French Drain.  A Double 4-inch French Drain is two 4-inch Drainpipes laid side by side in the bottom of a wider drainage trench than what is required for a single 4- or 6-inch Pipe.  Two 4-inch pipes become an 8-inch French Drain when placed together in one Drainage Trench.

Installing 4 Inch French Drain with trench Liner and pipe filter

The White Material is the Trench Liner. The black material is the Pipe Filter.

Horseshoe Drain

Next the Drainage System Design called for a “Horseshoe” Application.  This means that there are 2 Exits for the French Drain, one on each side of the house.  The French Drain goes all the way around the house in the shape of a “Horseshoe”.  Water can then Exit the French Drain on the Left side of the house or on the Right side.  Being that there were 2 Four Inch French Drainpipes running all the way around the house, this meant that there would be two curb outlets on the Left Side and two on the Right Side.  Below is a picture.

A Plan

Having our Drainage System Design all planned out, We began Installation.  The length of the French Drain was almost 200 Feet.

Installing The Curb Outlets usually is the last thing we do in completing the Drainage Project.

We had the entire French Drain installed correctly except for the Curb Outlets when the rain started.  Heavy Rain came to Norman before we could finish the last step.

The Double 4-inch French Drain with Horseshoe Design Worked perfectly with the water pouring into the street on both sides through the open pipe.

The next day we installed 2 Curb Outlets one of them being the picture above.

Sprinkler Repair Service

Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Sprinkler System Checkup Norman.

Lots of things can be done to make sure your Sprinkler System is ready to go.  All the Sprinkler Zones should be checked one by one.  The sprinkler heads and valves need to be checked to see if anything needs to be adjusted or replaced.

Sprinkler System Checkup is a Service Provided by Oklahoma Drainage since 1993.

Today we did a sprinkler repair in Norman.  The sprinkler system needed a checkup.

We went through each sprinkler zone and identified several different problems.

Zone 2 had a cracked sprinkler pipe in a flower bed.

A broken Rotor Sprinkler head was found immediately.

Next, zone five look good with no problems.

Zone 6 and 7 each had a couple of pop-up spray heads that were worn out and would not pop-up.  The diagnosis and the repair took less than two hours.  Now their sprinkler system is running great!

Now is a good time to have a Sprinkler System Checkup provided by Oklahoma Drainage.

Sprinkler Systems need to be checked before winter to prevent pipes from freezing.  Sprinkler Design determines whether sprinkler lines need to be bled.  Emergency shut off valves also need to be checked and turned off for the winter.

In the Spring, all the water needs to be turned back on and all sprinkler zones and heads need to be tested.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provide Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Sprinkler Valves

Sprinkler Valve Replacement is a service that Oklahoma Drainage has provided Since 1993.  Recently we removed 3 Rainbird Sprinkler Valves and replaced them with new ones.  The valves had been crushed accidentally when a landscaper drove his truck across the yard.

Sprinkler System Check-Up in Edmond, Oklahoma City, Norman, and Moore.

 

 

Sprinkler System Check-Up process is very straightforward.  We run through all the Sprinkler Zones one-at-a- time from the controller. 

Sprinkler Controller

Sprinkler controllers can be a problem source.   Many times, the wires in the controller are loose or have a “Short” in one of the wires.  Sprinkler Programming can be a source of frustration.  We can help with Programming your controller.

We check all the sprinkler heads in that zone and the valves as well.

Once the Sprinkler System Checkup is Complete, we provide a Quote for what it will cost to make the needed repairs.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.  405 203 9419

Sprinkler Valve Replacement is a service that Oklahoma Drainage has provided Since 1993.  Recently we removed 3 Rainbird Sprinkler Valves and replaced them with new ones.  The valves had been crushed accidentally when a landscaper drove his truck across the yard.

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provide Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

First Step

First, we dug up a good working area surrounding the broken Sprinkler Valves.  Next, we cut out the broken valves and crushed PVC pipes.  Finally, PVC pipe was cut and glued with new Sprinkler Valves following the original design and configuration.  In this case the three original sprinkler valves were connected to each other inside one Valve Box.

We aren’t done yet though; two sprinkler wires must be connected to each Valve.  One sprinkler wire is the “Common Ground.”  The other wire is the power wire.  All the sprinkler wiring is connected with water-proof wire connections.

The Common Ground wire and the Individual Power Wires all come from the Sprinkler Controller.  Each Sprinkler Valve has its own power wire coming from the Controller.  All the Sprinkler Valves are Connected to the Same Common Ground Wire.

Sprinkler Valve Replacement

Oklahoma City Sprinkler Repair

Before We Finish

Before dirt can be put back around the new valves, testing must be done.  Each valve must be turned on, “one-at-a-time,” at the Controller to ensure good wire connection and functionality.  Also, the Sprinkler Valves must be checked for leaks in the PVC Pipe.

Oklahoma Drainage and Sprinkler Repair provides Expert Service for Sprinkler Heads, Valves, Controllers and all other Sprinkler System difficulties.  We service Norman, Edmond, Oklahoma City, Moore, Yukon, Mustang, and Midwest City.

Blanchard Sprinkler Repair has been provided by Oklahoma Drainage and Sprinkler Repair since 1993.

Sprinkler Controller Repair is a service provided by Oklahoma Drainage.  A Sprinkler Controller is the “Brain,” of a Sprinkler System.  They can wear out or stop working.  Power surges in the home can cause damage to a controller.

Programming can be difficult for homeowners.  We can help with programming or replace a Sprinkler Module if it is defective.

Start Time Programming

“Start Time” programing many times is confusing for homeowners.  The definition of a Start Time is a time that is chosen for the sprinkler system to start watering.  It causes zone 1 to start running.  When zone 1 is finished it automatically stops and zone 2 begins.  When Zone 2 is complete it stops and zone 3 begins.  Simple enough Right!  This continues until the last zone programed available runs.

The confusion begins when people think that a time needs to be set to start zone 2 and 3 and so on.  This is not the case.  They follow zone 1 which has the only Start Time programmed into the controller.

Be Careful with Multiple Start Times, just use One at first.

Sprinkler Controllers have a feature providing multiple start times, up to 4 Start Times are usually available.  These additional start times are only used when a person wants to run the entire system more than once in a 24-hour period.

For Example, the first Start Time is set at 9Am.  Zone 1 begins to run at 9am.  When Zone 1 is done, say 10 minutes later, Zone 2 begins and runs for 10 minutes, then zone 3 follows and so on.  By 10 am let’s say all the zones have run.  Let’s say 8 hours later you have a second start time at 6 Pm.  Zone 1 comes on and runs and by 7pm all the zones have run again.  So, the controller has 2 start times which have caused the Sprinkler System to run start to finish twice in a 24-hour period.

Here is the big problem!  Some Homeowners believe the second start time is to start zone 2 running.  They also think that the 3rd start time is to start zone 3 and the 4-start time is to run zone 4.  No!!

So, this is how they program the controller.  At 9am they have a start time and zone 1 starts.  The homeowner programs a second start time at 9:10 am to mistakenly start zone 2.  Nope!  It starts zone 1 all over again.  At 9:2o they have a 3rd start time for zone 3.  Nope!  It starts zone 1 for a third time.  Now the controller is stuck in a loop and zone 1 runs constantly and won’t shut off.

If Sprinkler Controller Programming is confusing?  Make sure you only have One Start Time!

“Run Time,” is completed Next.  It determines how long each zone runs.  Zone One 10 Minutes,     Zone Two, 15 Minutes, Zone Three 8 Minutes.  You can set how long you want each zone to run.

French Drain Repair and Installation is a Central Focus for Oklahoma Drainage.  We installed our first French Drain and completed our first Sprinkler Repair in Norman in 1993.

Sprinkler Head Installation

FRENCH DRAIN PICTURES, OKLAHOMA CITY, CHOCTAW, EDMOND, NORMAN

Posted: June 20, 2020 in drains, french drain, French Drain Information, French Drain Photos
Tags: , , ,
4

FRENCH DRAIN PICTURES

French Drain Success

Oklahoma Drainage and Sprinkler Repair

Recently we installed a French Drain that ran parallel between two houses in Moore Oklahoma.  We also installed a French Drain under a walkway to a pool in Choctaw.

French Drain walk way

French Drain Installed along and under walk way to pool.

As you can see, we installed a French Drain under the left edge of the walk way.  The stones and gravel were temporarily removed while the French Drain was installed. Then the walk way was put back on top of the French Drain.

Finished French Drain

Completed French Drain under walk way

Yesterday it rained very hard on the walkway in Choctaw.  We received a text from the home owner.

text drain

Text and photo of French Drain

 

Before we installed the French Drain, our customer told us that the walk way to the pool typically stood in 6 inches of water after even a small rain.  The water would pool on the right side and stay there for a long time after the rain had gone.  As you can see in the text pic, there is very little water standing while it is raining, and when the rain stopped, the water was gone completely.

Our customer in Moore also sent us a text as well.  He had standing water between his house and his neighbors.  His neighbor did not have any gutters which made the water problem worse.  We installed a French Drain running down the property line between the two houses.  We connected the customer’s gutters directly into the Drainage System with 4 inch gutter connections.  Had the neighbor had gutters, we would have connected them as well.  The French Drain transitioned to a solid drain pipe which ran across the front yard, under the sidewalk to the street.  We cut the curb and installed a curb outlet.

new curb outlet

Curb outlet with more than 6 inches of fall

 

DRAIN TEXT

DRAIN TEXT

French Drain Installation under walkway, Servicing Oklahoma City, Norman, Edmond, Yukon, Choctaw

Posted: June 8, 2020 in drains, french drain, French Drain Photos
Tags: , , ,
9

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

French Drain walkway

French Drain Installation under walkway

 

walk way french drain

Completed French Drain under walk way

Just what is a “French Drain?” Many times people incorrectly

A French Drain can protect your foundation!

use the phrase, “French Drain,” when they mean “Surface Drain” or “Channel Drain.”

surface drain install

Surface Drian

channel drain installation

Channel Drain

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drain Pipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drain Pipe.

French Drain connected to gutter

Perforated French Drain Pipe

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed.

French Drain Gravel

Limestone in French Drain

French Drain 

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations. It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

Colored Gravel over French drain

French Drain with Colored Gravel

The main downfall of a French Drain is that they, for the most part aren’t very pretty. They don’t look very nice in a yard once they are completed.

Drain Pipe for French Drain running under sidewalk

French Drain Pipe under sidewalk

SPRINKLER REPAIR — DRAINAGE SYSTEMS — FRENCH DRAIN — SPRINKLER ADJUSTMENT — SURFACE DRAIN — EMERGENCY SPRINKLER REPAIR —

 

.

French Drain with stepping stones

French Drain With Stepping STones

Oklahoma Drainage and Sprinkler Repair  Services all of Central Oklahoma including: Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

Drainage System Installation in Norman

Drainage System Installation in Norman

 

Do you have Drainage Problems?  Every time it rains, Do you have water standing on your driveway?  Do your gutters turn your sidewalk into a moat?  Does the  side of your house turn into a swamp after a thunder-storm?  Standing  water causes several problems such as dead  grass, sidewalk and foundation deterioration and MOLD to name just a  few.  If you have water seeping into your home things can get even  worse.

Oklahoma Drainage and Sprinkler Repair tackles  these types of Drainage Problems and many other with  the installation of:  FRENCH DRAINS,  SURFACE DRAINS, CHANNEL  DRAINS, BASEMENT DRAINS, TRENCH DRAINS,  BASIN DRAINS, GUTTER DOWNSPOUT  CONNECTS, AND SUMP PUMP INSTALLATION.

can diagnose  your drainage problem and design a drainage system just for your specific needs. 

 

Drains, French Drain Installation, French Drain Repair, Oklahoma City, Norman, Lawton, Edmond –

Posted: January 25, 2020 in Drain Repair, drains, french drain, French Drain Repair
Tags: , , ,
5

Drains, French Drain Installation, French Drain Repair.  These are all areas of Expertise provided by Oklahoma Drainage and Sprinkler Repair.

 

 

new curb outlet

Curb outlet with more than 6 inches of fall

 

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

sump pump cavity install

Sump Pump Drain Cavity installation

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

Oklahoma Drainage and Sprinkler Repair has installed French Drains and Drainage Systems in Central Oklahoma for 32 years.

muddy french drain installation

Installing a French Drain in the mud

Drains can protect your home and property from water damage.   installs a wide variety of Drains in many different places.  A Drain or Group of Drains with Drainpipe going to an exit point is a “Drainage System.”

Drainage System Installation
Drainage System / French Drain Installation
IF YOU NEED WATER DRAINED AWAY FROM YOUR HOME OR BUSINESS CALL OKLAHOMA DRAINAGE AND SPRINKLER REPAIR – 405-203 9419

We install all types of Drainage Systems and French Drains.

French Drain Installation is a primary focus for us.

Just what is a “French Drain?” Many times people incorrectly

A French Drain can protect your foundation!

use the phrase, “French Drain,” when they mean “Surface Drain” or “Channel Drain.”

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drainpipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drainpipe.

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch limestone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well.

The limestone or gravel is placed in the trench on top of the perforated Drainpipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drainpipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed. 

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations. It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Downspouts connected to it.

The main downfall of a French Drain is that they, for the most part isn’t very pretty. They don’t look very nice in a yard once they are completed.

Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the limestone. Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel. This is Ok. It won’t have a measurable effect on the performance of the drain.

6 Inch French Drain

6 Inch French Drain Installation

DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT. THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT. DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together. Many times a French Drain, might be connected to a Surface Drain, which then could be connected to another French Drain.   Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

Cutting The Curb and Installing Curb Fitting With Acrylic Cement
Cutting The Curb for French Drain Outlet

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional French Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a French Drain  which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

Drainage Systems can:

1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving under ground) away from the foundation.  Many times less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.   Also A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.  A Surface Drain also can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If ,”appearance” is more important than Drainage Capacity, Go with the Surface Drain.  Just know what you are getting into and what your expectations should be. One side of a foundation alone, can be over 100 feet.  A 4 inch or 6 inch French Drain is best when protecting a large area such as a foundation.

Surface Drains

2.  Keep water away from small or enclosed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.  A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the pipe that is connected to the drain.

Simply put, a Drainage System is one or a group of underground Drainpipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both) A simple Drainage System is a Drain for the water to enter, a Drainpipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drain Pipe.

Drainage Systems quickly can become more complicated.  Considerations must include:

How does the water get to the problem area?  There may be one or many sources.

Water Sources:

1.  It falls from the sky directly

2.  It flows downhill over the surface (surface water)

3.  It flows underground under the surface (sub-surface water)

4.  It flows from the edge of a roof (There may be many roofs near the problem area, neighbors etc.)

5.  It flows from a gutter downspout

6.  It flows over the edge of a gutter because the gutter is too small is is clogged

7.  It flows up from the ground (seeps and springs are common in Oklahoma)

8.  It flows from a sprinkler system use (yours or your neighbors)

9.  It flows from a leaking pipe (water mains, water meters, water lines, sprinkler pipes, sprinkler valves)

There are other reasons for Drainage Problems, the above reasons are just the most common.

Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.  You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps, however.  How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.  It also helps to determine the size of Drainpipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drain Pipe.”  Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water.

For home and small business use typical materials used are:

6-inch, 9 inch, and 12-inch Surface Drains –

3-inch, 4 inch, and 6-inch Drainpipes —

3-inch, 4 inch, and 6-inch French Drains —

French Drains move more water than Surface Drains —

French Drains move Surface Water and Sub-Surface Water

Surface Drains move Surface Water only

Surface Drains look nicer than French Drains in most cases

Once the type and number of drains is determined and what size Drain Pipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?)

The Drainage Curb Fitting is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drainpipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.

French Drain Installation, Norman, Oklahoma City, Edmond, Lawton, Drain Installation

Posted: February 9, 2011 in Drain Installation, Drain Repair, Drainage Problems, drains, french drain, French Drain Repair
Tags: , , ,
30

Oklahoma Drainage and Sprinkler Repair — 405 203 9419

FRENCH DRAIN, SURFACE DRAIN PHOTOS AND INFORMATION

 

 Standing water can cause many types of property damage ranging from foundation problems to cracked sidewalks and dead plants and shrubs.  If you have need of French Drain or Surface Drain, give us a  call.  We provide free estimates for all of central Oklahoma.

French Drain With Colored Gravel in Oklahoma City

French Drain With Colored Gravel in Oklahoma City

 

Installing Cement around Curb Fitting for French Drain in Norman

Installing Cement around Curb Fitting for French Drain in Norman

Some Drainage Systems are complex and incorporate several types of drains.  Most Drainage Systems , however are basic and require just one type of Drain.  Oklahoma Drainage and Sprinkler Repair installs a variety of drains to solve a variety of problems. French Drains, Surface Drains, and Channel Drains are most commonly used.  If you live in Edmond and need a Channel Drain installed across your driveway, or if you live in Norman and need a French Drain in your backyard, or if you live in Oklahoma City and need a Surface drain installed next to your sidewalk, we can help.

Channel Drain Installed by CMG In Yukon

Channel Drain Installed In Yukon

Channel Drains are one kind of Surface Drain that we install in concrete.

The most common Drain that we install is the French Drain.  This is because the French Drain is versatile.  It can handle Surface Water Problems or Underground Water Problems (sub-surface).  A huge mistake that many people make is assuming that water gets to a Problem Drainage Area by flowing over the surface only.  For example, if water is flowing down hill underground toward your home’s foundation, the only way to stop or intercept it is with a French Drain.  Water can flow laterally into a perforated French Drain Pipe.  It is then diverted away from the Problem Drainage Area to an Exit Point.

Popup Emitter to release water from a French Drain in Yukon

Popup Emitter to release water from a French Drain in Yukon

Pop Up Emitters can release water from Surface Drains or French Drains.  They can release water on to sidewalks or driveways, or out in the middle of yards.

A  French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

 

 

Pipe running to street form French Drain in back yard.

Pipe running to street form French Drain in back yard.

When we run Drain Pipe across yards to an Exit Point, the sod usually can be put back into place and in a few days you can’t tell a French Drain was ever Installed.
A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.
The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is OK.  It won’t have a measurable effect on the performance of the French Drain.  In some cases thick grass growing up through the French Drain will create a natural “Thatch” filter.  This makes the French Drain invisible.  The trick is to allow the grass to grow over the French Drain Gravel without covering it up with dirt.  Grasses such as Bermuda which grow well in the sun will put out runners and new roots and will grow up and through the French Drain.  This will not affect the performance of the French Drain.  The problem is that some times depending on the type of soil involved, it may take a long time to completely cover up the French Drain.  Sprinkling grass seed down in the gravel will speed up the process.

DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.   

If you install a French Drain in a sunny area, you can:
                                         A.  Leave the  French Drain as-is and allow grass to grow over it in time.
                                         B.  Add grass seed directly to the French Drain gravel with (Light Hand Watering) to speed the growth process
                                         C.  Leave the French Drain as-is but decorate it with stepping stones and landscaping rocks ( leaving large cracks between stones to allow water to get into the French Drain,
2
If you install a French Drain in a shady area you can:
                                        A.  Leave the French Drain as-is, it will work well and look as it did for many years.

                                        B.  Leave the French Drain as-is, but decorate it with stepping stones or landscaping rocks.  Many French Drains are hidden under rock walk ways.

Sometimes Surface Drains make more sense when the Drainage Problem area is fairly small with Surface Water Flowing into it.

 

French Drain with stepping stones

French Drain with stepping stones

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.