Channel Drain Installation Is a Central Focus for Oklahoma Drainage. We have been Installing Channel Drains set in Concrete since 1993.
Channel Drain Set in Concrete
Channel Drains can look great and be very functional and durable.
However, A Channel Drain is not an easy thing to install! It takes a great deal of precision, Experience, and Attention to Detail. This is Definitely Not something to allow your Landscape Company to attempt, or your Brother-In-Law!
Just because someone is skilled at pushing a mower around, doesn’t mean you should let them cut across your driveway with a concrete saw.
I get a lot of business fixing and replacing Drains of all types that were installed incorrectly by landscape companies and armatures. Typically, they stick to messing up French Drains, but I have fixed Channel Drains that were an absolute “Train Wreck!” as well.
Oklahoma Drainage 405 203 9419
French Drain Installation, Channel Drain Installation Surface Drain Installation, Drainage System Installation,
WHERE WE HAVE WORKED!
In 1993 we had no website. I stuck little signs on the side of the road as advertisement. I got my first Drain Installation work in March of 1993 in Norman. It was in Brookhaven North of Robinson Street on the West side of I 35.
Over the years Oklahoma Drainage and Sprinkler Repair has installed all types of Drainage Systems in almost Every town in Central and Western Oklahoma.
The majority of our customers live in Oklahoma City, Norman, Edmond, Yukon, Mustang, Moore, Midwest City, Del City, Blanchard, New Castle, Yukon and Choctaw.
Oklahoma Drainage and Sprinkler Repair hasn’t been limited to those areas, however. We have also installed French Drains, Surface Drains, Channel Drains, and Sump Pumps in many other cities.
Working Drainage Systems Installed by Oklahoma Drainage also reside in: Lawton, Duncan, Ardmore, Chickasha, Shawnee, Enid, Weatherford, Elk City, El reno and many other places.
If you live in any of these Cities or towns, we have installed a French Drain, Surface Drain, Channel Drain, or Sump Pump within 5 miles of your home.
Trench Liner and Pipe Filter Installed with French Drain
Here is a description of other recent work.
A little bit North of Downtown Oklahoma City, Oklahoma Drainage installed a 6-inch French Drain between two businesses which were less than three feet apart. The French Drain went between a Law Firm and a Tire shop. Water was leaking through the walls of both businesses. Gutters between the two establishments were dumping a huge amount of water. We installed a 6-inch French Drain between the gutters.
It took a long time to get the dirt out of the trench for the French Drain. It was a very tight fit. We had to use a little red wagon to haul out the dirt for the French Drain and haul back in the crushed limestone for the French Drain. It looked a little silly, but it was the only thing we could find that was narrow enough to fit between the buildings. A French Drain that normally would take 1 day to install took three.
Sprinkler Repair
Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair
Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.
Thousands of Sprinkler Heads have been adjusted.
Countless Sprinkler Controllers have been Reprogramed or Replaced.
We also have fixed a broken Sprinkler Pipe or Two. Seems like a million. Ok, not that many.
I wonder how many? A lot!!!!
Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including: Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.
Sometimes things go wrong with sprinkler systems.
IF YOU NEED HELP IN THE MIDDLE OF THE NIGHT OR ON A WEEKEND WITH YOUR SPRINKLER SYSTEM, GIVE US A CALL.
OKLAHOMA DRAINAGE AND SPRINKLER REPAIR. 405 203 9419
IT MAY TAKE A FEW HOURS FOR US TO GET THERE BUT WE WILL COME TO HELP.
One Common problem is that they continue to run and won’t shut off. In most cases this is a problem with a sprinkler valve that has “Stuck” in the on position.
This can be temporarily solved by shutting of the Emergency Shutoff Valve. The problem is that some sprinkler systems don’t have one to turn off or if they do the homeowner doesn’t know where it is.
It may be on the back-flow valve which may be located on the side of the house under a big plastic fake rock.
Many sprinkler systems in Oklahoma have them. (50 % ?) Under the plastic rock is a back-flow valve with two shut off handles. Usually, they have blue or green or tan handles. Turn one of the handles and it should shut off the water to your sprinkler system.
Other times the Emergency Shutoff Valve is in a box in the ground out by the curb near your water meter. The valve box will have a green lid. Sometimes they are difficult to open. Many times, I had to pry them open with a flat head screwdriver.
Inside the valve box is a plastic handle that can turn off the water to the sprinkler system. It can be blue or red or grey in color.
Many times, the valve box will be full of dirt, and you can’t turn or even see the handle until some of the dirt has been dug out by hand.
Water might be shooting up in the air somewhere on your property. This can be caused by a broken sprinkler pipe or sprinkler valve.
SHUT OFF THE SPRINKLER WATER IF YOU CAN AND GIVE US A CALL.
OKLAHOMA DRAINAGE AND SPRINKLER REPAIR. SERVICING ALL OF CENTRAL AND WESTERN OKLAHOMA.
405 203 9419
Servicing Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma
French Drain Design must take into account many variables. One consideration for a French Drain is Soil Type. French Drain Design must take into account the type of soil that the French Drain runs through. If the soil is “Tight or made up of Clay, A French Drain Liner may not be necessary.
When a French Drain, Is Installed in sandy soil, A Trench Liner is always needed. As a result the French Drain Gravel stays clean.
The Gravel or Limestone that is used to fill the French Drain trench may be all that is needed to maintain the integrity of the trench over time. This means that dirt will not mix in with the French Drain Gravel and clog it up over time. This is not the case however if your soil is sandy or loose.
A Trench Liner should be used to prevent this type of soil from moving into the gravel of the French Drain. Trench Liners are relatively inexpensive and are not hard to install. If you are not sure what to do then install the Trench Liner in the French Drain.
Norman Oklahoma French Drain Installation, Water in Floor Vents and Duct Work.
Recently we installed a 4-inch French Drain with Trench Liner and Pipe Filter in West Norman on Harrogate Street. Our customer had a heavy water build up area on the side of her house. Water would pool up during a rain and sink down into her flower bed. Once the slab and foundation of the house got very wet, the water would seep into the floor ducts for their Central Heat and Air unit. This is bad for several reasons.
A wet foundation causes deterioration of the cement. Cracks can occur leading to all sorts of other problems.
Water In your floor vents promotes mold and all the problems that come with that as well.
Oklahoma Drainage Installed 4 Inch French Drain with trench liner and pipe filter about one foot away from the wall where all the water was standing and penetrating the Duct Work. The French Drain ran parallel to the house for 60 Feet. At that point the French Drain transitioned to 4 Inch solid ADS Drain Pipe and continued South an additional 80 feet to a Curb Outlet installed at the street.
Curb Outlet
We cut the curb and installed a Curb Outlet With Acrylic Concrete to make it look nice and last without chipping.
Along the course of the French Drain, we also connected 2 Gutter Down Spouts Directly into the French Drain..
This provides more efficient movement of the storm water to the exit, but also creates suction in the French Drain behind it.
This is called the “Bernoulli Effect.” If you remember your High School Science Class.
Oklahoma Drainage has used these simple concepts many times to provide a solution to the above problem.
Water still had to be vacuumed out of the Duct Work. But Future water was and is kept out of the Duct Work and Floor Vents. Also, the Foundation Stays Dry. No mold or foundation Break Down.
Trench Liner and Pipe Filter
Determining the size of the French Drain Pipe can be difficult. If the French Drain is not very big and has no Gutter Down-Spouts or Surface Drains connected to it then 3 inch or 4 inch French Drain Pipe may be used. If the French Drain is large or has many gutters or Surface Drains connected into it, then you should use 6 Inch French Drain Pipe or larger.
