Posts Tagged ‘Edmond Oklahoma French Drain’

French Drain, Surface Drain, Drainage System, Oklahoma City, Norman, Edmond

Posted: October 2, 2014 in french drain, French Drain Design, French Drain Information
Tags: , , ,
3

FRENCH DRAIN, SURFACE DRAIN, DRAINAGE SYSTEM, OKLAHOMA CITY, NORMAN, EDMOND

 

Oklahoma Drainage 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

Hard rain in Oklahoma is common.  Many homes and businesses have drainage problems. Standing water from storm water run-off  can cause damage to grass, trees and shrubs, not to mention foundations, sidewalks and driveways. Oklahoma Drainage   can design and install a drainage system that may be complex using several types of drains, or basic using just a French Drain or a Surface Drain.  It depends on the customer’s needs.

 

Today we installed a Channel Drain.   It takes a lot of attention to detail.  Channel Drain installation takes several specific steps.  It is a slow process that takes confidence and experience.  I was able to train a couple of our guys on the complete process.  They learned a lot but are nowhere near ready to solo yet.

Installing Channel Drain Across Sidewalk in Norman

Installing Channel Drain Across Sidewalk in Norman

If you live in Central Oklahoma and need a French Drain to protect your home’s foundation, Give us a call.  A French Drain is a great way to keep water away from cement such as a home foundation or driveway.  When water is left standing near a driveway or sidewalk, it can cause deterioration and cracking.  A French Drain is a Good way to keep water away from problem drainage areas.  We also install Surface Drains of most types and sizes depending on our customer’s needs.

Surface Drain Installation in Edmond

Surface Drain Installation in Edmond

We can schedule a free estimate for a drainage system.  A French Drain can be an important part of a Drainage System.  A Drainage System is one or several types of drains connected to an exit point, were the unwanted water is to be released.   A French Drain may be connected to a Surface Drain which in turn may be connected to a gutter down-spout, or Channel Drain.  All the different drains are connected under ground by drain pipe to a Pop-Up Emitter or a Curb fitting to release the water.

What goes into a Drainage System depends on the individual Drainage Problem.  Some Drainage Problems are Simple and need only one type of Drain Connected to an exit point.  Other Drainage problems require  a more complex solution.

 

Oklahoma City Drainage System, French Drain, Edmond, Norman, Oklahoma City

Posted: October 1, 2014 in french drain, French Drain Photos, French Drain Problems, French Drain Repair
Tags: , ,
5

Oklahoma City Drainage System. French Drain, Edmond, Norman, Oklahoma City

Oklahoma Drainage 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

 OKLAHOMA CITY FRENCH DRAIN

 

 

We Install French Drains by themselves and as a part of Drainage Systems to protect Driveways, Sidewalks, Foundations all over Edmond.  French Drains may be installed in Flower Beds or grassy areas too.  French Drains when installed correctly can provide many years of property protection and Piece of Mind.

Understanding why a French Drain should be installed over a Surface Drain in particular situations is just one of many variables that must be considered when Diagnosing a Drainage Problem.

Many times, we are asked to look at Drainage Systems that aren’t working correctly.

 Here are a few common problems that we find:

French Drainpipe is too small for the Drainage Area.

French Drain is not connected to an Exit Point.

French Drain is installed where a Surface Drain is needed.

Surface Drain is installed where a French Drain is needed.

Too many gutters connected to French Drain.

French Drain covered with dirt.

Exit Point Covered with Dirt.

Water flow is bad for French Drain, (trying to drain water up hill)

These are just a few of the Problems we are asked to solve when fixing a Drainage System that wasn’t designed correctly.

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

Cutting The Curb and Installing Curb Fitting With Acrylic Cement

Cutting The Curb and Installing Curb Fitting With Acrylic Cement

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A Simple Drainage System

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

Curb Outlet as an Exit Point for a French Drain in Edmond

Curb Outlet as an Exit Point for a French Drain in Edmond

Drainage Systems can:

1.  Keep water away from foundations — A French Drain is best because it can move Surface Water and Sub-Surface Water (water moving underground) away from the foundation.  Many times, less experienced companies install Surface Drains to keep water away from foundations.  This can be a big mistake.  A Surface Drain can’t move or drain Sub-Surface Water.   Also, A Surface Drain often can’t move enough water fast enough and easily becomes overwhelmed during a heavy rain.

A Surface Drain Can’t

A Surface Drain can’t cover or protect a broad enough area. Surface Drains should be designed in a Drainage System to be located in smaller Drainage Areas moving moderate amounts of water.  Surface Drains look better than French Drains.  If, “appearance” is more important than Drainage Capacity, Go with the Surface Drain.

Just know what you are getting into and what your expectations should be. One side of a foundation alone, can be over 100 feet.  A 4 inch or 6-inch French Drain is best when protecting a large area such as a foundation.

2.  Keep water away from small or in closed areas.  This might be a low area just through a gate on the side of a house, or the low area between a flowerbed and the wall of a house or standing water on or near a sidewalk or driveway.  These types of Drainage Problems are best served with Surface Drains.

A Surface Drain Can

A Surface Drain can move water away from a low area that is relatively small.  This can occur in yards, flowerbeds, sidewalks and driveways.  A surface Drain is designed to move Surface Water away from a problem area to a predetermined exit point.  Surface Drains are available in many sizes.  How quickly they remove standing water is usually determined by the size of the pipe that is connected to the drain.

Drainage System

Simply put, a Drainage System is one or a group of underground Drainpipes that take water away from a place that has water standing on it or flowing across it.  The water that is in the problem area, can be causing damage or may be inconvenient or both.  (Usually Both)

A simple Drainage System is a Drain for the water to enter, a Drainpipe to move the water away from the Drain, and an Exit Point for the water to be released out of the Drainpipe.

Drain Grates Installed in Edmond Driveway

Drain Grates Installed in Edmond Driveway

Drainage Systems quickly can become more complicated.

Considerations must include:

How does the water get to the problem area?  There may be one or many sources.

Water Sources:

1.  It falls from the sky directly

2.  It flows downhill over the surface (surface water)

3.  It flows underground under the surface (sub-surface water)

4.  It flows from the edge of a roof ( There may be many roofs near the problem area, neighbors etc.)

5.  It flows from a gutter downspout

6.  It flows over the edge of a gutter because the gutter is too small or clogged

7.  It flows up from the ground (seeps and springs are common in Oklahoma)

8.  It flows from a sprinkler system use ( yours or your neighbors)

9.  It flows from a leaking pipe (water mains, water meters, water lines, sprinkler pipes, sprinkler valves)

There are other reasons for Drainage Problems, the above reasons are just the most common.

Once the number of water sources is determined, a rough estimate of the amount of water that needs to be drained away on average must be estimated.  This can be simplified down to “SMALL, MEDIUM, OR LARGE AMOUNTS OF WATER TO BE DRAINED AWAY.

Diagnosing Drainage Problems

You don’t have to be an engineer trying to calculate fluid dynamics.  Experience at diagnosing drainage problems helps however.  How much water needs to be moved will help determine the type and size of the Surface Drain or French Drain that needs to be installed.

It also helps to determine the size of Drainpipe required for the Drainage System.  A good rule to follow is, “If in doubt, install a larger Drain and Drainpipe.”  Unused Drainage Capacity is better than property damage caused by a Drain that is overwhelmed by too much water.

 Typical materials used are:

6 inch, 9 inch, and 12 inch Surface Drains –

3 inch, 4 inch, and 6 inch Drainpipes —

3 inch, 4 inch, and 6 inch French Drains —

French Drains move more water than Surface Drains —

French Drains move Surface Water and Sub-Surface Water

Surface Drains move Surface Water only

Surface Drains look nicer than French Drains in most cases

Once the type and number of drains is determined and what size Drainpipe will connect them, an exit point must be selected.  (Where is the Drainage System going to take the water to and release it?)

curb cut

curb outlet

The Drainage Curb Fitting

is installed when the desired exit point for the French Drain will release the Drainage Water into the Street.   The Drainage Curb Fitting is rectangular in shape and made to be installed through the curb.  A small section of Curb is cut out with a concrete saw.  The Section is a few inches wider than the Drainage Curb Fitting.  We then install new concrete around the curb fitting.  Once the concrete has dried, the Drainpipe coming from a French Drain or Surface Drain is connected to the Drainage Curb fitting and then covered with dirt.

 

 

 

Edmond Oklahoma French Drain, Oklahoma City, Moore, Yukon

Posted: September 28, 2014 in Edmond Oklahoma French Drain, Edmond Oklahoma French Drain Information, french drain, Moore Oklahoma French Drain, Oklahoma City French Drain
Tags: , , ,
4

 

Edmond Oklahoma French Drain Information is a Central Focus for Oklahoma Drainage.  We service all of Central and Western Oklahoma.

Check Out French Drains Installed in Edmond Oklahoma!

Since 1993, Oklahoma Drainage has installed over 1200 Drains in the city limits of Edmond.

Some Simple rules about French Drains and Surface Drains.  A French Drain should be installed when there is a large volume of water to be drained over a large area.  Surface Drains are needed when the water volume is smaller, and the Drainage Area is small and focused.  French Drains move away Surface Water and Sub-Surface water.  Surface Drains move only surface water.

Oklahoma Drainage provides top quality Sprinkler Repair Service.  If you live in Oklahoma City and need a Sprinkler Head moved, we can help.  You might have a Sprinkler Pipe leak that needs attention.  A Sprinkler Valve might we wore out as well.  You might just want a Sprinkler System Checkup for Spring.  For these problems and many others, Oklahoma Drainage can help.

We service Oklahoma City, Norman, Edmond and all of Central and Western Oklahoma.

 

Edmond Oklahoma French Drain Installation, French Drain Repair

Edmond Oklahoma has been the location for many French Drain Installations for Oklahoma Drainage in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water. 


 The First step was to take out part of the deck along the wall.  Next, we took out the Surface Drain and the Three Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, “Fall” to make sure the water would run from left to right. 

As Seen above, we also install Channel Drains.
French Drain Installation Next to Wall

French Drain Installation Next to Wall, Installing Trench Liner


 Next a French Drain Liner needed to be installed.  This w

Edmond Oklahoma French Drain Installation is a focus for Oklahoma Drainage.  We service all of Central and Western Oklahoma.  We install French Drains, Surface Drains, Channel Drains and Sump Pumps.  Expert Sprinkler Repair and Sod Installation is also provided.

Oklahoma Drainage – 405 203 9419

 

 

Edmond has lots of Hills

Edmond is one of the communities in Central Oklahoma that we service.  Oklahoma Drainage and Sprinkler Repair has installed almost a thousand French Drains in the Edmond community in the past30 years.

The community has many hills and valleys and as a result, Many Neighborhoods are built on hillsides.  This causes many Drainage Problems.

We have installed French Drains by themselves and as a part of Drainage Systems to protect Driveways, Sidewalks, Foundations all over Edmond.  French Drains may be installed in Flower Beds or grassy areas too.  French Drains when installed correctly can provide many years of property protection and Piece of Mind.

 

 

Curb Outlet for French Drain in Edmond Oklahoma

Curb Outlet for French Drain in Edmond Oklahoma

 

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

 

Curb outlet for a French Drain in Edmond

Curb outlet for a French Drain

 

 

French Drain connected to gutter down spouts, Oklahoma City French Drain Repair

Posted: September 27, 2014 in french drain, French Drain Design, French Drain Repair
Tags: , , , ,
7

French Drain Connected to Gutter.  Oklahoma Drainage and Sprinkler Repair connect gutters to French Drains where possible.

Oklahoma Drainage– We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water damaging your foundation, we can install a French Drain for you.  Quotes are Free.

If you live in Norman and have water standing on your driveway, we can install a Channel Drain for you.  Quotes are Free.

If you live in Edmond and have water flooding your basement, we can install a Sump Pump for you.  Quotes are Free.

If you live in Moore and have water washing out your flower bed mulch, we can install a Surface Drain for you.  Quotes are still free.

If you live in Yukon and need grass to grow, we can install Sod too!

Servicing All of Central and Western Oklahoma Since 1993.

FRENCH DRAIN CONNECTED TO GUTTERS

Many different types of Drains can be hooked together by one Drainpipe.  The Drainpipe then running to an Exit Point makes up a Drainage System.

One common type of Drain used in a Drainage System is A “French Drain.”

Many times, a French Drain is installed close to a building foundation or in a low area next to a home or business.  This puts the French Drain in close proximity to Gutter Down Spouts.

Connecting Gutter to french Drain

Connecting Gutter to French Drain

Rather than have water come off the roof and out the Down Spout and on to the ground below, many times it is much better to tie a Gutter Down Spout Directly into a French Drain or nearby Drainpipe depending on the Drainage System Design.

Gutter Downspouts

Connecting The Down Spouts Directly into a French Drain is much more efficient and causes suction to occur in the French Drain.  Connection of Gutter Down Spouts to a French Drain makes the Drainage System work better.

Connecting Gutter into French Drain System

Connecting Gutter into French Drain System

 

 

 

One Problem with connecting Gutter Down Spouts into a French Drain is overwhelming the Drainage System with too much water.

Three Gutter Down Spouts is usually OK to connect into a French Drain.  More than 3 Down Spouts can be too many.

The Drainage System Design should also take into account the size of the French Drain and the Gutters.  If you have a large long French Drain or over-sized gutters, the number of Gutter Down Spouts connected into the French Drain Should be reduced.  This problem can usually be solved by increasing the size of the French Drainpipe.  This usually means moving up from a 4-inch French Drainpipe to a 6-inch French Drainpipe.  Four inch is the most common size of French Drainpipe.  If you have more than 3 gutters Down Spouts to connect, you should move up to a 6 inch French Drainpipe.

Gutter connected straight into 6 inch French Drain System

Gutter connected straight into 6-inch French Drain System

French Drain Moore Oklahoma, Oklahoma City Sprinkler Repair, Norman, Edmond

Posted: September 24, 2014 in Drainage Systems, french drain, Moore Oklahoma French Drain, Oklahoma City Sprinkler Repair
Tags: , , , ,
27

French Drain Moore Oklahoma.  Oklahoma Drainage and Sprinkler Repair has provided Installation and Service since 1993.  Servicing all of Central and Western Oklahoma

French Drain as Part of a Drainage System, Oklahoma City, Norman, Edmond

Oklahoma Drainage  and Sprinkler Repair, 405 203 9419

Our Drainage Systems utilize French Drains, Surface Drains, Channel Drains, and Sump Pumps.   With over 32 years of experience, we provide top quality French Drains, Drainage Systems, and Sprinkler Repair.

Trench For a French Drain

A Drainage System has 3 basic parts.  They are the:  1.  Intake Point,  2.  Transition Stage,  3.  The Exit Point

 

The, ” Intake’ part of a Drainage System is usually located in the ,”Problem Drainage Area” at it lowest point.  This is where water is taken into the Drainage System through some type of Drain or Gutter.  A French Drain or a Surface Drain are the two most common intake Drains.

A French Drain is a trench that runs through the Problem Drainage Area.  The French Drain Trench usually runs one or two feet deep but can be deeper or more shallow depending on the need.  In most cases a trench liner is placed in the trench.  This is necessary to maintain the integrity of the French Drain Trench.  A perforated French Drainpipe is placed on top of  the liner and runs to the, “Transitions Stage.”

Installing Gravel on top of a 6 inch French Drain

Installing Gravel on top of a 6-inch French Drain

A Surface Drain is also used as an Intake point.  A Surface Drain is a basin with a square or round grate on top.  The Drain Pipe that is connected to the Surface Drain or French Drain begins the Transition stage.  Simply put, for water to get into a Drainage System, it must pass through either a French Drain or a Surface Drain.

Large Amounts of Water

A French Drain is designed to handle large amounts of water over a large area.  A Surface Drain is designed to handle smaller amounts or water that is more centralized in a smaller area.

A French Drain takes in Surface Water and Sub-Surface Water (water flowing underground).  A Surface Drain can only take in Surface Water on top of the ground.

The Transition Stage is where water travels out of the French Drain or Surface Drain and into a Solid Drainpipe.  The Solid Drain Pipe takes the water to an Exit point or another Problem Drainage Area.  Several French Drains or Surface Drains can be connected in any combination.  This is determined by the needs of the next Problem Drainage Area that is farther down the hill.

Limiting Factor

The limiting factor is the size of the Drainpipe between Drains.

The greater the number of Drains that are connected together, the larger the Solid Drainpipe must be between them.

Surface Drains induct small amounts of water into the Drainage System.  If you have a large 6 inch Drainpipe, many Surface Drains can be connected together on their way to the exit point.  French Drains Take In larger amounts of water faster.  As a result, only a Few French Drains can be connected together on their way to the exit point.  French Drains and Surface Drains can also be connected together by one Drainpipe.

 

Installing Cement around Curb Fitting for French Drain

Installing Cement around Curb Fitting for French Drain

 
Once water leaves the French Drain or Surface Drain, it runs through the solid Drainpipe (The Transitions) to the Exit Point.  
 
Water is released through two types of Exit Points.  They are the Pop-Up Emitter and the Curb Fitting.  A Pop-Up Emitter can be in any good open area.  A Curb Fitting is installed through the curb and requires Wet Cement to install it.
Popup Emitter to release water from a French Drain in Yukon

Popup Emitter to release water from a French Drain in Yukon

 

French Drain Repair Edmond Oklahoma, Drainage System Installation, Oklahoma City, Norman, Altus, Lawton

Posted: September 16, 2014 in Edmond Oklahoma French Drain, french drain, French Drain Contractor, French Drain Repair Edmond
Tags: , ,
52

 French Drain Repair Edmond

FRENCH DRAIN IN EDMOND OKLAHOMA, 

Oklahoma Drainage – French Drain Installation, Drainage System Design, 

Recently Oklahoma Drainage installed a large 6-inch French Drain in Edmond.  The customer had water running under his back porch step and into his basement.  We did a Free Drainage Diagnostic and Estimate.

The French Drain design that we proposed would intercept the surface water and subsurface water that was flowing under the steps.  The French Drain design called for a 6 inch French Drain to be installed above and several feet away from the steps.  It would run around the house parallel to the foundation and about 5 feet to the East.

The French Drain would run past the steps to a point where water must cross the French Drain or run up hill to the steps which in this case was not possible.  Once past the steps, the French Drain would transition to Solid 6 inch Drain Pipe and continue on around the house to the Pop-Up Emitter down hill in the side yard.  Along the way we attached several Gutter Down Spouts into the French Drain.

 

WHERE WE HAVE WORKED!

In 1993 we had no website.  I stuck little signs on the side of the road as advertisement.  I got my first Drain Installation work in March of 1993 in Norman.  It was in Brookhaven North of Robinson Street on the West side of I 35.

Over the years Oklahoma Drainage and Sprinkler Repair has installed all types of Drainage Systems in almost Every town in Central and Western Oklahoma.

The majority of our customers live in Oklahoma City, Norman, Edmond, Yukon, Mustang, Moore, Midwest City, Del City, Blanchard, New Castle, Yukon and Choctaw.

Oklahoma Drainage and Sprinkler Repair hasn’t been limited to those areas, however.  We have also installed French Drains, Surface Drains, Channel Drains, and Sump Pumps in many other cities.

Working Drainage Systems Installed by Oklahoma Drainage also reside in: Lawton, Duncan, Ardmore, Chickasha, Shawnee, Enid, Weatherford, Elk City, El reno and many other places.

If you live in any of these Cities or towns, we have installed a French Drain, Surface Drain, Channel Drain, or Sump Pump within 5 miles of your home.

Here is a description of other recent work.

A little bit North of Downtown Oklahoma City, Oklahoma Drainage installed a 6-inch French Drain between two businesses which were less than three feet apart.  The French Drain went between a Law Firm and a Tire shop.  Water was leaking through the walls of both businesses.  Gutters between the two establishments were dumping a huge amount of water.  We installed a 6-inch French Drain between the gutters.

It took a long time to get the dirt out of the trench for the French Drain.  It was a very tight fit.  We had to use a little red wagon to haul out the dirt for the French Drain and haul back in the crushed limestone for the French Drain.  It looked a little silly, but it was the only thing we could find that was narrow enough to fit between the buildings.  A French Drain that normally would take 1 day to install took three.

Oklahoma Drainage and Sprinkler Repair has been installing French Drains in Newcastle since 1993.  We have helped over 4000 customers in Central and Western Oklahoma.
We install: French Drains, Surface Drains, Channel Drains and Sump Pumps.  Sprinkler Repair and Sod Installation are Also Available.

 

Curb Outlet for French Drain in Edmond

Curb Outlet for French Drain in Edmond

Oklahoma Drainage — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Servicing all of Central and Western Oklahoma since 1993.

French Drain Installation

Oklahoma Drainage and Sprinkler Repair has been diagnosing and solving Drainage Problems since 1993.  Water has the ability to get into places around your home where you really don’t want it to be.

Some drainage problems are easy to solve.  Typically, water enters the problem drainage area one way from one source.  The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

An example of this occurs when water is running into a problem area in an obvious way over the ground where you can see it.

Simple enough.

A drainage system is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away, and everything looks great.

The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area.

The primary water source was solved, (The surface water run off) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.  A surface drain can’t drain “ground water.”  A French Drain should have initially been installed instead of a Surface Drain.  A French Drain can drain both Surface Water and Ground Water.

 

A French Drain Can Handle Standing Water

 

Oklahoma Drainage and Sprinkler Repair

Services all of Central Oklahoma including Norman, Moore, Edmond, Yukon, Mustang, Oklahoma City, Midwest City, Del City, Blanchard, Newcastle, Purcell and Chickasha.

 

 

 

 

Keep water off your driveway with a channel drain

 Standing water comes from many sources.  It causes damage to sidewalks, driveways, and foundations not to mention plants, trees, and grass. 

Does the side of your house flood because your neighbor doesn’t have gutters, or does your sidewalk turn into a moat after a heavy rain, or worst of all, is water seeping into your foundation and duct work after a thunderstorm? 

These are just a few of the Drainage Problems that Oklahoma Drainage and Sprinkler Repair can help with.  We can design a Drainage System to fit your specific needs. 

We install many types of Drains to solve many types of problems.    French Drains, Surface Drains, Channel Drains, Basement Drains, Trench Drains, Basin Drains, and Sump Pumps are utilized.

 

 

4 Inch Drain Pipe Ready to be covered with dirt in Norman.
4 Inch Drainpipe Ready to be covered with dirt in Norman.
Running French Drain Pipe Under Sidewalk

Running French Drainpipe Under Sidewalk

Oklahoma City Drains, French Drain, Sprinkler Repair, Surface Drain, Channel Drain, Edmond, Yukon, Lawton

Posted: September 15, 2014 in Drain Repair, french drain, French Drain Repair, Oklahoma City French Drain, sprinkler repair
Tags: , , , ,
18

Oklahoma City Drains, French Drains, Surface Drains, Channel Drains.  If you have water in a place that it is not wanted, we can help!

Oklahoma Drainage – We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water damaging your foundation, we can install a French Drain for you.

Or if you live in Norman and have water standing on your driveway, we can install a Channel Drain for you.

If you live in Edmond and have water flooding your basement, we can install a Sump Pump for you.

Or if you live in Moore and have water washing out your flower bed mulch, we can install a Surface Drain for you.

If you live in Yukon and need grass to grow, we can install Sod too!

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Sprinkler Valve Replacement

Edmond Sprinkler Repair

Oklahoma Drainage and Sprinkler Repair provide Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Check out Pictures of French Drains!

French Drain Installation

Oklahoma Drainage

has been diagnosing and solving Drainage Problems since 1993.  Water has the ability to get into places around your home where you really don’t want it to be.  Some drainage problems are easy to solve.  Typically, water enters the problem drainage area one way from one source.  The really tricky drainage problems occur when water enters the problem drainage area from multiple directions and from multiple sources.  Sometimes a secondary water source can’t be seen or identified until the primary water problem source is eliminated.

An example of this occurs when water is running into a problem area in an obvious way over the ground where you can see it.

Simple enough.

Channel Drain Across Driveway

French Drain Connected to a Channel Drain across the Driveway

A drainage system

is installed with a surface drain as the “intake” with drainage pipe running to an exit point.  Initially the water drains away, and everything looks great.  The next day water is back and is all around the surface drain, but below the edge and it hasn’t rained at all, so no additional water ran over the surface of the ground to flood the area.

The primary water source was solved, (The surface water run off) but the secondary water source was not.  Which was sub-surface water, (ground water) running into the area.  A surface drain can’t drain “ground water.”  A French Drain should have initially been installed instead of a Surface Drain.  A French Drain can drain both Surface Water and Ground Water.

Installing 4 Inch French Drain with trench Liner and pipe filter

The White Material is the Trench Liner. The black material is the Pipe Filter.

 

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps.

Providing Expert Sprinkler Repair – Broken Sprinkler Pipes – Sprinkler Head Adjustment – Sprinkler Valve Replacement

We provide Service for Folks in: Norman, Oklahoma City, Edmond, and Moore.

Central and Western Oklahoma is our Service Area since 1993.  

                                                           (405) 203-9419

 

 

 

 

Keep water off your driveway with a channel drain

 Standing water

comes from many sources.  It causes damage to sidewalks, driveways, and foundations not to mention plants, trees, and grass.  Does the side of your house flood because your neighbor doesn’t have gutters, or does your sidewalk turn into a moat after a heavy rain, or worst of all, is water seeping into your foundation and duct work after a thunderstorm? 

Theses are just a few of the Drainage Problems that Oklahoma Drainage and can help with.  We can design a Drainage System to fit your specific needs.  We install many types of Drains to solve many types of problems.    French Drains, Surface Drains, Channel Drains, Basement  Drains, Trench Drains, Basin Drains, and Sump  Pumps are utilized.

 

 

 

We just finished a 4-inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drainpipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Next

we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drainpipe to the Pop-Up Emitters on the back fence. Finally, we completed the Drainage System by installing a long run of 6-inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six-inch French Drain took even more limestone.

 Oklahoma Drainage –

Hey Oklahoma, we are expanding to service all of Western Oklahoma as well as Central Oklahoma.  If you live in Elk City, and need a French Drain, we can help.  If water is standing on your driveway in Clinton, Give us a call.  Duncan, Lawton, and Altus are all new areas of service for us.

Since 1993 Oklahoma Drainage and Sprinkler Repair has solved all types of standing water and drainage issues.  We install Drainage Systems that utilize French Drains, Surface, Drains, Channel Drains, and Sump Pumps depending on the customer’s needs.

If you have water in the wrong place, we can help!

 

French Drains as part of a Drainage System – 

Many times people use the term ” French Drain” as general name for a Drain used in or around your home.  French Drains are designed to move a lot of water over a large, flooded area.  They are also designed to take water in on the surface of the ground or below the surface of the ground.  This is very important if the water coming into the flooded area is moving through the ground or coming up from underneath.  ” Sub Surface Water Movement.”  The picture below is not a French Drain!

A French Drain looks like this

A French Drain Can Handle Standing Water

A Oklahoma French Drain Installation, Sprinkler Repair can take in water in a broad area.  It can move a much larger volume of water compared to a Surface Drain.  Also, it can move sub surface water moving into the area where a Surface Drain won’t move any water at all.

Surface Drains

are designed to move surface water only on a smaller scale in confined areas.

Each solves specific drainage problems.  A Drainage System may use one or both together or even several using many types of drains.

Do you have standing water

in a large area in your yard?  Typically, this calls for a French Drain.  A French Drain is a great way to control standing water in a large grassy area.  It can also protect areas from flooding to a certain degree.  As long as the French Drains capacity to move water is not exceeded.

If the French Drains capacity is exceeded, then water will stand in the drainage area until the rain stops and the drain has time to catch up.  A good way to prevent this is to install a bigger French Drain with a larger pipe.  The difference between a 3-inch French Drain and a 6-inch French Drain is huge.

Another way to beef up a French Drain is to connect gutter down spouts in front of the French Drain.  The water coming off the roof causes suction in the French Drain Behind it.  This greatly increases the French Drains ability to move water without increasing the size of the French Drainpipe.

This week

we installed a 6 Inch French Drain in Oklahoma City.  Water was running down the hill, under the back fence, into the back yard, across the sidewalk, and into the side door going into the garage.  After every heavy rain, water was getting into the garage.  We installed a 6 Inch French Drain across the back yard to divert the water.  We also connected the Gutter Down Spouts Directly into the French Drain.

Once the French Drain was downhill from the house, we changed from French Drainpipe to solid 6-inch ADS Drainpipe and continued across the front yard to the street.  Once at the curb, we cut the curb with a concrete saw and installed a Curb Outlet for the French Drain.  Problem solved!

Installing a French Drain outlet through the curb in Oklahoma City

Installing a French Drain outlet through the curb in Oklahoma City

 

 

We also install

a variety of other types of Drains.  Our Drainage Systems may utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, Basin Drains, and Sump Pumps.  In the past 21 years, we have installed French Drains to keep water away from home and business foundations, Surface Drains to keep water away from sidewalks and driveways, Trench Drains, and French Drains to keep standing water out of flowerbeds and yards, and Sump Pumps to remove water from basements and outdoor low lying areas.

French Drain with stepping stones

French Drain with steppingstones

 

French Drains

can be installed by themselves, or as part of a Drainage System that uses other French Drains,  Surface Drains, or other Drain combinations.  Typically, a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run alongside a home’s foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home underground (through sandy soil),

A French Drain is the only Solution for draining away water flowing underground.

 

Installation of a Drainage System, French Drain, In Norman Oklahoma

Installation of a Drainage System, French Drain, In Norman Oklahoma

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give us a call.

Or if you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain, We specialize in just that!

 

Servicing: Oklahoma City, Norman, Edmond, Midwest City, Del City, Moore, Yukon, Mustang, Purcell, Blanchard.

 

French Drain in Oklahoma City, Norman, Edmond, Yukon –

Posted: September 14, 2014 in Edmond Oklahoma French Drain, Moore Oklahoma French Drain, Norman Oklahoma French Drain, Oklahoma City French Drain
Tags: , , ,
4

FRENCH DRAIN IN OKLAHOMA CITY, NORMAN, EDMOND, YUKON

If you have water standing on your driveway, or if it is coming under your walls and getting into your AC vents, we can help.

Water might be standing in your yard?  Water may be getting into any number of places that you don’t want it to be.

Oklahoma Drainage has provided Drainage Solutions and Flood Prevention Solution since 1993.

French Drains can be Decorative and look great!

 

Completed Decorative French Drain

Water might be standing on your Driveway!

Channel Drain Installation

Channel Drain Installation

Drainage Systems have several basic parts.

Water Entry

Water Transition

Water Exit

 

Water entry is the process where water enters the Drainage System.  This done with water entering drain pipe through a French Drain.  Water flows to a low area with a trench.  In the bottom of the trench is a Perforated French Drain Pipe with a liner or a soc.  Gravel or crushed limestone fills the trench on top of the French Drain Pipe.

French Drain connected into Drainage System

French Drain connected into Drainage System

Water can also enter a Drainage System through a Surface Drain.  Water flows to a Drainage Basin, falls through the grate and enters the Drainage Pipe below.

A third way for water to enter is to connect Gutter Down Spouts Directly into a Drainage System.

 

Connecting Gutter into French Drain System

Connecting Gutter into French Drain System

Connecting Gutter to french Drain

Connecting Gutter to French Drain

 

Water Transition is moving water through Drain Pipe to the Exit Point.

Installation of a Drainage System, French Drain, In Norman Oklahoma

Installation of a Drainage System, French Drain, In Norman Oklahoma

Exit points are either Pop-Up Emitters or Curb outlets.

Curb outlet for a French Drain

Curb outlet for a French Drain

 

What Size Drainpipe? for French Drains? Oklahoma City, Norman, Edmond, Yukon-

Posted: September 10, 2014 in french drain, French Drain Repair
Tags: , , ,
2

What size Drainpipe for a French Drain?

Oklahoma Drainage– We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water damaging your foundation, We can install a French Drain for you.

If you live in Norman and have water standing on your driveway, We can install a Channel Drain for you.

If you live in Edmond and have water flooding your basement, We can install a Sump Pump for you.

If you live in Moore and have water washing out your flower bed mulch, We can install a Surface Drain for you.

If you live in Yukon and need grass to grow we can install Sod too!

Servicing All Of Central And Western Oklahoma Since 1993.

 

Decorative French Drain

Decorative French Drain

WHAT SIZE DRAINPIPE FOR FRENCH DRAINS?

ads 4inch 6 inch

ADS Drain Pipe, 6 Inch on the left, 4 Inch on the right.

 

French Drains can be decorated with many types of stone

French Drains can be decorated with many types of stone

French Drains can utilize several types and sizes of French Drainpipe.  An older type that is not commonly used any more is 4-inch PVC Pipe with large half inch holes drilled in the Pipe.

This doesn’t work very well,

Because the holes are too large and the number of holes in the French Drainpipe are too few.

Also, there is no filter or “Soc” around this particular French Drainpipe.  If it is used in sandy or loose soil the holes will clog and the pipe will fill up with sand.  PVC French Drainpipe should be avoided.

ADS French Drainpipe is much better; the holes are smaller and much more numerous.  It also comes inside a soc that acts as a filter and helps keep sand and debris out of the French Drainpipe.  It works very well.

French Drain in flowerbed

French Drain in flowerbed

For Small business and Residential French Drains,

Four inch ADS Perf/Soc French Drainpipe is adequate and the most common.  It is used for the majority of all French Drains installed.  French Drains can be installed using 3-inch ADS Perf/Soc but many times it is too small and can be overwhelmed by a heavy rain or from a bad design.  (Too many gutters down spouts connected directly into the French Drain, For Example)  Three Inch French Drainpipe should be avoided if possible.

Six inch ADS Perf/Soc French Drainpipe is usually a good idea when possible.  It carries a much larger volume of water.  Six Inch French Drains are rarely overwhelmed.

Installing Gravel on top of a 6 inch French Drain

Installing Gravel on top of a 6 inch French Drain

 

The Drawbacks to 6-inch French Drain installation are:

 
 
1.  The Materials Cost is higher for six-inch French Drain Compared to Four Inch Pipe.
                                                                                                                    2.  Many times 6 Inch French Drain Pipe is too large for many applications, Such as going under a fence or sidewalk.  
                                                                                                                   3.  The trench for a 6 inch French Drain must be much larger than a 4 Inch
                                                                                                                   4.  The amount of gravel or limestone or River Rock used to Cover the 6 inch French Drain is Much larger
 
All things being considered, the performance and longevity of a 6-inch French Drain is well worth it if you are trying to protect something of value to you!  If the higher cost and the additional labor and materials are not a problem and 6 inch French Drain pipe is not too big for what you want to do then a 6 inch French Drain would be the best.  
 
 

French Drain Installation or Do You Need A Surface Drain?

Many Folks don’t know the difference.   Actually there are many differences and a few similarities.  One difference is, a French Drain takes in a larger amount of water into the drain Pipe than a Surface Drain.  There are advantages to Surface Drains as well.

 

A French Drain Is a Perforated Drainpipe in a Trench with Gravel or Limestone covering the trench with the pipe.  Many times there is a “Sock” around the pipe to act as a filter.

Oklahoma Drainage — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Servicing all of Central and Western Oklahoma since 1993.

French Drains as part of a Drainage System – 

Many times people use the term ” French Drain” as general name for a Drain used in or around your home.  French Drains are designed to move a lot of water over a large, flooded area.  They are also designed to take water in on the surface of the ground or below the surface of the ground.  This is very important if the water coming into the flooded area is moving through the ground or coming up from underneath.  ” Sub Surface Water Movement.”  The picture below is not a French Drain!

A French Drain looks like this

A French Drain Can Handle Standing Water

A French Drain can take in water in a broad area.  It can move a much larger volume of water compared to a Surface Drain.  Also, it can move sub surface water moving into the area where a Surface Drain won’t move any water at all.

Surface Drains are designed to move surface water only on a smaller scale in confined areas.

Each solves specific drainage problems.  A Drainage System may use one or both together or even several using many types of drains.

Do you have standing water in a large area in your yard? 

Typically, this calls for a French Drain.  A French Drain is a great way to control standing water in a large grassy area.  It can also protect areas from flooding to a certain degree.  As long as the French Drains capacity to move water is not exceeded.  If the French Drains capacity is exceeded then water will stand in the drainage area until the rain stops and the drain has time to catch up.  A good way to prevent this is to install a bigger French Drain with a larger pipe.  The difference between a 3 inch French Drain and a 6 inch French Drain is huge.

Another way to beef up a French Drain is to connect gutter down spouts in front of the French Drain.  The water coming off the roof causes suction in the French Drain Behind it.  This greatly increases the French Drains ability to move water without increasing the size of the French Drain Pipe.

Gutter Downspout Connected to 6 Inch French Drain

 

Oklahoma Drainage

recently diagnosed a Drainage Problem in  South Oklahoma City.  The Homeowner had a sump Pump in their basement that was fed from a French Drain outside the Basement Wall.  The French Drain was 14 feet down along the Stem wall of the house.  The French Drainpipe was cheap and had collapsed.  We brought in a Mini Excavator and dug up the pipe and replaced it with Durable ADS 4 inch perf/soc French Drainpipe.  In the end, we were able to dig up the pipe and Replace it.

New Trench for French Drain

Next, we installed a new exit for the water by installing a curb fitting.

No more flooding in the customers basement.  A few weeks later our customer was able to lay carpet in the basement with no problems.

 

French Drain in tree roots -Sprinkler Repair- Oklahoma City, Servicing Chickasha, Duncan, Clinton, Altus

Posted: September 7, 2014 in Drain Repair, Edmond Oklahoma French Drain, french drain, Sprinkler Repair
Tags: , , , ,
12

French Drain Installation in Tree Roots can be difficult.  We have solved this problem since 1993.

 

 

Oklahoma Drainage– We install French Drains, Channel Drains, Surface Drains, Sump Pumps and Sod.

If You live in Oklahoma City and water damaging your foundation, We can install a French Drain for you.

If you live in Norman and have water standing on your driveway, We can install a Channel Drain for you.

If you live in Edmond and have water flooding your basement, We can install a Sump Pump for you.

If you live in Moore and have water washing out your flower bed mulch, We can install a Surface Drain for you.

If you live in Yukon and need grass to grow we can install Sod too!

Servicing All Of Central And Western Oklahoma Since 1993.

French Drain Installation, Drainage Systems, Surface Drain, Sump pumps, – Oklahoma Drainage

Hard rain and flooding seem to be more common all the time.  When I started this business in 1993, having over an inch of rainfall in an hour was pretty extreme.  Now having over 4 inch an hour rainfall is not unheard of and is becoming more common.

Protecting our homes and businesses from unwanted water should be a goal for all of us.

Oklahoma Drainage has seen and dealt with virtually every possible Drainage and Standing water problem that can occur in or around your home.  With over 2000 Drainage Systems installed since 1993, we have amassed a great deal of experience.  This is help full in seeing underlying problems and secondary issues that may be hard to see at first for the ” Untrained Eye.”  This allows us to get things right the first time.  In this business EXPERIENCE TRULY COUNTS!

Hiring your brother in law to put in your Drainage System or French Drain is as bad as hiring a Lawn mowing company that does landscaping and drains too?  Water can cause a huge amount of damage.  How important is your money and your home?

Blane Callen, 405 203 9419

Is this your yard?

This is a great place for a French Drain

Installing French Drain under sidewalk

Installing French Drain under sidewalk

Installing Channel Drain

Installing Channel Drain

French Drain Installation this week was a little more difficult than normal.  Many times, the route that a Perforated French Drainpipe must travel to its exit point is not very easy from an installation point of view.

French Drains may have to travel through tree roots, (big ones) under sidewalks, through retaining walls, around swing sets or dog kennels or Mom’s Prize Rose Bush.

The 4 inch French Drain we installed this week was in Oklahoma City south of 23rd in an old part of town where all the houses were old 2 or 3 story homes with lots of huge Elm Trees.

The Elm Tree in Question actually was just an old stump that had been topped out but not completely removed.  They left the roots just for us!  The roots were growing into the homes foundation and were right in the way of the path of the French Drain.

Forty feet of solid Elm Roots and 4 chain-saw blades later We were successful in running a new French Drain through a tree stump.  Yuck! “Well you gotta  do what you gotta do!”

 

 

French Drain with colored river rock

French Drain with colored river rock

A little info about French Drainpipe and Tree Roots.  Normally tree roots don’t seek out and penetrate French Drainpipe.  Tree roots seek moisture and residual water that may stay inside Solid Drainpipe.  French Drainpipe is perforated.  Water that does not reach the exit point of the French Drain will seep out of the Pipe into the surrounding dirt.  Solid Drain Pipe that is used with Surface Drains can be penetrated and eventually clogged by roots if the pipe does not have good slope or “Fall”.  If the solid pipe does not drain well and has residual water, tree roots will seek it out.

 

Sprinkler Repair Service Provided by Oklahoma Drainage and Sprinkler Repair

Since 1993 we have Replaced Sprinkler Valves that were sticking or were wore out.

Thousands of Sprinkler Heads have been adjusted.

Countless Sprinkler Controllers have been Reprogramed or Replaced.

We also have fixed a broken Sprinkler Pipe or Two.  Seems like a million.  Ok, not that many.

I wonder how many?  A lot!!!!

Oklahoma Drainage and Sprinkler Repair provides Service for all of Central Oklahoma Including:  Oklahoma City, Norman, Edmond, Moore, Yukon and Mustang.

Older Entries
Newer Entries